Autodesk Hsmworks Ultimate Multilanguage 2019 (x64)
The Integrated CAM Solution for Autodesk Inventor:
Autodesk HSM is designed from the ground up to work inside Inventor, providing a
logical extension of the parametric Inventor environment into the CAM world. Experienced
Inventor users will feel right at home working with Autodesk HSM and will be able to create
high-quality toolpaths within minutes. New users will benefit from the unmatched modeling
and simulation capabilities of Inventor mechanical design solutions and quickly extend any
knowledge gained to the CAM process, resulting in improved design quality and reduced product development time.
Autodesk HSM is a fully integrated CAM application for Inventor and Inventor LT.
Depending on your version of Inventor HSM, effective generation of high quality 2D, 3D, 5-axis
milling, and turning toolpaths for high speed machining are provided.
The Autodesk HSM interface is designed for Inventor users and machinists alike.
If you know Inventor, getting to know Autodesk HSM will be easy and straightforward.
New Features:
Added Both-Ways Adaptive Clearing
Added support for 2D Adaptive Clearing
Added Tool Orientation to Probing (#9410)
Added support for tapered walls in 2D Adaptive
Added API method to get objects in a job
Added API method to identify whether an object is a pattern
Added support for setting stock for HSMWorks API
Changes:
Fixed compensation in control/wear for turning ID machining.
Fixed issue where duplicating an operation within a job causes operation to
be unnecessarily marked dirty.
Fixed wrong multi-axis handling for feed optimization.
Changed guided deep drilling to use retract feedrate
Fixed issue where tool is not always taken to limit when rewind is required
Fixed out of memory error when using nested patterns with the Excel Setup Sheet
Fixed issue where rest machining does not calculate when preceded by a manual
NC operation in turning operations
Toolpath:
Fixed bad ordering issue when using both ways for Adaptive Clearing.
Fixed fragmentation of circular cutting passes and missing potential missing cut passes for turning when using rest machining.
Fixed wrong toolpath issue when using negative radial stock to leave for turning.
Fixed issue where the same cutting pass could be repeated when using rest machining for turning.
Improved rest machining quality for Turning Profile/Grooving.
Fixed potential issue where Turning Profile could ignore an area of the given part.
Fixed wrong ordering issue for 2D Contour.
Fixed wrong toolpath issue for Turning Grooving.
Fixed potential generation failure for Adaptive Clearing.
Fixed potential generation failure for Adaptive Clearing.
Fixed issue where lead would hit stock for Turning Grooving.
Fixed issue where cutting feedrate would be used instead of lead/in/out feedrate
for certain linking moves for Adaptive Clearing.
Fixed missing compensation in control when using back trimming of cutting passes for 2D Contour.
Fixed preserve order when using roughing passes for 2D Contour/Pocket.
Fixed potential lead-out issue when using back cutting (Sandvik PrimeTurning) for Turning Profile.
Fixed issue where Adaptive Clearing was not using plunge feedrate.
Improved lead-in for finishing passes by extending beyond the safe distance for 2D Contour.
This will avoid skipped passes in additional cases.
Improved linking for Adaptive Clearing to avoid stay further away from stock when moving down outside of stock.
Fixed issue where the minimum cutting radius setting affected 2D Contour toolpaths when it shouldn't
Post library:
dded support for subprograms for Robodrill post.
Added post for Messer plasma.
Updated retract and coolant handling for DATRON MCR posts.
Added support for left-handed tapping and a self-reversing tapping head for Tormach PathPilot post.
Improved tailstock handling for Okuma LB3000 post.
Patterned operations can now be output using XYZ mode for HAAS mill-turn posts.
Fixed various issues for different machine types for Techno CNC Router post.
Fixed incremental Z output for Biesse CIX post.
Fixed retract handling for Bridgeport DX-32 post.
Fixed handling of machine orientation when using subprograms for posts.
Fixed retract handling for DATRON posts.
Fixed tailstock support for mill-turn posts.
Fixed tailstock support for Okuma LB3000 mill-turn posts.
Fixed tailstock support for HAAS mill-turn posts.
Updated G187 for HAAS posts.
Updated tool call handling for Grbl post.
General improvements for DATRON next post.
Improved retract and coolant handling for Siemens 802D post.
Improved retract and coolant handling for posts.
Updated work plane handling for posts.
New installation:
-SOLIDWORKS must be installed prior to installing HSMWorks
-Before you install HSMWorks 2019, please make sure to run Windows Update,
install all Windows Updates that are pending on your machine, and reboot:
-For Windows 10: Windows Update is available in the Update and Security section of Windows Settings, which is available from the Windows menu.
-Windows 8 and Windows 8.1: Windows Update is located in the Control Panel, which is accessible on the desktop Charms Bar, Settings menu.
-Windows 7: Windows Update is located in the Control Panel, which is accessible from the Start menu.
-It is sometimes necessary to perform a Windows Update multiple times to completely update your operating system
-Verify that enough disk space is available on your machine to install HSMWorks 2019
(approx. 2 GB).
Before installing HSMWorks 2019, please uninstall all prior Autodesk beta products.
Download From UploadGig
Код:
https://uploadgig.com/file/download/e25b4decDE9b5489/BaDshaH_AUTODESK.HSMWORKS.ULTIMATE.MULTI.V2019.x64.rar
Download From Rapidgator
Код:
https://rapidgator.net/file/7b8456488688a405814b0978d66a739f/BaDshaH_AUTODESK.HSMWORKS.ULTIMATE.MULTI.V2019.(x64).rar.html
Код:
https://filefox.cc/7spdb0ultngi
