All mitsumi'1s Applications !! (updated daily)

[mitsumi1]

ANSYS Lumerical 2020 R2.1 | 1.3 Gb

The Lumerical development team is pleased to announce the availability of Ansys Lumerical 2020 R2.1. This comprehensive software suite provides a comprehensive set of tools for the design and analysis of integrated photonic components and systems, similar to the traditional electronic design automation (EDA) environment.

Ansys has acquired Lumerical, the leader in high-performance silicon photonic simulation. The acquisition of Lumerical will enable Ansys customers to predict light's behavior within complex photonic structures and systems. Ansys provides a comprehensive solution for semiconductors and high-performance electronics, and with the acquisition of Lumerical, we are extending Ansys' capabilities to address the challenges of the photonic industry.

Silicon photonics is an expanding market and Lumerical provides a comprehensive set of tools for the design and analysis of integrated photonic components and systems, similar to the traditional electronic design automation (EDA) environment. Lumerical complements Ansys SPEOS by serving as a de facto light source for predicting the illumination and optical performance of systems such as interior automobile lighting.

Founded in 1970, ANSYS employs nearly 3,000 professionals, many of whom are expert M.S. and Ph.D.-level engineers in finite element analysis, computational fluid dynamics, electronics, semiconductors, embedded software and design optimization. Our exceptional staff is passionate about pushing the limits of world-class simulation technology so our customers can turn their design concepts into successful, innovative products faster and at lower cost. As a measure of our success in attaining these goals, ANSYS has been recognized as one of the world's most innovative companies by prestigious publications such as Bloomberg Businessweek and FORTUNE magazines.

Product: ANSYS Lumerical
Version: 2020 R2.1 *
Supported Architectures: x64
Website Home Page : [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...] / [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]
Language: english
System Requirements: PC **
Size: 1.3 Gb

Lumerical CHARGE 3D Charge Transport Simulator
Lumerical FDTD 3D/2D Maxwell's Solver for Nanophotonic Devices
Lumerical DGTD 3D Electromagnetic Simulator
Lumerical STACK Optical Multilayer Simulator
Lumerical FEEM Waveguide Simulator
Lumerical HEAT 3D Heat Transport Simulator
Lumerical INTERCONNECT Photonic Integrated Circuit Simulator
Lumerical MODE Waveguide Simulator

ANSYS Lumerical Software supports the following operating systems (64-bit editions only):
- Windows 8.1, 10
- Windows Server 2012 R2, 2016, 2019

Lumerical software supports the following technologies:
- Amazon EC2
- Microsoft Azure
- HPC network technologies including: Infiniband, Myrinet, Gb and 10Gb Ethernet
- MPI frameworks: Microsoft MPI, MPICH, OpenMPI, IntelMPI and other
- commercial MPI distributions
- HPC schedulers: SGE, PBS Pro, OpenPBS, Platform LSF, HTCondor, etc.

Lumerical software has limited support on other operating systems that are known to be compatible with the supported systems listed above such as Fedora and Open SUSE.

Lumerical's Finite Element IDE (FE IDE) uses a 3D rendering and visualization library that requires a compliant implementation of OpenGL 2 or DirectX 11. For optimal performance, please install the FE IDE directly on a locally accessible host computer with adequate graphics resources and up-to-date graphics drivers. The FE IDE has limited support on systems without compliant graphics drivers, including virtual machines and remote desktop interfaces.

Download link:

rapidgator_net:
https://rapidgator.net/file/51cdaaa06a4953bdcae713204fe6c8f5/jo53v.ANSYS.Lumerical.2020.R2.1.part1.rar.html
https://rapidgator.net/file/9070490189697075661eebb91be6525b/jo53v.ANSYS.Lumerical.2020.R2.1.part2.rar.html
https://rapidgator.net/file/b8e330cfced942eda6d557b66fe1ba25/jo53v.ANSYS.Lumerical.2020.R2.1.part3.rar.html
https://rapidgator.net/file/23a31de82f02ee4221763a900e0b0f15/jo53v.ANSYS.Lumerical.2020.R2.1.part4.rar.html
https://rapidgator.net/file/89b1e3bb68795c9d06375aa16ba3c7ae/jo53v.ANSYS.Lumerical.2020.R2.1.part5.rar.html

nitroflare_com:
https://nitroflare.com/view/2A8472AEAFA37D5/jo53v.ANSYS.Lumerical.2020.R2.1.part1.rar
https://nitroflare.com/view/1B3025D2B14F5C5/jo53v.ANSYS.Lumerical.2020.R2.1.part2.rar
https://nitroflare.com/view/6502219572E86D8/jo53v.ANSYS.Lumerical.2020.R2.1.part3.rar
https://nitroflare.com/view/81C865828CAA21F/jo53v.ANSYS.Lumerical.2020.R2.1.part4.rar
https://nitroflare.com/view/98C1FD8A57CD5AB/jo53v.ANSYS.Lumerical.2020.R2.1.part5.rar

uploadgig_com:
https://uploadgig.com/file/download/1DA0495b660213c4/jo53v.ANSYS.Lumerical.2020.R2.1.part1.rar
https://uploadgig.com/file/download/53ded552946a5e50/jo53v.ANSYS.Lumerical.2020.R2.1.part2.rar
https://uploadgig.com/file/download/fb4f4C841d6ee2d2/jo53v.ANSYS.Lumerical.2020.R2.1.part3.rar
https://uploadgig.com/file/download/8608AFb2b4Ed3631/jo53v.ANSYS.Lumerical.2020.R2.1.part4.rar
https://uploadgig.com/file/download/b04F4F349930c222/jo53v.ANSYS.Lumerical.2020.R2.1.part5.rar

Links are Interchangeable - No Password - Single Extraction

[mitsumi1]

ANSYS Motor-CAD 13.1.11 | 493.4 mb

Motor Design, a ANSYS business, announced the latest release of Motor-CAD 13.1.11 is unique software package dedicated to the electromechanical performance of motors and generators and the optimisation of their cooling.

ANSYS Motor-CAD is a dedicated electric machine design tool for fast multiphysics simulation across the full torque-speed operating range. Motor-CAD enables design engineers to evaluate motor topologies and concepts across the full operating range, to produce designs that are optimized for performance, efficiency and size. Motor-CAD software's four integrated modules-EMag, Therm, Lab, Mech-enable multiphysics calculations to be performed quickly and iteratively, so users can get from concept to final design in less time. Motor-CAD's intuitive, template-based setup simplifies and automates the analysis process while its built-in electromagnetic, thermal and mechanical solvers offer valuable multiphysics insights into a motor design. The simulations can be completed in a matter of seconds thus allowing ample time and scope for extensive design space exploration. ANSYS Motor-CAD enables engineers to produce optimized electric motor and generator designs to help meet the size, weight, energy efficiency, cost and other specifications.

For deep analysis and validation of the motor design the Motor-CAD model can be transferred to ANSYS Maxwell, ANSYS Icepak and ANSYS Fluent. Combining these solvers with Motor-CAD delivers high-fidelity, 2D/3D analysis capability enabling users to analyze end-effects, demagnetization, core loss, hysteresis and other advanced electromagnetic phenomena, calculate the thermal envelope for operation and design complete motor cooling systems.

Interested in understanding more about multi-physics electric motor design and simulation using the Motor-CAD software tool? Watch our video tutorial.

Motor Design Ltd is a strategic software partner to ANSYS Inc, a global leader in engineering simulation software. The software links between Motor-CAD and ANSYS, provide a seamless approach to modelling and analysing electric motor designs. The two technologies work well together, taking designs from concept to production through the complete product development life cycle.

Founded in 1970, ANSYS employs nearly 3,000 professionals, many of whom are expert M.S. and Ph.D.-level engineers in finite element analysis, computational fluid dynamics, electronics, semiconductors, embedded software and design optimization. Our exceptional staff is passionate about pushing the limits of world-class simulation technology so our customers can turn their design concepts into successful, innovative products faster and at lower cost. As a measure of our success in attaining these goals, ANSYS has been recognized as one of the world's most innovative companies by prestigious publications such as Bloomberg Businessweek and FORTUNE magazines.

Product: ANSYS Motor-CAD
Version: 13.1.11.1
Supported Architectures: x64
Website Home Page : [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]
Language: english
System Requirements: PC *
Size: 493.4 mb

Minimum System Requirements

The following Operating Systems are supported:

- Windows 7 (64 bit)
- Windows 8 (64 bit)
- Windows 10 (64 bit)

Processor: Intel i7 2GHz or equivalent
At least 2GB of memory
At least 1GB of hard disk spac
Minimum screen resolution of 1024 x 768 with at least 256 colours
Microsoft compatible mouseNote: Motor-CAD does not support large fonts in Windows.

Optimal system configuration

For optimal configuration of Motor-CAD there are a few different considerations:

- Motor-CAD BPM Lab willmake use of multiple threads in order to build the motor model. To allow this to be done12 to16 hardware cores/threads is recommended. There is not any increase in performance with more than 16 cores.
- All other machine and calculation types will benefit from a high clock speed as they use single-threaded calculations.
- Installing Motor-CAD and running models from an SSD drive will allow Motor-CAD to run more quickly due quicker file access. It is recommended to run models from a local driveasthe results files are saved relative to the model file.

Download link:

rapidgator_net:
https://rapidgator.net/file/e74c58f0116a04e3700ee69d5f29a81d/r38ad.ANSYS.MotorCAD.13.1.11.rar.html

nitroflare_com:
https://nitroflare.com/view/ACC31ED1A51BA3C/r38ad.ANSYS.MotorCAD.13.1.11.rar

uploadgig_com:
https://uploadgig.com/file/download/92ac4286c4Aff2Ae/r38ad.ANSYS.MotorCAD.13.1.11.rar

Links are Interchangeable - No Password - Single Extraction

[mitsumi1]

IronCAD Design Collaboration Suite 2020 PU1 SP1 | 2.2 Gb

IronCAD today officially introduces the first update for IRONCAD 2020, the latest release from the leader in design productivity of 3D CAD programs and preferred software of Machine Designers and Engineers globally.

The IRONCAD 2020 Product Update #1 (PU1) features exciting enhancements and capabilities that enable IronCAD users to accelerate productivity and improve product development, from conceptual design to manufactured products, and create value for their organizations.

Designed with a focus on performance, quality improvements, and design productivity, IronCAD's research and development team delivered IRONCAD 2020 PU1 in response to enhancement requests from the IronCAD community around the world. With the many new capabilities and enhancements in PU1, users can benefit from an array of options and opportunities to improve system performance in their daily operations, streamline workflows and seek new levels of collaboration and agility to more quickly and cost-effectively deliver products to their customers.

Among the many new improvements and capabilities in IRONCAD 2020 Product Update #1 are:

- Open/Save/Import Performance: Continued improvements have been performed in this area to reduce the load/save times of extremely large assembly data sets to improve the overall performance when designing with large assembly files.

- IronCAD Drawing (ICD) View Creation/Update - Improvements have been made to improve the view creation and view update speed in the drawing environment, especially with large assembly files.

- IronCAD Drawing (ICD) View Camera Performance - New options to control functions additional performance settings have been added to aid in the overall camera interaction performance when interacting and detailing drawings.

Further improvements within Product Update #1 also include enhanced general quality improvements to the 2D Technical Drawing Area. Aligned with IronCAD's position as a productivity leader for CAD software, PU1 also boasts improvements to the Bulk View Creation for automated drawing creation, including new search capabilities and creation from a selected set of parts/assemblies. Additional productivity improvements in PU1 improve the Sheet metal capabilities for Out/In Bend Automatic alignment to the angled stock, Quick Access commands added to right-click menus to improve speed and visibility in accessing commands as well as improvements to now create singled drawing sheets quickly from the selected elements in the scene.

IronCAD Design Collaboration Suite is an intuitive 3D design productivity solution that empowers users, increases efficiency, and extends 3D collaboration throughout the enterprise.

The IRONCAD 2020 release delivers improved large assembly performance, streamlined workflows, and new capabilities that help users design, present, and communicate their ideas faster and easier. This year's release, the main focus was on improving the ICD (IronCAD Drawing Environment) to increase productivity. With this in mind, our goal was to improve the 3D to 2D detailing process to reduce the design to manufacturing timing with better performance, improved commands, better accessibility to common commands, faster drawing creation with our automated bulk view creation tool that enable users to go from concept to manufactured products faster.

Beyond the IronCAD Drawing Environment, IronCAD delivered performance improvements for working with large assemblies. This significant development was implemented to increase the system's performance and to take advantage of newer hardware with multiple cores. In addition, many functional items were added to streamline the interaction with large assemblies, such as additional improvements in our Shrink Wrap commands for condensing large assemblies into workable reference geometry. With IronCAD 2020, noticeable improvements can be found importing, opening, saving, and working daily with large assembly files.

IronCAD - Design Faster, Better, and Become Truly Productive

Based in Atlanta, Ga., IronCAD is a leading provider of 3D design productivity solutions that deliver the highest levels of customer satisfaction and productivity. Individual components of this solution can be used standalone, complementary within an existing design environment, or can be used together to collaborate effectively throughout the enterprise to extend productivity. IronCAD's flagship product IRONCAD has won many industry awards for its innovative technology and leads the industry in its ease of use and design productivity. Thousands of customers worldwide use IronCAD to support their success.

Product: IronCAD Design Collaboration
Version: Suite 2020 PU1 SP1
Supported Architectures: x64
Website Home Page : [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]
Language: english
System Requirements: PC *
Size: 2.2 Gb

The IronCAD Design Collaboration Suite, including IRONCAD, INOVATE, IRONCAD DRAFT, and IRONCAD COMPOSE, is a Windows-based design software. Version 2018 and newer supports only 64-bit versions of the Windows operating system. Previous versions support both 32 and 64-bit on supported operating system platforms.

Your PC will need the following to run IronCAD:
- 64-Bit Window Operating System (Windows 7even and above)
- A Pentium 4 CPU or higher (current AMD processors supported)
- 4GB Recommended (8 GB or more for large assembly work)
- Direct X and/or OpenGL compatible accelerated video graphics card (required for large assembly work)
- 2 GB of free disk space to install. More recommended for design data.

Example certified machine configuration:
- HP Z240 Workstation
- CPU: E3-1240 V5 @3.50 GHZ
- OS: Windows 10 64-bit
- RAM: 16 GB
- Graphics Card: Nvidia Quadro K620 with 2 GB Memory
- Hard Disk: NVMe Samsung M2VPV128 SSD 128 GB

Download link:

rapidgator_net:
https://rapidgator.net/file/f087bac15604a694b3491df87c7f611b/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part1.rar.html
https://rapidgator.net/file/533697dccffbc3fad30752c11649c952/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part2.rar.html
https://rapidgator.net/file/df870fc5651c1d972d3c2a8925a0fb40/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part3.rar.html
https://rapidgator.net/file/ad2e3bf8980d09ee717fb6d60cc9b2ed/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part4.rar.html
https://rapidgator.net/file/c189737d0dcd310188681fddbb5a00cc/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part5.rar.html
https://rapidgator.net/file/1a4f3fee1e56590e2f3608b63fd12aad/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part6.rar.html
https://rapidgator.net/file/4f22726f22358712fa13b000612c1808/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part7.rar.html

nitroflare_com:
https://nitroflare.com/view/6A25B4879688435/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part1.rar
https://nitroflare.com/view/325DE60C3A2F2D0/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part2.rar
https://nitroflare.com/view/CF5D42303273027/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part3.rar
https://nitroflare.com/view/BAA27E420B38516/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part4.rar
https://nitroflare.com/view/2AB190519E09ACD/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part5.rar
https://nitroflare.com/view/9646D8C055BC81A/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part6.rar
https://nitroflare.com/view/2D79F36AB32D828/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part7.rar

uploadgig_com:
https://uploadgig.com/file/download/8f95eF698E81cA09/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part1.rar
https://uploadgig.com/file/download/1F020b4f97f21A95/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part2.rar
https://uploadgig.com/file/download/67AF4f3a4fe916E5/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part3.rar
https://uploadgig.com/file/download/8018B8f455F8767b/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part4.rar
https://uploadgig.com/file/download/E35564b0ff3F5445/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part5.rar
https://uploadgig.com/file/download/28c88fA7c7a8fE37/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part6.rar
https://uploadgig.com/file/download/9293e7863816bdfE/meae1.IronCAD.Design.Collaboration.Suite.2020.PU1.SP1.part7.rar

Links are Interchangeable - No Password - Single Extraction

[mitsumi1]

Keil MDK-ARM 5.31 with DFP (build 20202508) | 1.6 Gb

The Keil development team is pleased to announce the availability of Keil MDK-ARM 5.31 is the most comprehensive software development solution for Arm-based microcontrollers and includes all components that you need to create, build, and debug embedded applications.

MDK Version 5.31 is mostly a bug fix release for MDK 5.30. It also improves editing experience in multi-project workspaces and features an enhanced version of the source browser.

What's new in MDK 5.31 - Release Date: 2nd July, 2020

µVision

Improved editing experience in multi-project workspaces:
- Files open in the editor but not belonging to the active project are marked with a special icon
- Dynamic syntax checking and source browsing are disabled for files that are not part of the active project to avoid conflicts.
Added M-Profile Vector Extension window:

- Arm Compiler 6 is now the default compiler for all Arm Cortex-M based devices when starting a new project. For Armv6-M and Arvm7-M devices, Arm Compiler 5 can be selected.
- MDK-Essential and MDK-Lite additionally support secure and non-secure programming for Armv8-M.
- Introduced support for CPRJ and layers for continuous integration (CI) workflows using CMSIS-Build.
- Improved FreeRTOS debugging: thread collection and stack unwinding.
- Added support for the unprivileged debug extension (UDE)
- Event Statistics: fixed a bug in thread events timing
- Code Coverage now available with FVP simulation models

Various new features and updates are available for ULINK and CMSIS-DAP debug adapters. Fixed Virtual Platforms (Fast Models) have been updated to version 11.10.22.

μVision Editor
Enhanced: Performance of Dynamic Syntax Checking and Source Browser Information collection improved.
μVision Run-Time Environment
Added: Support for condition attribute in api element.
μVision Build Engine
Corrected: '-D_RTE_' added to compiler command line despite no RTE components being selected in project.
Changed: Default optimization level setting for AC6 has been changed from -Oz to -O1.
μVision Debug
New: Source Browser information snapshot remains available while debugging also when using Arm Compiler 6.
New: Extended support for handling up to 480 external interrupt sources.
Improved: Display of STL container datatypes in Call Stack + Locals window.
μVision Product Licensing
Corrected: Displayed product version for MDK Plus FlexNet license.
Fixed: Code generation for ARMv8m targets and building secure projects with MDK Lite product variant fails.

MDK helps you to create embedded applications for ARM Cortex-M processor-based devices. MDK is a powerful, yet easy to learn and use development system. It consists of MDK-Core and software packs, which can be downloaded and installed based on the requirements of your application.

The MDK Tools include all the components that you need to create, build, and debug an embedded application for ARM based microcontroller devices. MDK-Core consists of the genuine Keil µVision IDE and debugger with leading support for Cortex-M processor-based microcontroller devices including the new ARMv8-M architecture. DS-MDK contains the Eclipse-based DS-5 IDE and debugger and offers multi-processor support for devices based on 32-bit Cortex-A processors or hybrid systems with 32-bit Cortex-A and Cortex-M processors. MDK includes two ARM C/C++ Compilers with assembler, linker, and highly optimize run-time libraries tailored for optimum code size and performance:

ARM Compiler version 5 is the reference C/C++ compiler available with a TÜV certified qualification kit for safety applications, as well as long-term support and maintenance.

ARM Compiler version 6 is based on the innovative LLVM technology and supports the latest C language standards including C++11 and C++14. It offers the smallest size and highest performance for Cortex-M targets.

Software packs contain device support, CMSIS libraries, middleware, board support, code templates, and example projects. They may be added any time to MDK-Core or DS-MDK, making new device support and middleware updates independent from the toolchain. The IDE manages the provided software components that are available for the application as building blocks.

You will learn how easy it is to get started with MDK Version 5 to efficiently develop embedded applications for microcontrollers based on ARM Cortex-M processors series.

Keil was founded in 1985 to market add-on products for the development tools provided by many of the silicon vendors. It soon became evident that there was a void in the marketplace that must be filled by quality software development tools. It was then that Keil implemented the first C compiler designed from the ground-up specifically for the 8051 microcontroller.

In October 2005, Keil (Keil Elektronik GmbH in Munich, Germany, and Keil Software, Inc. in Richardson, Texas) was acquired by ARM.

The Keil products from ARM include C/C++ compilers, debuggers, integrated development and simulation environments, RTOS and middleware libraries, and evaluation boards for ARM, Cortex-M, Cortex-R4, 8051, C166, and 251 processor families. Since the acquisition, ARM has continued the development and support of Keil products for existing 8051, 251, and C166 markets.

Product: Keil MDK-ARM
Version: 5.31 with MDK5 Software Packs DFP (build 20202508)
Supported Architectures: 32bit / 64bit
Website Home Page : [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]
Language: english
System Requirements: PC *
Size: 1.6 Gb

Minimum Hardware Requirements

- 1 GHz 32-bit or 64-bit processor
- 1 GB of system memory (RAM)
- 2 GB of available disk space

Recommended Hardware Requirements

- 2+ GHz 64-bit processor
- 4 GB of system memory (RAM)
- 5 GB of available disk space
- 2 Mpbs or higher Internet connection for software activation, product updates and online services like the PackInstaller

Supported Operating Systems

32-bit and 64-bit variants of Microsoft Windows are supported:

- Windows 10 Home
- Windows 10 Pro
- Windows 10 Enterprise
- Windows 10 Education

- Windows 8.1
- Windows 8.1 Pro
- Windows 8.1 Enterprise
- Windows 8
- Windows 8 Pro
- Windows 8 Enterprise

Software will be tested against the latest revision supplied by Microsoft. Beta Releases or Release Candidate versions of Windows are not recommended for productive use.

Note: Support for 32-bit Microsoft Windows has been deprecated in Q3/2018. Please make sure to switch to a 64-bit operating system.

Download link:

rapidgator_net:
https://rapidgator.net/file/7a8140adc20602bc520545f980d3e422/fn66o.Keil.MDK.ARM.531.part1.rar.html
https://rapidgator.net/file/1dc5d693b617330b21a856ddb039cfec/fn66o.Keil.MDK.ARM.531.part2.rar.html
https://rapidgator.net/file/42ff087f03553b553b4899da2ae2e7cf/fn66o.Keil.MDK.ARM.531.part3.rar.html
https://rapidgator.net/file/c08c38f75b47b2a8afc84712104d2e3f/fn66o.Keil.MDK.ARM.DFP.20202508.part1.rar.html
https://rapidgator.net/file/f8964c17f0c1ad47bded16cce5326183/fn66o.Keil.MDK.ARM.DFP.20202508.part2.rar.html
https://rapidgator.net/file/a13d18c1b920ed096dc739e28e1ebd5c/fn66o.Keil.MDK.ARM.DFP.20202508.part3.rar.html

nitroflare_com:
https://nitroflare.com/view/4336765E5AABB9E/fn66o.Keil.MDK.ARM.531.part1.rar
https://nitroflare.com/view/B7FFE0080B91ECD/fn66o.Keil.MDK.ARM.531.part2.rar
https://nitroflare.com/view/8AB9B8348C051FA/fn66o.Keil.MDK.ARM.531.part3.rar
https://nitroflare.com/view/A21634CCCA3A445/fn66o.Keil.MDK.ARM.DFP.20202508.part1.rar
https://nitroflare.com/view/76716BE1E400481/fn66o.Keil.MDK.ARM.DFP.20202508.part2.rar
https://nitroflare.com/view/773C524D858AC91/fn66o.Keil.MDK.ARM.DFP.20202508.part3.rar

uploadgig_com:
https://uploadgig.com/file/download/E49a491cc57cf165/fn66o.Keil.MDK.ARM.531.part1.rar
https://uploadgig.com/file/download/31CA84Be41eec617/fn66o.Keil.MDK.ARM.531.part2.rar
https://uploadgig.com/file/download/c3493Cdaebda0914/fn66o.Keil.MDK.ARM.531.part3.rar
https://uploadgig.com/file/download/b450c9E4eCd24596/fn66o.Keil.MDK.ARM.DFP.20202508.part1.rar
https://uploadgig.com/file/download/21e4C8ddc62441cF/fn66o.Keil.MDK.ARM.DFP.20202508.part2.rar
https://uploadgig.com/file/download/60230B28A5bb2576/fn66o.Keil.MDK.ARM.DFP.20202508.part3.rar

Links are Interchangeable - No Password - Single Extraction

[mitsumi1]

VideoScan 1.0.5 Multilingual | macOS | 16 mb

VideoScan displays hidden information about your multimedia documents. The application is able to analyze your files as well as the embedded audio and video streams. It provides you a lot of information, including the appearance of videos, the number of frames per second, the bit rate used, the sample rate of audio tracks, the number of available channels, and so on.

Supported information:

Container: format, profile, commercial name of the format, duration, overall bit rate, writing application and library, title, author, director, album, track number, date, duration.
Video: format, codec id, aspect, frame rate, bit rate, color space, chroma subsampling, bit depth, scan type, scan order.
Audio: format, codec id, sample rate, channels, bit depth, language, bit rate.
Text: format, codec id, the language of subtitle.
Chapters: count of chapters, list of chapters.

Supported formats:

Containers: MPEG-4, QuickTime, Matroska, AVI, MPEG-PS, MPEG-TS, MXF, GXF, LXF, WMV, FLV.
Metadata: Id3v1, Id3v2, Vorbis comments, APE tags.
Video: MPEG-1/2 Video, H.263, MPEG-4 Visual (including DivX, XviD), H.264/AVC, H.265/HEVC, FFV1.
Audio: MPEG Audio (including MP3), AC3, DTS, AAC, Dolby E, AES3, FLAC.
Subtitles: CEA-608, CEA-708, DTVCC, SCTE-20, SCTE-128, ATSC/53, CDP, DVB Subtitle, Teletext, SRT, SSA, ASS, SAMI.

Compatibility: macOS 10.13 or later 64-bit
Homepage: [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]

Download link:

rapidgator_net:
https://rapidgator.net/file/0b318f100b5077f7264ca60389ae5fb5/k0z5j.VideoScan.1.0.5.rar.html

nitroflare_com:
https://nitroflare.com/view/8DA72A6A48A2E66/k0z5j.VideoScan.1.0.5.rar

uploadgig_com:
https://uploadgig.com/file/download/e54b758a8772f538/k0z5j.VideoScan.1.0.5.rar

Links are Interchangeable - No Password - Single Extraction

[mitsumi1]

TunePat Netflix Video Downloader 1.2.4 Multilingual | 74.1 Mb

TunePat Netflix Video Downloader is the best solution to help you enjoy Netflix movies & TV shows on any devices without spending internet traffic and without disrupting Netflix limitations.

With TunePat Netflix Video Downloader, you can enjoy Netflix movies and TV shows on iPhone, iPad, Android phones & tablets, TV and any other MP4 compatible devices as well.

Support downloading HD Netflix video
As an HD video downloader for Netflix, TunePat Netflix Video Downloader supports downloading HD Netflix video, and allows you to choose the original quality video from Low Quality (240p) up to High Definition (HD - 1080p or 720p)!
TunePat Netflix Video Downloader allows you to select the output video quality in three level (High, Middle, and Low), thus meeting the need to save different quality of videos.

Keep audio tracks and subtitles
TunePat Netflix Video Downloader supports downloading Netflix movies and TV shows with all subtitles and audio tracks retained and provides the same experience as viewing on Net.

Fast, flexible and easy-to-use
TunePat Netflix Video Downloader provides a faster way to download videos from Netflix by parsing the URL of Netflix videos.
Easy to use! Just copy any NetFlix video URL, paste it, click the 'Download' button, wait for a little and enjoy it!

Operating System: Windows 10/8.1/8/7

Home Page - [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]

Download link:

rapidgator_net:
https://rapidgator.net/file/55b714169e22c258509cff9a0788feaf/1d8o8.TunePat.Netflix.Video.Downloader.1.2.4.Multilingual.rar.html

nitroflare_com:
https://nitroflare.com/view/01157D49AE4923E/1d8o8.TunePat.Netflix.Video.Downloader.1.2.4.Multilingual.rar

uploadgig_com:
https://uploadgig.com/file/download/1965319c03A5C199/1d8o8.TunePat.Netflix.Video.Downloader.1.2.4.Multilingual.rar

Links are Interchangeable - No Password - Single Extraction

[mitsumi1]

The Novel Factory 1.36.3 | 21.5 Mb

The Novel Factory is novel writing software specifically designed to help in every aspect of novel writing, from conception to publication. Writing a novel is hard. Writing a good novel is really hard. The Novel Factory makes it as straightforward as possible, by managing tedious data organisation, offering helpful advice and tips at just the right time and providing motivation and useful resources.

STEP-BY-STEP GUIDE TO WRITING A NOVEL
The Roadmap is an exclusive feature of The Novel factory. It guides new writers through a tried and tested step-by-step process from idea to final manuscript. The beauty of it is that you write your novel as you learn the craft of writing.

PLAN YOUR STORY ARC
The planning section gives you all the tools and structures you need to ensure the Description of your novel is solid, consistent and satisfying. It includes sections for premise, story skeleton, short synopses, extended synopsis and scene summaries.

YOUR CAST OF CHARACTERS
View all of your characters in the overview, or open them up to see full details, including introduction, basic info, questionnaire, viewpoint synopsis, history and notes. You can add multiple images to each character and categorise them as protagonist, antagonist, supporting, etc.

GET STUCK IN TO SCENES
The scenes tab gives you an overview of scenes and Description points. Once you open up each scene you can work on various drafts of that scene, associate characters and locations, add goal and conflict info and view or edit the scene synopsis. There is also space to note the time and weather of each scene.

CUSTOMISABLE WRITING SPACE
The writing view is designed to feel familiar and comfortable and to aid writing by keeping line widths within optimum readability standards. You can have your notes and the characters in that scene visible while you type, or dock them out of the way. The Novel Factory also features a full screen editing mode for distraction free working.

TARGETS AND STATISTICS
Keep an eye on your word count and see if you're on track to your novel's completion date. Set targets and watch your progress, average writing speed and novel breakdown.

Operating System: Windows Vista, 7, 8/8.1, 10

Home Page - [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]

Download link:

rapidgator_net:
https://rapidgator.net/file/105b3f7ca367969ccc5440c9552a60ed/efv0f.The.Novel.Factory.1.36.3.rar.html

nitroflare_com:
https://nitroflare.com/view/53D4016AC5D63BA/efv0f.The.Novel.Factory.1.36.3.rar

uploadgig_com:
https://uploadgig.com/file/download/53fD52E322C4e503/efv0f.The.Novel.Factory.1.36.3.rar

Links are Interchangeable - No Password - Single Extraction

[mitsumi1]

The Complete Genealogy Reporter / Builder 2018 Build 200827 Multilingual | 12.6 Mb

The Complete Genealogy Reporter uses the GEDCOM data exported from any genealogy data management program to create comprehensive genealogy reports, books, or websites. The Complete Genealogy Builder is a new genealogy data management program that provides 99.9% genealogy data standards compliance via a user interface that delivers maximum data visibility, rapid navigation capability, and layered data entry forms.

These may be configured to include fully cross-referenced narrative text, notes, sources, pictures, ancestor and descendant charts, family tree diagrams, and indexes of occupations, places, dates, anniversaries and individuals

Just export your data from the "File" menu of your genealogy data management program in GEDCOM format, specify the result as the input file for The Complete Genealogy Reporter, and you will be able to start producing a high-quality report in minutes!

Whether you are starting from scratch or seeking a better alternative to your existing genealogy data management program, there is no other known product that is more standards compliant, that provides the full range of GEDCOM-standard data fields, and that supports all international (Unicode) character sets

Includes all of the basic capabilities of "The Complete Genealogy Reporter". (Full report preference option specification and section customization is enabled only when The Complete Genealogy Reporter is separately installed and registered.)

Operating System: Windows 7, 8/8.1, 10

Home Page - [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]

Download link:

rapidgator_net:
https://rapidgator.net/file/901148e2b7a7af8b58034e8b670ca0f4/mwm4u.The.Complete.Genealogy.Reporter..Builder.2018.Build.200827.Multilingual.rar.html

nitroflare_com:
https://nitroflare.com/view/674A2D07414FFC5/mwm4u.The.Complete.Genealogy.Reporter..Builder.2018.Build.200827.Multilingual.rar

uploadgig_com:
https://uploadgig.com/file/download/c0243e8Ec3840aD0/mwm4u.The.Complete.Genealogy.Reporter..Builder.2018.Build.200827.Multilingual.rar

Links are Interchangeable - No Password - Single Extraction

[mitsumi1]

TablePlus 3.8.4 Build 138 | 121.8 Mb

Modern, native, and friendly GUI tool for relational databases: MySQL, PostgreSQL, SQLite & more.

Native, lightweight and fast
With native build, simple design and powerful features, TablePlus makes database management easier, faster & more efficient for you.

Native, fast & secured
Query, edit and manage your databases easily with a native app that can run fast like a Lambo. It takes only half a second to get up and running.

Multi tabs & code review
Quickly get a snapshot of your database with multi-tab and multi-window view, as well as stay in control of what you have changed on your database with Code Review.

Built-in SSH
You don't need to install any SSH client in order to connect to the server. SSH is a part of TablePlus.

An intuitive GUI client
Browse, query, edit your data and database structure in a simple and clean spreadsheet-like editor.

Operating System: Windows 7, 8/8.1, 10

Home Page - [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]

Download link:

rapidgator_net:
https://rapidgator.net/file/42761a89f836b65d7b2fb652e32b6bae/fdwdf.TablePlus.3.8.4.Build.138.rar.html

nitroflare_com:
https://nitroflare.com/view/89E4F997B331D2D/fdwdf.TablePlus.3.8.4.Build.138.rar

uploadgig_com:
https://uploadgig.com/file/download/1a1bA321E4Ae58a9/fdwdf.TablePlus.3.8.4.Build.138.rar

Links are Interchangeable - No Password - Single Extraction

[mitsumi1]

SysGauge Ultimate / Server 7.1.14 (x86/x64) | 22.3 Mb

SysGauge is a system and performance monitoring utility allowing one to monitor the CPU usage, memory usage, network transfer rate, operating system performance, the status and resource usage of running processes, file system performance, USB performance, disk space usage, disk read activity, disk write activity, disk read transfer rate, disk write transfer rate, disk read IOPS and disk write IOPS for individual logical disks or all physical disks installed in the computer.

SysGauge Main GUI Application
The main SysGauge GUI application allows one to configure a number of system and performance monitoring counters, display system monitoring charts, analyze the current system status, save various types of system monitoring reports and configure sound and E-Mail notifications.

SysGauge System Monitor
The 'System Monitor' GUI module allows one to perform various types of system monitoring operations using one or more pre-defined or user-custom system monitoring profiles. The system monitor provides the ability to add, edit or delete system monitoring counters, save various types of system monitoring reports, configure monitoring rules, actions and error E-Mail notifications.

Add Counter Dialog
The 'Add Counter' dialog provides the ability to add the CPU usage counters, memory usage counters, disk activity counters, network activity counters, USB activity counters, operating system status counters, file system counters and running processes counters.

SysGauge CPU Monitor
The 'CPU Monitor' GUI module is a dedicated CPU monitoring GUI module showing the total CPU usage, user CPU usage, kernel CPU usage, CPU interrupt time, CPU interrupt rate, the current CPU frequency, the C1 low-power state, C2 low-power state and C3 low-power state.

SysGauge Memory Monitor
The 'Memory Monitor' GUI module is a dedicated memory monitoring module showing the memory usage, the amount of free memory, the amount of used memory, the size of the memory cache, the cache peak size, the cache fault rate, the page file usage, the page file peak usage and the page fault rate.

SysGauge Process Monitor
The 'Process Monitor' GUI module is a dedicated process monitoring module showing the list of currently running processes and displaying for each process the process CPU usage, the memory usage, the number of threads, the number of handles, the number of process instances, the process data transfer rate, the process read transfer rate, the process write transfer rate, the process page fault rate and the amount of non-paged memory allocated by each running process.

Supported Operating Systems:
Windows XP, Vista, 7, 8, 8.1, 10 Server 2003, 2008, 2008 R2, 2012, 2012 R2, 2016, 2019

Home Page - [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]

Download link:

rapidgator_net:
https://rapidgator.net/file/1b75dbd09b0caab3e3900ac9c35580f3/vw71f.SysGauge.Ultimate..Server.7.1.14.rar.html

nitroflare_com:
https://nitroflare.com/view/A0BBE9C177F4406/vw71f.SysGauge.Ultimate..Server.7.1.14.rar

uploadgig_com:
https://uploadgig.com/file/download/5ab7B674f515ee3a/vw71f.SysGauge.Ultimate..Server.7.1.14.rar

Links are Interchangeable - No Password - Single Extraction

[mitsumi1]

SideFX Houdini FX 18.0.566 | 1.4 Gb

SideFX has released a new sneak peek for Houdini FX 18.0.566, the next update to its 3D animation and FX software withen delivers a powerful and accessible 3D experience with its procedural node-based workflow, while providing tools for simulating fluids, destruction fx, pyro fx, grains, cloth and crowds.

Houdini Main Changelogs - version 18.0.566 - Date: August 25, 2020

- Fixed a projection bug with the first rendered frame from an OpenGL ROP when rendering a LOP scene and the output resolution aspect ratio didn't match the camera aspect ratio.
- Fixed a bug with Distance-based Packed Geometry Culling when primitive shapes (sphere, tube, circle) were packed. The primitives were being incorrectly culled.
- Fixed crash that could occur when material nodes are removed from an editable subnetwork of an HDA during cooking.

SideFX has unveiled the new features in Houdini 18, the next major update to its procedural 3D animation and effects software.

The release will introduce new artist-focused modelling tools, add a new Substance integration plugin, and overhaul Houdini's key simulation toolsets, including the Vellum, FEM, Pyro and FLIP fluid solvers.

Solaris, SideFX's much-anticipated look dev and shot layout system, will also ship as part of Houdini 18.

Solaris: a complete new USD-based look dev and layout toolset.

The biggest new feature in Houdini 18 - and one to which half of the presentation at the launch event was devoted - is Solaris: a new USD-based lighting, look development and shot layout environment. The toolset is designed to enable less technically minded artists to use Houdini as a look dev and layout tool, using a non-destructive drag-and-drop workflow.

New Karma renderer set to become a replacement for Mantra in production.

Another interesting announcement from the launch event is that Karma, the new render engine developed for Solaris, is set to become a full replacement for Houdini's Mantra renderer. Although Karma was initially intended as a tool for visualising dense production scenes during look dev and layout, SideFX emphasised that it is "a full production renderer ... not just a preview renderer".

Another interesting feature shown in the presentation is the set of Hydra render delegates, which enable users to choose which render engine Solaris will use to display assets in the 3D viewport.

As well as Solaris's native Karma renderer, and the previously announced support for RenderMan, there are delegates for both Arnold and, less predictably, AMD's Radeon ProRender. Support for V-Ray, Redshift and 3Delight is also planned.

New artist-focused modelling tools, plus updates to key SOPs for procedural modelling.

The modelling tools get one of the longest changelogs, with the update continuing the trend established in recent releases of exposing Houdini's existing functionality in more artist-friendly ways. Examples include new options to slide points, edges and faces around manually when using the interactive modelling tools; and a new interactive Point Weld tool for merging vertices in geometry.

For procedural modelling, there are updates to several of Houdini's key SOP (Surface OPerator) nodes. The Bend SOP has been overhauled to make workflow more accessible, including more intuitive control handles and hotkeys for operations like snapping. The Bevel SOP - previously PolyBevel - gets support for convex bevels, plus better collision recognition.

For artists using Houdini to generate terrain, the HeightField Terrace SOP has also been updated, including the option to use a custom profile graph to control the sizes of the steps it generates.

More accurate Vellum simulations for soft bodies and cloth.

Houdini's principal simulation toolsets have also been updated, improving the realism of complex simulations, and reducing simulation times.

Vellum, the cloth/multiphysics solver introduced in Houdini 17, gets support for velocity blending. Users can control how velocity is transferred to the simulation, making it possible to tone down physically accurate, but visually distracting, secondary motion of cloth.

There is also a new sliding constraint for the solver, which enables the point of constraint to move freely across the surface of geometry: for example, enabling the constrained object to move under gravity.

SideFX also says that the resolution-independence of simulations has been improved, so low-resolution test sims should be more representative of the final high-res output. In addition, the Vellum solver is now 64-bit.

Faster fluid simulations - both for FLIP liquids and Pyro smoke and fire.

Changes to fluid simulation include support for adaptive pressure projection when using FLIP fluids. The system adjusts the size of simulation grid cells automatically, focusing computational effort on key areas, such as the liquid surface and areas of contact with rigid bodies.

In the test scenes shown, activating adaptive projection cuts simulation times by 30-40%: in the case of a fairly complex shot of a submerged craft surfacing, from 41 hours 13 minutes to 26 hours 50 minutes.

The Pyro solver, used for simulating gaseous fluids, also gets a big update. SideFX described Houdini 18's 'sparse' Pyro solver, which focuses computation on active parts of the fluid container, as "basically ... completely new", although parts of the old code base have been reused.

In the demo scenes shown, the new solver cuts both simulation times and file sizes to around a third compared to the previous implementation - although interestingly, voxel count actually rises. In addition, the entire Pyro pipeline, including post-processing, is now available in SOPs.

New art-directable fracturing tools for destruction sims.

Houdini 18 also introduces a number of improvements to the destruction toolsets.

When fracturing geometry, the chipping algorithm has been improved, generating chips more selectively in the places where they should occur, such as the sharp ends of larger fragments. There are also new options to control which fracture lines are shown when visualising fractured geometry. The entire fracturing process is now more art-directable, including the option to use custom cutter objects to break up the base geometry.

Destruction sims can also now be driven by the Bend SOP or FEM solver, resulting in some pretty crazy effects, such as the skyscraper being cleaved by a giant axe shown above. Again, the "entire destruction pipeline" is now available in SOPs

New Neo-Hookean material model preserves volume better in the FEM solver.

The FEM solver itself, often used for simulating organic tissue, gets a new Neo-Hookean material model, which should preserve volume better than the previous Corotational model. Another interesting aspect of the solver shown in the launch event was the option to set the properties of the surface independently of the main volume of the simulation.

Support for blendshapes in crowd simulations, plus improved export to other DCC software.

The update adds support for blendshape animation in crowd agents, which should make it easier to give crowd characters unique facial expressions. For pipeline integration, Houdini now supports USDSkel when exporting characters in USD format; and there are improvements when round-tripping crowd animations with other DCC tools in FBX format.

Other changes: workflow improvements, new Substance plugin and Python 3 support.

Other highlights from the Houdini 18 feature list include a "redesigned, stroke-based" Attribute Paint SOP for 3D painting objects in the viewport. Workflow improvements include the option to use hotkeys for radial menu controls, and to perform 2D pans and zooms when navigating the 3D viewport.

In addition, the update introduces "initial support" for Python 3, ahead of its introduction in next year's industry-wide VFX Reference Platform specification.

Outside the core software, there is a new Substance integration plugin, for editing procedural materials in .sbsar format. You can find full details in our original story.

The launch event also showed plugins for other third-party tools - some new, some already released - including RealityCapture, ZBrush bridge GoZ, retopology tool QuadRemesher, and UV app RizomUV.

Other useful-sounding add-ons include an Extract Silhouette SOP, a MTL file format importer for OBJ models, and a Quadrangulate SOP for converting triangular meshes to all-quad geometry.

Check out the latest additions to Houdini - including Solaris - the USD-native layout, lookdev and lighting platform. Plus learn about the other new Houdini features and enhancements in Vellum, fluids, pyro, destruction, modelling and more.

Side Effects Software. is a world leader in the development of Houdini, our advanced 3D animation and special effects software for use in film, commercials and video games. Side Effects Software has been recognized three times with Scientific and Technical awards from the Academy of Motion Picture Arts and Sciences. The Houdini family of animation software offers digital artists an unprecedented level of power, flexibility and control based on award-winning procedural technology. The comprehensive feature set includes: modeling, rigging, animation, particle effects, dynamics, compositing, integrated rendering, and more. All Houdini applications work together seamlessly and are available for the Mac OS X, Linux and Windows operating systems.

Product: SideFX Houdini FX
Version: 18.0.566
Supported Architectures: x64
Website Home Page : [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]
Language: english
System Requirements: PC *
Supported Operating Systems: *
Size: 1.4 Gb

Operating System - 64bit only - Windows 10 (64 bit)
- Windows 8.1
- Windows 8
- Windows 7 SP1 (future versions of Houdini will not be supported on Win7)
- Windows Server (any version) is NOT supported
Memory- 4 GB required
- 8 GB or higher and 64GB strongly recommended for fluid simulations
Processor
- Intel or AMD x64 CPU with SSE 4.2 required. Houdini 17.0 will not run on a system with an instruction set lower than SSE 4.2.
Disk Space
- 2GB required for installation
Input Devices
- 3 Button mouse required
- Scroll wheel used where present
- Wacom tablet recommended for Houdini's brush-based tools
Graphics Cards
A GL4.0 compliant graphics card is required. GL3.3 cards will have missing features and lower GL versions will not run Houdini 17 at all.
4GB VRAM or more is required. Less than this can result in display errors such as blank windows. High DPI displays (4K, 5K) or multiple monitors require a minimum of 4GB.
Graphics card must support OpenCL version 1.2.
The OptiX Denoiser requires a Kepler or later Nvidia GPU (K, P, M, V prefixes).
It is VERY important that you install the latest driver for your graphics card. Failing to do so may result in display issues and/or slow performance:
Windows
- NVidia GeForce GPUs: 390.77 or higher (don't use 376.xx - you'll have slow performance and crashes)
- NVidia Quadro GPUs: 390.77 or higher
- AMD: 19.Q1 or higher
- Intel 10.18.10.3958 or higher.

Download link:

rapidgator_net:
https://rapidgator.net/file/9dd56bfda5fcab638a6602a88131f4f3/5on51.SideFX.Houdini.FX.18.0.566.part1.rar.html
https://rapidgator.net/file/18cfedffc31a0250734126856f8e70e0/5on51.SideFX.Houdini.FX.18.0.566.part2.rar.html
https://rapidgator.net/file/1e7c45f235d46d0d74d87348b4bd20e2/5on51.SideFX.Houdini.FX.18.0.566.part3.rar.html
https://rapidgator.net/file/31a545b07ef26d95e975f1957088bee6/5on51.SideFX.Houdini.FX.18.0.566.part4.rar.html
https://rapidgator.net/file/015c1ece225c1fa78627b65470f05a8f/5on51.SideFX.Houdini.FX.18.0.566.part5.rar.html

nitroflare_com:
https://nitroflare.com/view/60E2915A72DF2FA/5on51.SideFX.Houdini.FX.18.0.566.part1.rar
https://nitroflare.com/view/BCEE32653542BC4/5on51.SideFX.Houdini.FX.18.0.566.part2.rar
https://nitroflare.com/view/9629286EF669701/5on51.SideFX.Houdini.FX.18.0.566.part3.rar
https://nitroflare.com/view/F24A245D44103C0/5on51.SideFX.Houdini.FX.18.0.566.part4.rar
https://nitroflare.com/view/E95716B6F90F149/5on51.SideFX.Houdini.FX.18.0.566.part5.rar

uploadgig_com:
https://uploadgig.com/file/download/00bE7c8b5eA5a282/5on51.SideFX.Houdini.FX.18.0.566.part1.rar
https://uploadgig.com/file/download/d828d0ADcede789a/5on51.SideFX.Houdini.FX.18.0.566.part2.rar
https://uploadgig.com/file/download/3a5cfA5B00142A5d/5on51.SideFX.Houdini.FX.18.0.566.part3.rar
https://uploadgig.com/file/download/b96dc338f1f3Fe0A/5on51.SideFX.Houdini.FX.18.0.566.part4.rar
https://uploadgig.com/file/download/D4504826a727fceF/5on51.SideFX.Houdini.FX.18.0.566.part5.rar

Links are Interchangeable - No Password - Single Extraction

[mitsumi1]

Seasonality Core 2.7.1 | macOS | 9 mb

Seasonality Core is the complete weather center for your Mac. View weather at any of the 34,000 built-in locations in more than 200 countries, or add your own custom weather location to view even more precise data. Seasonality gives you an accurate 7 day forecast, graphs of past weather conditions, a custom satellite/radar image, and much more.

Seasonality Core's graphs are excellent at showing how weather conditions are changing over days, months, or even years. Seasonality Core will automatically collect and store weather data indefinitely. The custom satellite/radar image gives users the option to adjust opacity of both overlays, show the latest North American surface analysis, and view the global wind flow with Particle Mode.
Seasonality Core has a solid foundation from being in development for almost 10 years. We always welcome feedback, and have made countless improvements to the software over the years based on user suggestions. If Seasonality Core is missing something, we want to hear about it! Send your feedback to our support email.

What we're working on:
- Higher resolution radar within the US
- Improved radar coverage outside the US
- Supporting personal weather stations
- Weather watches and warnings
- An even more flexible interface

Compatibility: OS X 10.8 or later 64-bit
Homepage: [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]

Download link:

rapidgator_net:
https://rapidgator.net/file/d30faa06387f950b9f9cde164a3b429b/3fueg.Seasonality.Core.2.7.1.rar.html

nitroflare_com:
https://nitroflare.com/view/6E8A55027DDA0AC/3fueg.Seasonality.Core.2.7.1.rar

uploadgig_com:
https://uploadgig.com/file/download/b77943cD2BcaA2d2/3fueg.Seasonality.Core.2.7.1.rar

Links are Interchangeable - No Password - Single Extraction

[mitsumi1]

PVS-Studio 7.09.41189 | 113 Mb

PVS-Studio performs static code analysis and generates a report that helps a programmer find and fix bugs. PVS-Studio performs a wide range of code checks, it is also useful to search for misprints and Copy-Paste errors. Examples of such errors: V501, V517, V522, V523, V3001.

The main value of static analysis is in its regular use, so that errors are identified and fixed at the earliest stages. There is no point in wasting 50 hours looking for a bug that could be found with static analysis. So, let's point out that again - the main idea of static analysis is not to find one hidden bug on the day before the release, but to fix dozens of bugs day by day.

The analyzer can be run at night on the server and warn about suspicious code fragments. Ideally, these errors can be detected and fixed before getting into the repository. PVS-Studio can automatically be launched immediately after the compiler for the files that have been just modified.

PVS-Studio can integrate into Visual Studio development environment 2010-2017. If you use this IDE, then most likely you will just have to go to the menu of PVS-Studio plugin and choose "Check Current Project".

Main features of PVS-Studio
Simple and seamless integration with Visual Studio 2010-2017
Automatic analysis of individual files after their recompilation
Online reference guide concerning all the diagnostics available in the program, on the web site and documentation (presented as a .pdf file) Up to 550 pages of documentation
Saving and loading analysis results allow doing overnight checks - during the night the analyzer does the scanning and provides you with the results in the morning.
You can save analysis results as HTML with full source code navigation.
Project analysis run from the command line: helps integrate PVS-Studio into overnight builds; a new log will be issued in the morning.
Great scalability Support of multi-core and multi-processor systems with the possibility to specify the number of the cores to use; IncrediBuild support.
Interactive filtering of the analysis results (the log file) in the PVS-Studio window: by the diagnostic number, file name, the keyword in the text of the diagnostic.
Automatic check of PVS-Studio updates (during the work in IDE and overnight builds).
BlameNotifier utility. The tool allows you to send e-mail notifications to the developers about bugs that PVS-Studio found during a night run.

Supported languages and compilers
Windows. Visual Studio 2010-2017 C, C++, C++/CLI, C++/CX (WinRT), C#
Windows IAR Embedded Workbench, C/C++ Compiler for ARM C, C++
Windows Keil µVision, DS-MDK, ARM Compiler 5/6 C, C++
Windows Texas Instruments Code Composer Studio, ARM Code Generation Tools C, C++
Windows GNU Arm Embedded Toolchain, Arm Embedded GCC compiler, C, C++
Windows Clang C, C++
Windows MinGW C, C++
Windows Java

Home Page - [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]

Download link:

rapidgator_net:
https://rapidgator.net/file/9a1c60730296e14f736898093ef9ceb4/8xs6r.PVSStudio.7.09.41189.rar.html

nitroflare_com:
https://nitroflare.com/view/57F5541C0480EEF/8xs6r.PVSStudio.7.09.41189.rar

uploadgig_com:
https://uploadgig.com/file/download/f0be14a976a14Af2/8xs6r.PVSStudio.7.09.41189.rar

Links are Interchangeable - No Password - Single Extraction

[mitsumi1]

PhotosRevive 1.2.1 | macOS | 142 mb

PhotosRevive automatically colorizes your old black and white photos. The application uses a revolutionary artificial intelligence that will add colors in an ultra-realistic way. The application is super simple to use. Scan or import your photo and that's it. The application will color it without any effort on your part.

We know that the colors chosen by the engine may differ from those of your memories. That's why the app lets you add indications of colors. So you can help the artificial intelligence ​​and change the rendering as you please. PhotosRevive is the first app that will perfectly adjust the rendering to your memories.

FEATURES:
- Automatically recolor photos.
- Scan photos from your camera.
- Adjust black and white tint.
- Add indications to improve rendering.
- Save and share the result.

Compatibility: macOS 10.13 or later 64bit
Homepage: [Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]

Download link:

rapidgator_net:
https://rapidgator.net/file/b06e312d5e8d8969fff5a63e68e9e925/p64fj.PhotosRevive.1.2.1.rar.html

nitroflare_com:
https://nitroflare.com/view/6AE648FB20101F6/p64fj.PhotosRevive.1.2.1.rar

uploadgig_com:
https://uploadgig.com/file/download/d6794a38C2fF8e71/p64fj.PhotosRevive.1.2.1.rar

Links are Interchangeable - No Password - Single Extraction

[mitsumi1]

PatterNodes 2.3.3 | macOS | 23 mb

PatterNodes is a tool for creating graphical patterns, animations, gradients, or illustrations based on repetitions. This is done by defining a sequence of steps, a recipe of sorts, that describes the pattern. Each pattern element or operation is represented by a little panel called a node, and the nodes are then linked by connections drawn between them.

The resulting pattern tile is always shown in the bottom preview view, repeated and updating in real time with any changes, giving you instant feedback of what the end result will be. To make pattern creation easier PatterNodes also includes a lot of nodes that automatically perform common tedious tasks like repeating elements at the tile edges to make the pattern seamless, or randomizing different aspects (like color, position, rotation, etc.) of the elements in a pattern to give it a little more life. Finally, when you're done you can simply copy the pattern tile into whatever illustration or graphics application you use, or export it either as vector graphics or a bitmap image file. Animations can be exported as GIF, QuickTime MOV or numbered PNG or JPG files

Compatibility: OS X 10.11 or later 64-bit

Download link:

rapidgator_net:
https://rapidgator.net/file/0e486da1dd961796ef3035a70e1d85bd/chsgn.PatterNodes.2.3.3.rar.html

nitroflare_com:
https://nitroflare.com/view/494D69F5164F410/chsgn.PatterNodes.2.3.3.rar

uploadgig_com:
https://uploadgig.com/file/download/9Bde952b86F1814b/chsgn.PatterNodes.2.3.3.rar

Links are Interchangeable - No Password - Single Extraction