Dl4ever Software

[Dl43v3r]

File Size: 10.5 MB | Multilingual

PIDKey Lite The program is intended to show the renovation and conservation in the database of key information products to M $.It allows you to replace PIDKey by Ratiborus and VAMT. Program PIDKey LiteIt is the successor of PIDKey. and I took out of it the best program ideas (Allowing you to add new keys to the two modes of adding key modes).

Program Usage:
Run PIDKey.exe, select the desired configuration, insert the key into the input field then click GO!. Identifying the key configuration will be checked against all configurations starting at the beginning of the list until correct data is retrieved.
The program has several built-in configurations, but also you can create your custom configuration. If you put your config file in the program folder, the file will be saved in a relative path and the program can work with it from any location folder with the program.
When you select a custom configuration a button becomes available to remove it.
You can check the key from a file. You can use any file in text format containing a key mixed with any number of other keys so they will be correctly extracted.

Whats New:
Old version does not define all keys. The fact is that there should be as few configs in the program as possible, this affects the speed of the program. So, adding a new config, I deleted the old one if possible so that they would not duplicate each other, slowing down the program. And at some point it turned out that some old keys ceased to be detected ... In short, everything as usual happens, the improvements often bring deterioration, which at once seems to be not noticeable ...

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/CBA258BD1D4F7B4/Dl4ever_PIDKey_Lite_v1.64.4.rar

RapidGator

https://rapidgator.net/file/1fe3a7f6034e0eb6626ff7801b182cc2/Dl4ever_PIDKey_Lite_v1.64.4.rar.html

[Dl43v3r]

Altair PollEx 6.1.0 | 425.2 mb

The Altair product team is pleased to announce the availability of PollEx 6.1.0, is the most comprehensive and integrated set of PCB design viewing, analysis and verification tools in the market for electrical, electronics and manufacturing engineers.


Highlights of the 6.1 Release

Product Unit Draw Change
- PollEx UPE requires 30 HWUs from PollEx 6.1 release which required 50 HWUs in previous releases.
Adding New Product License Feature
- PollEx post-processor of verification toolsets (DFM, DFE and DFA) is added with the feature code PollExPostVerificationfrom PollEx 6.1 release.This feature takes 21HWUs to run the Result of DFM, DFE and DFA. This feature is used to check only verification results. Pre-processor(Input) or CoreRunning consumes 50 HWUs on the verification.
Adding 3D Net Data Export Feature
- PollEx Real PCB Assembly Viewer is added export feature of the 3D Net data such as STEP, STL and IDF. Real PCB Assembly Viewer is in the Option menu of PollEx PCB.

Pollex 6.1.0 - Release notes:

This file ([Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]) lists all the new and updated features and also bug fixes that are available in this release.

Altair PollEx is an open solution, which transfers data flawlessly between different ECAD and simulation environments. While PCB design tools are traditionally reserved for PCB design engineers, engineers from other disciplines like hardware design, manufacturing, testing and mechanical need to also access, review and analyze the design and manufacturing data of PCBs and their Integrated Circuit (IC) packages.

PollEx provides unsurpassed connectivity to all relevant ECAD systems and formats as well to third party PCB simulation software and brings Design for Excellence (DfX) through a common application and a powerful set of rule-based design checks addressing post-design process constraints in the early design stages.

Its many features include query, measure, finding objects, and various reporting. PollEx operates in an open environment, which can transfer data flawlessly between different ECAD and simulation environments.

Introduction for PollEx PCB - layout design viewer and basic module for other option modules.


Altair is a global technology company that provides software and cloud solutions in the areas of product development, high performance computing (HPC) and data analytics. Altair enables organizations across broad industry segments to compete more effectively in a connected world while creating a more sustainable future.

In this video, Jim Scapa and Sun Hewh Huh discuss Altair's acquisition of Polliwog Co. Ltd., a high-tech software company based near Seoul, providing EDA software to the rapidly growing electronics industry.


Altair announced the acquisition of Polliwog Co. Ltd., a high-tech software company based near Seoul, providing EDA software to the rapidly growing electronics industry. Throughout the last several years Altair has expanded from its foundation of mechanical simulation software into areas of systems simulation and electromagnetics. Polliwog 's PCB solvers and verification tools extend these capabilities further.

Product: Altair PollEx
Version: 6.1.0
Supported Architectures: x64
Website Home Page :

http://www.altair.com

Language: english
System Requirements: PC
Supported Operating Systems: Windows 7even or above
Size: 425.2 mb

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/CD6FB0C9DA81221/Dl4ever_PollEx.6.1.0.rar

RapidGator

https://rapidgator.net/file/3409b20bcdd06aced08beb88f2262ac3/Dl4ever_PollEx.6.1.0.rar.html

[Dl43v3r]

BETA-CAE Systems 19.1.6 | 1.9 Gb

BETA CAE Systems announces the release of the ANSA/EPILYSIS/META 19.1.6 series. Apart from fixes for detected issues, this version also hosts noteworthy enhancements and implementations.


The most important enhancements and fixes are listed below:

Enhancements and known issues resolved in BETA Suite

Communication with License Manager
- ANSA/META would fail to cycle through all the available License Servers, when trying to re-acquire License credits.
- On top of that, as far as the Idle User Timeout is concerned, ANSA would fail to turn in Idle Status, while remaining in Launcher window mode.
TAITherm
- The v12.7 TDFIO TAITherm Libraries are now supported in ANSA/META.

Enhancements and known issues resolved in ANSA

Enhancements in ANSA

Volume Mesh - Structured Mesh
- Splitting of Hexa Layers at areas of collapsing or warping violations has been enhanced, leading to overall better quality Layers.

Known issues resolved in ANSA

CAD to ANSA Translators

- CAD to ANSA translation might fail, when the dm_structure.xml had a Read Only Attribute.
Database Browser
- Unexpected termination would occur, when trying to view the list contents of a Database Browser entity, for which more than 30 attributes were marked as active list columns in the ANSA GUI settings (ANSA.xml).
Connections & Assembly
- Nodes of Frozen Shells would be erroneously moved upon realization of neighboring Connections, when the option 'Mesh Parameters > Fix Quality > Create perfect 2D hole zone' was activated.
Shell Mesh
- The script function mesh.ProjectShellsOnShells() would erroneously distort the target elements, in case solid elements were attached to target shells.

Enhancements and known issues resolved in META

LS-DYNA
- LS-DYNA SPC resultant Forces are now supported as SET_SPC Force in 2D Plot.

Known issues resolved in META

Read Results
- Unexpected termination could occur if the deformation scale factor was changed during reading results. Changing the scale factor during reading results has no effect, now, in the deformation scale.
- Focusing on Radioss, excessive memory usage was noticed, while loading curves for entities from different Time Histories.
Report & Report Composer PPTX
- Unexpected termination could occur when a report was deleted through GUI. This happened only when an Excel table was edited through the Dialog.
User Toolbars
- The command "toolbar edit onlyset" did not work as expected, unless the toolbar would open manually

BETA CAE Systems transformed CAE by introducing revolutionary automation software tools and practices into Simulation and Analysis processes almost 30 years ago.

Committed to our mission to enable engineers to deliver results of high value, we continue to offer state-of-the-art, high-performance software and best-in-class services. Our simulation solutions liberate low risk and high Return-On-Investment innovation.

The ground breaking technology, the excellent services and our high standards of business ethics are the three pillars on which BETA was founded and grows since then.

Our passion for engineering, our drive for excellence, and our loyalty to customers and partners, are the key ingredients of our success. We first established our reputation in the Automotive sector and now we are proud of the deployment of our software also in the Aerospace, Defense, Biomechanics, Electronics, Energy and other Industries. Our solutions exceed their requirements in all the simulation disciplines, and allow them to develop the right product, for the right market, at the right time.

- ANSA is an advanced multidisciplinary CAE pre-processing tool that provides all the necessary functionality for full-model build up, from CAD data to ready-to-run solver input file, in a single integrated environment.
- META is a thriving multi-purpose post-processor meeting diverging needs from various CAE disciplines.It owes its success to its impressive performance, innovative features and capabilities of interaction between animations, plots, videos, reports and other objects.
- CAD to ANSA Translators . Porting product data and meta-data from diverse CAD systems to CAE pre-processing is a challenging task that requires advanced and configurable tools. The CAD data to ANSA translators meet the industries requirements by offering a wide portfolio of supported CAD formats, settings and options. Offered with ANSA or as add-on to it, the translators, allow the trouble-free kick off of the CAE processing.
- EPILYSIS serves as a contemporary solution in the field of Finite Element Analysis, embodying the accumulated knowledge from 30 years of collaboration with the CAE community. It covers numerous solution types and intends to bridge the gap between pre- and post- processing for disciplines such as Structural, NVH, Optimization, and more.

This video demonstrates META post-processor's capabilities for handling Composite results through a user friendly toolbar.


BETA CAE Systems is a private engineering software company committed to the development of state of the art CAE software systems that meet the requirements of all simulation disciplines. The company's products, the ANSA pre-processor/ EPILYSIS solver and META post-processor suite, and SPDRM, the simulation-process-data-and-resources manager, hold a worldwide leading position across a range of industries, including the automotive, railway vehicles, aerospace, motorsports, chemical processes engineering, energy, electronics, heavy machinery, power tools, and biomechanics.

Product: BETA CAE Systems
Version: 19.1.6
Supported Architectures: x64
Website Home Page :

http://www.beta-cae.com

Language: english
System Requirements: PC *
Supported Operating Systems: *
Size: 1.9 Gb

Recommended system requirements
CPU: 4-core/8-thread intel i7 CPU (e.g. i7 960)
Memory: 16GB
HDD: 1TB
Network: 1Gbit, StaticIP
Recommended GPU (OpenCL Support) requirementsAMD
Radeon HD 7xxx, 6xxx (with at least 1GB of video memory size)
Firepro W series, V series(with at least 1GB of video memory size)
NVIDIA
Tesla (all)(with at least 1GB of video memory size)
Quadro (with at least 1GB of video memory size)
Intel *
i3, i5, i7
* Intel Platform is also supported, with the prerequisite that Intel SDK for OpenCL Applications 2012-13 is already installed.
Minimum system requirements for CAD to ANSA translators
Windows 7
Microsoft Visual C++ 2005 Redistributable Package
Microsoft Visual C++ 2008 Redistributable Package
Microsoft Visual C++ 2010Redistributable Package

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/8FBA1373F534605/Dl4ever_CAE.Systems.V19.1.6.part1.rar
https://nitroflare.com/view/7616515F6F8144F/Dl4ever_CAE.Systems.V19.1.6.part2.rar

RapidGator

https://rapidgator.net/file/5d31fc57881d70df2da882a5e3f9fabc/Dl4ever_CAE.Systems.V19.1.6.part1.rar.html
https://rapidgator.net/file/4db57d9c86907d5d8c54202f79ab46e4/Dl4ever_CAE.Systems.V19.1.6.part2.rar.html

[Dl43v3r]

Machinery HDR Effects 3.0.81 (x64) | 61 Mb

MACHINERY HDR is a photo editor that utilizes this technology. You do not need to be an expert to achieve dazzling effects - even from a single image saved in JPG format! MACHINERY is easy to use thanks to an intuitive interface and the available set of options. Predefined settings allow the user to achieve professional HDR effects with just a single click of the mouse!

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/5FCBBDA2B2B4340/Dl4ever_HDR_Effects_3.0.81.rar

RapidGator

https://rapidgator.net/file/2af5a23e3ccc844ba90952ab920fddba/Dl4ever_HDR_Effects_3.0.81.rar.html

[Dl43v3r]

eM Client Pro 7.2.38715.0 Multilingual | 73.1 Mb

Best email client for Windows. eM Client is a full-featured email client with a modern and easy-to-use interface. eM Client also offers calendar, tasks, contacts and chat.


Support for Gmail, Exchange and others
eM Client supports all major services including Gmail, Exchange, iCloud, and Outlook.com. You can find more information in the Server section of our web.

Super simple import and setup
eM Client is able to set up everything automatically for most of the services. It also efficiently imports your data from all major email clients. This includes Microsoft Outlook, Outlook Express, Windows Mail, Thunderbird and more.

Make eM Client your own
eM Client lets you customize its appearance and behavior on multiple levels. It supports several fully customizable themes including a Dark theme and allows you to customize its behavior in the most comprehensive way on the market.

Unique Sidebar
eM Client sidebar brings you quick contextual information that will boost your productivity even more. The sidebar communication history, attachment history and agenda will save you a lot of time.

Superfast Search
Quickly finding what you are looking for makes you more productive. eM Client excels in this area with its super fast and customizable search capabilities.

Touch Support
With its complete touch support and optimized appearance, eM Client fully supports modern devices such as tablets and hybrid devices.

Localization
eM Client is currently localized to these languages: English, Czech, Danish, Dutch, German, Greek, Spanish, French, Hungarian, Italian, Korean, Japanese, Norwegian, Polish, Portuguese, Russian, Slovak, Swedish, Turkish and Chinese.

Backup tool
eM Client relies on its own backup tool that can automatically back up your data even when the application is running.

New Features in eM Client 7.1:

PGP Encryption Support
eM Client now supports PGP - create or import your PGP keys to send encrypted and signed emails.

Live Backup
You no longer have to exit eM Client in order for the backup to proceed. eM Client will now back up while running so you can simply keep working even while it is underway.

Auto Avatar downloading
eM Client 7.1 automatically downloads and displays avatars for your contacts from the web. We download from Gravatar, domain icons and more.

Improved table editor
Editing tables just became a whole lot easier - you can resize any cell, row or column that you want.

Autoresize and basic editing images
Pasting images into emails is now simpler than ever. Not only will they be automatically resized to fit, you will also be able to manually change the size, as well as rotate and flip them.

Auto-replies for Gmail
Automatic 'Out of Office' replies for Gmail are now at your disposal. Let everyone know that you will not be able to respond to their emails by configuring the automatic response right inside eM Client.

Operating System:
Windows® 10, Windows® 8 / 8.1, Windows® 7

Homepage -

http://www.emclient.com/

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/D1D63AB84CD10FE/Dl4ever_eM.Client.7.2.38715.0.rar

RapidGator

https://rapidgator.net/file/57b093930a37b15962a01379dd365a67/Dl4ever_eM.Client.7.2.38715.0.rar.html

[Dl43v3r]

Windows x64 | Language:English | File Size: 3.75 GB | Preactivated

Windows 7 Ultimate is the most versatile and powerful edition of Windows 7. It combines remarkable ease-of-use with the entertainment features of Home Premium and the business capabilities of Professional, including the ability to run many Windows XP productivity programs in Windows XP Mode. For added security, you can encrypt your data with BitLocker and BitLocker To Go. And for extra flexibility, you can work in any of 35 languages. Get it all with Windows 7 Ultimate.

Features:
-64-bit versions Combines remarkable ease-of-use with the entertainment features of Home Premium and the business capabilities of Professional--get it all with with Windows 7 Ultimate
-Make the things you do every day easier with improved desktop navigation; start programs faster and more easily, and quickly find the documents you use most often
-Run many Windows XP productivity programs in Windows XP Mode; watch, pause, rewind, and record TV on your PC
-Easily create a home network and connect your PCs to a printer with HomeGroup; connect to company networks easily and more securely with Domain Join
-Recover your data easily with automatic backup to your home and business network; help protect data on your PC and portable storage devices against loss or theft with BitLocker.

Microsoft Office 2019:
Office 365 ProPlus, the cloud-connected version of Office, delivers the most productive and most secure Office experience-with the lowest total cost of ownership for deployment and management. However, for customers who aren't ready for the cloud, Office 2019 provides new features and updates to the on-premises apps for both users and IT professionals. Like Windows Long Term Servicing Channel (LTSC) releases, Office 2019 provides a set of valuable enhancements for customers who can't be cloud-connected or receive regular updates.

The new enhancements in Office 2019 are a subset of a long list of features that have been added to Office 365 ProPlus over the last three years. Office 2019 is a one-time release and won't receive future feature updates. However, we'll continue to add new features to Office 365 ProPlus monthly, including innovations in collaboration, artificial intelligence (AI), security, and more.

Microsoft Office 2019 Pro Products Include:
Microsoft Office 2019 Professional Plus
Microsoft Access 2019
Microsoft Excel 2019
Microsoft Lync 2019
Microsoft OneNote 2016
Microsoft Outlook 2019
Microsoft PowerPoint 2019
Microsoft Publisher 2019
Microsoft Word 2019
Skype for business 2019
Office Shared Features
Office Tools

Whats New:
- Integrated updates on March 10, 2020 (including MSRT);
- Integrated SmartFix 2.2.5, Microsoft DaRT in winre.wim and boot.wim;
- Systems were in audit mode (update integration - KB4528069 [to support ESU updates] ).

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/5A5723B658699D4/Dl4ever_W7.Of19.March.2020.part1.rar
https://nitroflare.com/view/0BC4010534B369B/Dl4ever_W7.Of19.March.2020.part2.rar
https://nitroflare.com/view/21B51F349D4C634/Dl4ever_W7.Of19.March.2020.part3.rar
https://nitroflare.com/view/3BCFE5176E7424A/Dl4ever_W7.Of19.March.2020.part4.rar

RapidGator

https://rapidgator.net/file/7a455b8c326cb1a7ef3ff2b01c661707/Dl4ever_W7.Of19.March.2020.part1.rar.html
https://rapidgator.net/file/83d447e99ae827fff5621b83e599c292/Dl4ever_W7.Of19.March.2020.part2.rar.html
https://rapidgator.net/file/bcac751ea3c085237cfd63147e1e924f/Dl4ever_W7.Of19.March.2020.part3.rar.html
https://rapidgator.net/file/15c3f29a0e945e6d3e0e4d88c3f643a1/Dl4ever_W7.Of19.March.2020.part4.rar.html

[Dl43v3r]

DICAD Strakon Premium 2020.3.2 | 1.1 Gb

Languages: English, Français, Deutsch, Polski

The DICAD Systeme product team is pleased to announce the availability of Strakon Premium 2020 patch 3. Last release extends its functional range in important areas around structural design.

Sustainable software becomes better, more valuable and more comprehensive with each new version. The new version 2020 also expands STRAKON's range of services with additional functions - for example in architectural, engineering, precast element planning, reinforcement, cooperative BIM or 3D bridge planning. The new functions ensure more efficient process flows in companies and make planners fit for future tasks and challenges in the coming decade.

New 3D bridge construction concept

With the new bridge construction concept, the new version STRAKON 2020 perfects its extensive tool range with which even complex bridge superstructure projects can be easily created and flexibly modified. The route and gradient data required for the design can be imported or entered manually. Station planes can be defined along the 3D route generated from this data, on the basis of which standard cross-sections can be individually adapted. The bridge can thus be integrated into a digital terrain model. This allows even complex bridge superstructures to be conveniently designed in three dimensions.


If the route data is changed, the entire superstructure automatically adapts to the new route. The complete bridge substructure, such as piers or abutments, can also be easily integrated into this concept.

Work efficiently with 3D templates

STRAKON 2020 also offers clever solutions for the creation of identical or similar 3D components. For example, individual 3D objects with built-in parts and cube reinforcements can be saved in the library as flex parts. The flex part can then be integrated into a project and adapted to the current geometry requirements. For example, a pump sump consisting of various 3D objects and a cube reinforcement can be saved in the library. It can be individually adapted in its geometry during installation.

The advantage: Complex identical or similar objects do not have to be modelled several times and any existing cube reinforcements automatically adapt to the new geometry. If Flex components stored in the library are not broken down into individual objects during insertion, all inserted copies including cube reinforcement change automatically as soon as an inserted Flex component is changed.


Easier from 2D to 3D

A simpler modelling of storey buildings and better support in switching from 2D to 3D is made possible by the new "Planar Concept", which has been integrated into the orientation and control tool in STRAKON-Cube. Here, floor plans are entered planarly in the top view, which simplifies the 3D design process. Similar to 2D planning, the user works on a height level and can enter and edit objects in three dimensions. In particular, changing wall widths, heights and lengths in the plan view is made more convenient by new editing handles.

The new objects "Beam" and "Column" can be modified in a similarly intuitive way. In order for the user to know at which height level he is currently located, the heights of the structural levels are continuously displayed.

The cube wall has also been functionally expanded: wall heights can now be defined globally or locally using height nodes. Wall openings can now be defined at reference points with an improved input concept. A further function allows walls to be divided and the wall thickness of a partial wall to be changed. Also the new "SmartClick" in STRAKON-Cube allows faster working at different places, such as calling functions while taking over the parameters of the approached object or the elegant possibility to connect walls or lines, shorten them and generate intersections.

Faster from 3D model to 3D plan

STRAKON 2020 automatically generates correct 3D plans from the 3D model and relieves users of the time-consuming 2D drawing work. Default settings of the program ensure that floor plans, views and sections are displayed correctly. The engineer view function displays ceiling views in a manner suitable for engineers. Surfaces of rising components such as walls or columns are automatically marked with colour or standard hatching according to the settings, which increases plan readability. Openings and recesses are automatically marked with a cross or diagonal symbol in the 3D view. Objects and components can be labeled automatically in the plan. Surface properties of components are also displayed automatically, for example to mark the filling side of precast parts in the plan with a symbol.

Efficient cube reinforcement directly in the model

The so-called "cube reinforcement" has also been extended. In addition to the 3D reinforcement, it allows direct reinforcement input in the 3D model, automatically displays the reinforcement in 3D reinforcement views and positions it in the plan. In addition to a polygonal laying of bar steel, various standard bending shapes can be selected automatically for direct laying. The cube reinforcement automatically detects other existing reinforcement if required and adjusts the edge distance accordingly. A flat laying of steel bars is possible as well as free bending forms without the connection to formwork edges. With the new cube mats, laying fields can be defined and these can be laid out with reinforcement mats directly in the 3D model, taking into account previously made settings.

Comfortable working together

In order to work on a 3D project with several employees at the same time, models for the respective floors or construction stages to be worked on were previously created in different plans. Using so-called model references, each employee was able to see the overall model and use it in the team.

With the new STRAKON 2020 function "Project Model" the 3D model is generated within the work or project area, independent of the plan. This allows several employees not only to work on the overall model simultaneously, but also to edit the overall model across several sub-models, if they have the respective authorizations. As soon as an employee is active on a partial model, it is visible to others, but locked for editing. Once all employees have released the editing of their submodels, the entire model can be edited again, even across floors.

Integration in BIM and VR, ERP and PPS

More and more often, projects are realized using the BIM planning method. For this purpose, 3D models including component data must be exchanged between the project participants via the IFC data format. STRAKON 2020 supports the IFC 2x3 and IFC 4.0 standard. The 3D reinforcement contained in the model is exchanged as "real" reinforcement with all properties such as diameter, position number, etc. as well as object geometries of 3D objects, flex components or built-in parts.

STRAKON 2020 now shows whether all objects were imported correctly during IFC import by means of a check log. If the IFC file is transferred to a VR presentation system, projects can also be viewed through VR glasses, including the material colors defined in STRAKON. STRAKON model data can also be exchanged with ERP, PPS and AVA systems, including all geometry, production and calculation data. To minimize data sizes, geometry data can be filtered out if required.

For STRAKON precast projects planned in connection with an ERP/PPS system, a new data synchronization enables a bidirectional data exchange. Thus, 3D/BIM data can not only be transferred to the ERP system, but can also be synchronized from the ERP system to CAD. This data can then be used in STRAKON for visualizations or list evaluations.

Parameterized 3D built-in parts

3D built-in parts can be positioned even more flexibly in STRAKON 2020 - either as a default, as the next free position or as a fixed project position number. Sub-items for 3D built-in parts can also be assigned. With the new parametric built-in parts, several copies, for example with different lengths, can be installed with one 3D built-in part. These lengths are then listed in the respective subitem in the installation parts list or added up as running meters. Reinforcements that belong to an installation part can now be saved as cube reinforcement in the 3D installation part. If a fixture is then installed in the model, the reinforcement is also automatically transferred to the steel list.

New architecture functions for structural engineers

Due to a growing demand, STRAKON continues to expand its range of functions in the direction of architecture for structural engineers. This area is becoming more and more important for DICAD customers - besides the fields of building construction, civil engineering, bridge construction, civil engineering and prefabricated construction - whose main business is structural design. For this purpose STRAKON 2020 has been extended by various functions, such as rooms: Both their types of use are now taken into account as well as wall and floor structures. Room data such as perimeter, area, room volume etc. can be supplemented with individual properties and automatically evaluated in a room list.

The automatic evaluation has also been extended for wall areas or object lists, which are automatically sorted according to the project structure per floor. A Flex parts list structured according to part types shows immediately how many similar parts are contained in the project, which simplifies the work of precast planners.

The project presentation has also been expanded: 3D projects can now be vividly presented including a realistic shadow representation in the form of perspectives or virtual tours.

Revised themes for Patch 3 - What's new:

- The correct Flex-Part is used again in the shop drawing from the library.
- CPI XML: Data of the 3D embedded parts are simply written to the file and the properties are also transferred.
- 3D embedded parts: When moving an insert as a displacement object, the area is calculated correctly.
- For plans with rotation angle the reinforcement lists are printed correctly again.
- Labels of wall openings keep their position after updating the view. Note: The position must be corrected again.
- Cube: Embedded part profiles can also be inserted externally into the project.
- Flex-Parts are displayed in 3D views again.
- Cube: Intersections between lines/arcs can be captured again.
- The billable embedded parts list is printed again in PDF files.
- Meshes: With Modify section > Global the correct dialog opens again.
- Meshes: The number for counted mesh representation is saved correctly again.
- Meshes: Correct writing of the individual mesh for the global cutout correction.
- Embedded part profiles: All user-defined text variables are transferred into the description text of the embedded part list.
- Embedded parts: A permanent position comparison for variables with other units than the standard unit "cm" has been eliminated.
- Item drawing: Correct display of the clamping direction arrow when correcting the position number or symbol.
- Cube: The building structure is adopted when importing IFC references.
- 3D embedded parts: The position number of a 3D embedded part is correctly adopted when installing it into a Flex-Part.
- Rebars: Crash when creating a bar representation for certain iron shapes removed.
- Incorrect display in 3D views fixed.
- Interfaces: Take over drawing texts are expanded correctly.
- Cube: Reinforcement connected to hidden 3D view edges is displayed correctly in the Cube again.
- Meshes: If the pen for the dimension text is changed to NPLO, the entire count view is displayed in NPLO.


STRAKON is a 2D/3D/BIM CAD system for structural design. The focus is on formwork and reinforcement planning. You can create 2D or 3D plans. You can edit the project in BIM (Building Information Modeling) or only in 3D or 2D. The designer or project manager can decide within a project which method is required or useful. As changes during the phase of planning and construction are very common, a high degree of modification comfort is very important. Furthermore, cooperation with many project participants via fast electronic data transfer is absolutely essential. STRAKON allows you to communicate digitally with all project partners such as contractors, architectsa, structural engineers, MEP-planners, construction companies, etc. BIM in particular requires good interfaces in structural design, where formwork and reinforcement plans play a central role. Here IFC, CPIXML or 3D PDF offer a very good standard.

The creation of a 3D building model with the BIM technology "STRAKON-Cube" also creates new possibilities in building construction. Fast 3D input of parameterized walls and ceilings as well as subsequent adjustment of the geometry offer you advantages and benefits in the field of 3D BIM planning. 2D drawings from DWG or PDF files could also be used as a drawing template.


We, the team of DICAD Systeme GmbH, have been developing software for the construction industry for over 30 years. We specialise in the field of CAD/BIM processing in structural design. This focus has been a great success to this day. Thanks to our software STRAKON, DICAD is unsurpassed in engineering and precast construction, especially with regard to reinforcement planning. This makes the entire DICAD team proud and encourages further development..

Product: DICAD Strakon
Version: Premium 2020.3.2 *
Supported Architectures: x64
Website Home Page :

http://www.strakon.com

Language: English, Français, Deutsch, Polski
System Requirements: PC **
Supported Operating Systems: **
Size: 1.1 Gb

DICAD Strakon Premium 2020 with Patch 3
DICAD Strakon Premium 2020.3.2 Update Only
- Operating System: Windows 7even or newer
- Free Hard Disk Space: 2 GB of minimum free HDD
- Installed Memory: 4 GB of minimum RAM
- Processor: Intel Dual Core Processor or higher

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/B2BDA78911D49F5/Dl4ever_STRAKON2020.3.2.rar

RapidGator

https://rapidgator.net/file/3458b7a8c3440c559e1da76121c9d89f/Dl4ever_STRAKON2020.3.2.rar.html

[Dl43v3r]

File size: 365 MB | x64

XD CC Adobe - is the new creative tools from Adobe for the design of high-quality prototypes of user interfaces for mobile and Web applications. This tool is specifically designed for building rapid prototypes, as well as for high-fidelity user interface and design. With the help of Adobe XD CC anyone can create frames, high fidelity interactive prototypes and design applications and web sites. Once you will have a prototype, you can import visuals into Visual Studio or IDE of your choice to start creating the final application.

Interactive prototypes
Go to Prototyping with a click of Design. Combine drawing surfaces with each other to visualize navigation within large apps. Link design elements across the drawing area, B. Cells from repetition screens. Add interactions using visual controls to test and validate the experience.

Publish prototypes and get feedback
Generate weblinks to your designs that you can share with others to get feedback. Or embed it into a web page, For example on Behance. Comments can be attached directly to the prototype or to specific components of your design. You will be notified as soon as a comment has been added. To see your changes, checkers simply need to reload the link in the browser.

Liquid working with drawing surfaces
Whether you work with one or hundreds of workspaces, it does not matter: You can rely on the performance of XD. Create any number of designs for different screens and devices within a project. Pan and zoom without jerking or stuttering. Choose a template or define your own drawing area. Copy design elements between drawing faces while the layout is preserved.

repeating grid
Select an item in your design, Such as a contact list or a photo gallery, and duplicate it as often in the horizontal or vertical direction. All styles and distances are preserved. When you edit the item, the changes are applied to the entire design.
Platform-wide support

Control panel "Elements"
Colors and character formats are handy and reusable when you add them to the "Elements" panel (formerly "Symbols"). This panel also contains the icons. When you edit a color or format in the panel, the change is automatically performed throughout the document.

Next generation symbols
Work with time-saving symbols. The ready-to-use design components make it unnecessary to search for and edit each instance of an item in a document. When you edit an instance, all other instances are automatically updated. Overwriting certain entities is also possible. The symbols can be vector graphics, raster images or text objects, which you can also use as objects within repeating screens.

Creative Cloud libraries
With integration with Creative Cloud libraries, Adobe XD CC lets you access colors and character formats created in Photoshop CC, Illustrator CC, or any other Creative Cloud application, and use them in your design.

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/C9AB6303D5ECCD7/Dl4ever_Xd_28.1.12.rar

RapidGator

https://rapidgator.net/file/36a175c7302b53a6ae41d962a1dd2242/Dl4ever_Xd_28.1.12.rar.html

[Dl43v3r]

Windows x64 | Languages:English,German,Greek,French,Spanish,Ital ian,Portuguese-Portuguese,Portuguese-Brazil,Turkish | File size: 4.20 GB

Windows 10 is a series of personal computer operating systems produced by Microsoft as part of its Windows NT family of operating systems. It is the successor to Windows 8.1, and was released to manufacturing on July 15, 2015, and to retail on July 29, 2015. Windows 10 receives new releases on an ongoing basis, which are available at no additional cost to users. Devices in enterprise environments can receive these updates at a slower pace, or use long-term support milestones that only receive critical updates, such as security patches, over their ten-year lifespan of extended support.

System Requirements:
Processor: 1 gigahertz (GHz) or faster.
RAM: 1 gigabyte (GB).
Free space on hard disk: 16 gigabytes (GB).
Graphics card: DirectX 9 graphics device or a newer version.
Additional requirements to use certain features.
To use touch you need a tablet or monitor that supports multitouch.
To access the Windows store to download and run apps, you need an active Internet connection and a screen resolution of at least 1024 x 768 pixelsWhats New:

KB4532692:Compatibility update for installing Windows 10 1909: February 11, 2020
KB4538674:Servicing stack update for Windows 10, version 1903 and 1909: February 11, 2020
KB4517245:1909_Enablement_Package_387
KB4537759:Security Update for Adobe Flash Player: February 11, 2020
KB4534132:February 11, 2020-KB4534132 Cumulative Update for .NET Framework 3.5 and 4.8 for Windows 10 Version 1903 and Windows Server 1903 RTM and Windows 10,version 1909 and Windows Server, version 1909
KB4532693:February 11, 2020-KB4532693 (OS Builds 18363.657)

February 11, 2020-KB4532693 (OS Builds 18363.657)

Highlights
-Improves the installation experience when updating to Windows 10, version 1903.
-Updates to improve security when using Internet Explorer and Microsoft Edge.
-Updates to improve security when using Microsoft Office products.
-Updates to improve security when using input devices such as a mouse, keyboard, or stylus.

Improvements and fixes
-Addresses an issue that occurs when migrating cloud printers during an upgrade.
-Improves the installation experience when updating to Windows 10, version 1903.
-Security updates to Internet Explorer, Microsoft Edge, Windows Fundamentals, Windows Cryptography, Windows Virtualization, Windows Network Security and Containers, Windows Server, Windows Management, Microsoft Graphics Component, Windows Input and Composition, Windows Media, the Microsoft Scripting Engine, and Windows Shell.

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/39098FD2C5665FD/Dl4ever_W10.Pro.Edu.March.2020.part1.rar
https://nitroflare.com/view/8957A96FF7D8FC9/Dl4ever_W10.Pro.Edu.March.2020.part2.rar
https://nitroflare.com/view/031EF0EA7490FFC/Dl4ever_W10.Pro.Edu.March.2020.part3.rar
https://nitroflare.com/view/01F44D584C66A79/Dl4ever_W10.Pro.Edu.March.2020.part4.rar
https://nitroflare.com/view/0CFF984493D20E4/Dl4ever_W10.Pro.Edu.March.2020.part5.rar

RapidGator

https://rapidgator.net/file/a1f46351da0b77b4360d9ca821983005/Dl4ever_W10.Pro.Edu.March.2020.part1.rar.html
https://rapidgator.net/file/2768eeffa6690d8fb6d228ac14aa74d5/Dl4ever_W10.Pro.Edu.March.2020.part2.rar.html
https://rapidgator.net/file/bfdb3ed945b8986759691f7e9db10802/Dl4ever_W10.Pro.Edu.March.2020.part3.rar.html
https://rapidgator.net/file/aa399724c7f2806fc627cd8d3fe0a865/Dl4ever_W10.Pro.Edu.March.2020.part4.rar.html
https://rapidgator.net/file/4c15852e37bb5e1c5ca11c9f080a74f9/Dl4ever_W10.Pro.Edu.March.2020.part5.rar.html

[Dl43v3r]

x64 | Language:Multilanguage | File Size: 547 MB

Professional 2D Technical Illustrations. Servigistics Arbortext IsoDraw delivers 2D technical illustrations and intelligent graphics to optimize product and service information in the forms of assembly instructions, parts catalogs, operator and service manuals, and training documents. It enables users to automate the process of creating and updating high-quality technical illustrations from scratch or from original 2D and 3D CAD systems. In addition, it maintains an associative link to up-to-date CAD data to automate the updating of illustrations when engineering designs change throughout the product lifecycle. Servigistics Arbortext IsoView provides a web-based, interactive viewing environment that allowing users to zoom, pan, rotate, annotate, or otherwise manipulate illustrated technical information. This enables readers to view and interact with 2D and 3D technical illustrations and animations created by Servigistics Arbortext IsoDraw, or other illustration tools. Servigistics Arbortext IsoView allows for easy delivery of technical illustrations in an interactive environment that can be integrated with external applications.

Features & Benefits:
Accelerate information time-to-market: Produce more illustrations in less time
Reduce translation costs: Replace lengthy, complex text with illustrations
Increase illustrator productivity: Automate illustration creation and update processes by maintaining an associative link to original CAD files
Eliminate labor-intensive formatting: Automate publishing in multiple delivery formats, including print, interactive and Web media

Details:
PTC Arbortext IsoDraw 7.3 M100
Year / Release Date:2020
Version:7.3 M100 Build M2UDtI
Developer:PTC Developer's
Architecture:x64
Language:Multilingual (Russian is not present) Chinese Simplified, Chinese Traditional, English, German, French, Japanese, Italian, Korean, Spanish
Tabletka:Present (TeAM SolidSQUAD-SSQ)Whats New:read:readme.pdf

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/A5FAD06726B2106/Dl4ever_IsoDraw.7.3.M100.rar

RapidGator

https://rapidgator.net/file/50d1c7516fb2acd2b4331173ffb6bd22/Dl4ever_IsoDraw.7.3.M100.rar.html

[Dl43v3r]

Trimble Tekla Structures 2020 build 56544 (x64) Multilanguage | 2.81 Gb

Trimble has released an update to Tekla Structures 2020, is much more than design and detailing software: it is the most accurate and comprehensive 3D building information modeling (BIM) tool in the market that streamlines the workflow from sales, bidding, cost estimation and conceptual design to detailing, manufacture and erection. This release arrives with improvements and fixes - be it drawings, collaboration, or modeling complex geometries or reinforcement.


Compatibility This version is not backwards compatible. When you create or save a model in Tekla Structures 2020, you cannot open it in older versions due to database differences.About Tekla Structures 2020 This version includes improvements and fixes for example in drawings, collaboration and modeling complex geometries or reinforcement. As a practical example of what the new version has to offer is modeling structures like spiral shaped stairs, which can become quick and easy with the new Spiral Beam. Working with steel bent plates is now easier, while Precast Concrete Floor and Wall Layout and the flexible, intelligent Tekla method for modeling and modifying reinforcement have been improved. Creating more complete drawings becomes faster, and DWG export functionality is more efficient.

In addition, there are new tools on top of Trimble's collaboration platform, Trimble Connect, for model and cloud-based supply chain management between Tekla Structures and Trimble Connect.

Tekla Software by Trimble. Trimble produces Tekla software solutions for advanced BIM and structural engineering workflow within the Trimble Buildings portfolio. Trimble's construction solutions range from total stations to advanced software, giving the industry tools to transform planning, design, construction and operation of buildings. Tekla software is at the heart of the design and construction workflow, building on the free flow of information, truly constructible models and collaboration.

About Trimble Buildings. Trimble Buildings, a part of Trimble's engineering and construction segment, is focused on solutions that optimize the complete design-build-operate (DBO) lifecycle of buildings. Trimble is dedicated to transforming the industry-increasing productivity, reducing waste and optimizing schedules, budgets and real estate portfolios-with powerful solutions that streamline communication and collaboration. These targeted solutions enable architects, engineers, contractors, owners, and occupiers to realize greater agility, efficiency and insight. Used in over 150 countries around the world, Trimble Buildings' solutions are transforming the way the world designs, builds and operates infrastructure and buildings.

About Trimble. Trimble is transforming the way the world works by delivering products and services that connect the physical and digital worlds. Core technologies in positioning, modelling, connectivity and data analytics enable customers to improve productivity, quality, safety and sustainability. From purpose built products to enterprise lifecycle solutions, Trimble software, hardware and services are transforming a broad range of industries such as agriculture, construction, geospatial and transportation and logistics.

Include Environments

Home Page -

https://www.tekla.com/

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/3D06F165E0A7F2F/Dl4ever_Tekla.Structures.2020.56544.part1.rar
https://nitroflare.com/view/1E03D3ED703A105/Dl4ever_Tekla.Structures.2020.56544.part2.rar
https://nitroflare.com/view/D02CAC484790B42/Dl4ever_Tekla.Structures.2020.56544.part3.rar

RapidGator

https://rapidgator.net/file/23fdaa57fadd5cd5294d529c3564882d/Dl4ever_Tekla.Structures.2020.56544.part1.rar.html
https://rapidgator.net/file/05c535225ca09a7101c67b1262e59737/Dl4ever_Tekla.Structures.2020.56544.part2.rar.html
https://rapidgator.net/file/7584bf27a4c7dbe7e53e9bf5a716181c/Dl4ever_Tekla.Structures.2020.56544.part3.rar.html

[Dl43v3r]

Helium Music Manager 14.6 Build 16364 Premium Multilingual | 26 Mb

Helium Music Manager is a music manager that can rip, tag, play, browse, search, rename, burn and synchronize your music with a portable player. You can take control of your music collection. Stop spending time looking for files on your computer or hunting through CDs, vinyl records and tapes - instead, simply enjoy and explore your music! Helium Music Manager can replace your ripper, player, tag editor and other audio related software.


Helium Music Manager is a music tagger, renamer, cataloguer, browser, playlist manager and report creator. It can catalogue, edit and play the most common music formats (MP3, Ogg, WMA, iTunes M4A, FLAC, APE and MPC) as well as standard Audio CDs. Catalogue your entire music music collection with just a few clicks, regardless which media the music is stored on. Use the new built in Music Information Browser to navigate through your music collection in an intuitive manner by means of a Web style user interface.

Helium makes it easy to find your favorite music by searching for criteria such as Artist, Title, Genre, Rating etc. Avoid manual typing by downloading artist and title information from various sources on the Internet (CDDB, Amazon.com, AllMusic, Discogs to mention a few). Helium supports downloading of album pictures, artist pictures, track information, artist relations, biographies, discographies and lyrics.

• Supports your iPod or Zen. Synchronize and play music from your iPod, Creative Zen, mobile phone or other portable device. Helium Music Manager supports a wide variety of players.
• Explore your music your way. Browse and play your music depending on the situation. Be the DJ - take your entire collection on your laptop to your friends party. Impress your family - bring Helium Music Manager to your Full-HD television and redefine music entertainment!
• Download covers for your albums. Easily find your albums by browsing their album art. Helium Music Manager has built-in facilities to quickly find and download album art.

Helium Music Manager Features:
• Import
Supports mp3, mp4, flac, ogg, wma and more as well as audio CDs, vinyl and tapes.
For user with large collections we offer support for Microsoft SQL Server and MySQL for improved performance.
• Tag
Add or correct missing or incorrect meta-data using the many tools available for tagging your files.
Remove, switch, add or copy tag contents between files and fields using batch operations.
• Manage
Download album pictures, analyze quality and repair broken mp3 files.
Automatically rename files and create custom folder structures, convert files to different formats.
• Explore
Many different ways of browsing your music. Album and artist pictures as well as detailed listings.
Easily filter your content, search for your favourites and create playlists.
• Play
Play music, scrobble to Last.fm, stream through Shoutcast. Show your friends what you are playing on Windows Live Messenger.
Display visual effects and enjoy automatic playback with built-in features.
• On-the-go
Synchronize to your iPod, Creative Zen or other portable music device, cell phone or netbook.
Burn Audio or Data CDs, export playlists and create reports for printing.

Operating System: Windows Server Server 2008, Server 2012, Windows 7, 8, 8.1, 10 (32-bit, 64-bit)

Home Page -

https://www.imploded.com/

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/7CDF4686F1D5E9C/Dl4ever_Music.Manager.14.rar

RapidGator

https://rapidgator.net/file/5f84915d58ae03d13db6ebcc2c9fa3bc/Dl4ever_Music.Manager.14.rar.html

[Dl43v3r]

R-Wipe & Clean 20.0 Build 2269 | 22.8 Mb

R-Wipe & Clean is a complete R-Tools solution to remove useless files, free up your disk space, and clean various privacy-compromising information on your online and offline activity. This includes internet history and cookies, lists of downloaded files and opened documents, various data caches, temporary files, and many more items, created by the operating system, most contemporary internet browsers and communication programs, and by hundreds of third-party applications.


It is also possible to create specific lists of traces to be cleaned for unsupported applications. All small computer cleaning and file erasing jobs can be combined into large computer cleaning tasks that can be started immediately, or at scheduled time/events.

Computer Cleaning
Traces Selection helper: a tool to quickly select some of the most common traces to clean.
Cleaning Internet activity: removing traces from most contemporary browsers and communication programs.
Cleaning personal traces: removing various lists, logs, caches, temporary files, and other traces of your activity.
Cleaning system traces: removing registry traces, temp files, system history, and various log files.
Cleaning traces from various third-party programs: removing various caches, logs, temporary files, recent file lists, and other traces left by applications.
Cleaning can be performed as a background task and computer can be turn off upon its completion.

Wiping
Support for SSD devices: R-Wipe & Clean correctly recognizes SSD devices and by default wipes only necessary data on the disk preventing them from additional wear.
Strong or fast erase algorithms, including DoD-approved, for wiping files and free disk space.
Support for FAT/exFAT and NTFS file systems.
Wiping files' alternate data streams and cluster "tips", or free parts of file clusters.
Wiping files directly from File Explorer.
Wiping free space on a single disk directly from its shortcut menu.
Wiping unused space of several disks through one single wipe task.
Wipe records of small files stored directly in the NTFS Master File Table.
Predefined wipe lists of files, folders, and Registry keys to be wiped through a single task. Files or folders can be added to a current wipe list directly from File Explorer.

Advanced Features
All separate cleaning and wiping actions can be combined into large wipe and clean tasks to launch them manually or at scheduled times or events (user log-on/log-off, system start-up/shutdown, closing any or all browsers, etc.)
Detailed representation of all trace items on your computer.
Detailed logging of all wipe and clean operations.
Customization: R-Wipe & Clean can hide those items you will never want to clean.
Full system integration: Most wipe and clean operations can be performed directly from Windows.
Password protection.
R-Wipe & Clean Smart: an advanced tool to create and manage very complex wipe lists.
Cleaning and wiping task can be started from a command line.
Boss Key to close a web-browser in emergency.
Stealth mode to hide computer cleaning.
Standby/hibernate control: Your computer will not hibernate until R-Wipe & Clean finishes its long job.
Startup Renaming for files/folders locked by Windows and other programs. They will be renamed and cleaned during the next start-up.

System Requirements
An Intel-compatible platform running Windows 7/8/8.1/10 or Windows Server 2008 R2/2012/2012 R2/2016.
The administrative privileges are required during installation to install R-Wipe & Clean's Windows Explorer shell extensions.

Home Page -

https://www.r-wipe.com/

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/1B23C290238406A/Dl4ever_R-Wipe.Clean.20.rar

RapidGator

https://rapidgator.net/file/c66f572a57d1a23a10271d56031daa9f/Dl4ever_R-Wipe.Clean.20.rar.html

[Dl43v3r]

Altair Compose 2019.4 Build 4965 | 1.1 Gb

The Altair product team is pleased to announce the availability of Compose 2019.4 Build 4965. This release includes a variety of bug fixes and technical improvements as well as new features and enhancements.


New Features:

OML Language Improvements
- Sparse matrices support is enhanced (substraction, diag, find).
New OML Language Commands
- addlibrary()
Plotting and GUI Improvements
- gridon/off for surface and contour plots (meshlines property added).
- colorbar() command added.
- title() supports cell input.
- Multi-selection enabled in uicontrol.

Resolved Issues
The following issues (and more) have been resolved for Compose 2019.4:

- Help redirection issue for non-documented commands or functions.
- Crash in function contains.
- Plot options dialog appears truncated in small plot windows.
- sortrows issue with second argument (descending order).
- Clicking View from the menu bar leads to a crash on Linux.
- Crash with matrix indexing.
- Missing imshow documentation.
- Applying colormap to imshow image results in crash.
- Plot disappears when docking a plot.
- Crash using dot operator.
- f06 reader cannot read some parts of the data.
- Missing documentation for time data in H3D commands.
- Console mode execution of commands/scripts causes crash.
- On Linux, system command doesn't work properly.
- Memory leak with dot product operation.
- Application crashes when indexing cell with end.
- Error with class inheritance.
- Error in format specified for textscan.
- Part of the elements are missing when reading H3D file.
- whos not working for a sparse matrix.
- No warning in the interface when R_HOME is not defined (mandatory to call the R interpreter in Compose).
- Set class as logical.
- Plot options dialog loses focus when invoked.
- Crash from sprintf command.
- Values for waitbar (uicontrol) are not updating.
- rmdir should work for directories with Unicode characters.
- plot() changes xlim/ylim with hold on.
- Failed to change directory to root under Linux.
- Issue with folder path with special characters.
- Application crashes when indexing uitable data with illegal syntax.
- License expiration message box displayed twice.
- Set visible for textbox doesn't work as expected.
- Curve legend highlight color issue in font.
- line() and scatter() cannot set marker properties during initialization.
- X-axis color changed after you set bar plotting to Horizontal Bar Orientation.
- mkdir does not work properly when the input is not an English name.
- title does not work properly on 3D plotting.

Altair Compose enables engineers, scientists, and product creators to efficiently perform calculations one at a time or grouped together in the form of scripts facilitating process automation. Compose also enables the analysis, processing, and visualization of data such as from CAE or test results. It is an interactive & unified programming environment for all types of math - including matrix analysis, differential equations, signal processing, control design, optimization, and much more.

Model Based Development with solidThinking Compose, Activate and Embed


Founded in 1985, Altair is focused on the development and application of simulation technology to synthesize and optimize designs, processes and decisions for improved business performance. Privately held with more than 2,600 employees, Altair is headquartered in Troy, Michigan, USA with more than 45 offices throughout 20 countries, and serves more than 5,000 corporate clients across broad industry segments.

Product: Altair Compose
Version: 2019.4 Build 4965
Supported Architectures: x64
Website Home Page :

http://www.altair.com

Language: english
System Requirements: PC *
Supported Operating Systems: *
Size: 1.1 Gb

Operating System
Windows 7, 8.1 and 10.
64 bits only
Hardware
OpenGL graphics card with at least 256 MB of onboard memory.
Integrated Intel graphics hardware is currently not supported.
Memory
4 GB of RAM (8 GB recommended).
10 GB or more of free hard disk space.

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/1CF0DAA1190C2D1/Dl4ever_Compose.2019.4.part1.rar
https://nitroflare.com/view/E0C3A57950E5E42/Dl4ever_Compose.2019.4.part2.rar

RapidGator

https://rapidgator.net/file/6c287484c5d1058abff5ddab338fbfa4/Dl4ever_Compose.2019.4.part1.rar.html
https://rapidgator.net/file/dcd5e9dd3129e81614f2218edb1f9c02/Dl4ever_Compose.2019.4.part2.rar.html

[Dl43v3r]

Photo Pos Pro 3.63 Build 22 Premium Edition | 92 Mb

With +10,000,000 Downloads, Photo Pos Pro became one of the most popular photo editors around the world! Version 3 has free and premium photo editing features offers users a wide variety of possibilities in the fields of Image Enhancing and Image Editing and in the field of Computer Graphics Design. Using the editor you can perform various tasks, from simple basic tasks to complex tasks; you can edit existing images, create new works based on existing images, create new works from scratch and more.


V3 Top Features List
Photo Pos Pro support all standards professional features as Filters, Layers, Masks, Curves, Scripts, Effects, Brushes and etc.

- Remove/erase/replace backgrounds
- Remove unwanted objects
- Fix poor photos
- Frames and Collages
- Advanced Photo Effects
- Stunning Text Effects
- RAW Files support

Powerful tools and functions
The software support of many picture file types including RAW FILES, Support of scanners and digital cameras, Advanced Image Enhancing and editing tools and functions, Tools for creating Computer Graphics Design, Rich Text Tools, Special Effects, Selection Tools, Layers & Masks, Gradients, Patterns and Texture, Script Tools, Batch Operations and also The Ability to expand the software yourselves!

Though the Photo Pos Pro photo editor is a powerful program, it contains an extremely user-friendly interface enabling you to work intuitively. If you are a beginner you can easily begin to use the program in an intuitive fashion. The program offers beginning users a Help system which they can follow step by step into the wonderful world of Digital Picture Enhancement. With the Help system, you can turn from a beginner to a professional user.

Experienced users
If you are an experienced user, you will probably be amazed to discover the infinite possibilities which the program has to offer in the fields of Digital Image Enhancement and Computer Graphics. Advanced users will discover advanced editing and creating possibilities; they will find all they need to work in an efficient manner in the professional Help system which comes with the program.

Minimum system requirements:
- Pentium(R) 350Mhz/equivalent processor or faster.
- 2GB of RAM.
- 300 MB of free disk space.
- 24-bit color display adapter.
- 1024x768 resolution.
- Windows XP / Vista / 7 / 8 / 10.
- MAC with Windows Apps emulator installed

Home Page -

https://www.photopos.com/PPP3_BS/Default.aspx

-:DOWNLOAD FROM LINKS:-

NitroFlare

https://nitroflare.com/view/D28899C3A0336A6/Dl4ever_Photo.Pos.3.63.rar

RapidGator

https://rapidgator.net/file/fc902a8155fe22071c8e1532d09996fe/Dl4ever_Photo.Pos.3.63.rar.html