Старый 26.03.2019, 14:05   #6931
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию 7-Data Photo Recovery Enterprise 1.9 Multilingual



File size: 2.20 MB

Digital photo recovery software for local drives and removable devices, it effectively recovers lost, deleted, corrupted or formatted photos, images, video and audio files from various storage devices including SD/memory card, USB/local drive, camera, and mobile phone.

- Recovers lost, deleted, corrupted or formatted photos and video
- Recover photos, images, videos, audio files in various formats
- Recover from memory card, USB/local drive, camera and phone

Supported Image/Photo Recovery Scenarios
- Photo or image accidentally deleted from digital camera
- Photo or image deleted from local or external drives
- Photo or image unintentionally deleted from memory card, USB drive
- Photo or image accidentally deleted from mobile phones (excluding iPhone)
- Photo or image accidentally emptied from recycle bin
- Photo or image lost due to formatted partition/drives/external drives
- Photo or image lost because of memory/SD card failure
- Photo or image lost due to damage of your digital camera
- Photo or image lost for other possible reasons

Supported Image/Photo Formats
- 3d Studio Max (.max), ANI(.ani), Adobe Illustrator(.ai)
- Bitmap(.bmp), COREL Draw (.cdr), Corel Draw Corel RAVE Image (.clk)
- Corel Draw Vector Image (.cmx), Canon Raw graphics(.crw)
- Cursor file(.cur), AutoCAD Drawing(.dwg), AutoCad DX File(.dxf)
- Enhanced Meta file(.emf), Encapsulated Postscript(.eps)
- Freehand 10 file(.fh11), GIF graphics file(.gif), Icon file(.ico)
- JPEG Graphics (.jpg.jpeg), Portable Network Graphic(.png)
- Adobe Photoshop(.psd), Paint Shop Pro(.psp), Q uattroPro 7 File(.qpw)
- Corel Presentation File(.shw), Tagged Image(.tif)

Supported Video/Audio Recovery Scenarios
- Video or audio accidentally deleted from digital camera
- Video or audio deleted from local or external drives
- Video or audio accidentally deleted from memory card, USB drive
- Video or audio unintentionally deleted from mobile phones (excluding iPhone)
- Video or audio accidentally emptied from recycle bin
- Video or audio lost due to formatted partition/drives/external drives
- Video or audio lost because of memory/SD card failure
- Video or audio lost due to damage of your digital camera
- Video or audio lost for other possible reasons

Supported Video/Audio Formats
3GP Multimedia(.3gp), Audio Streaming Format(.asf), AU file(.au), Audio Video Interleave(.avi), Musical Instrument Digital Interface(.mid), MOV Multimedia(.mov), MP3 Music(.mp3), MP4 Multimedia(.mp4), ShockWave Flash file(.swf), WAVE Multimedia (.wav), WMF Multimedia file(.wmf)

Supported Photo Storage Devices
DE HDD, SATA HDD, SCSI HDD, FireWire HDD, SSD, USB HDD, External HDD, Hardware RAID, Floppy drive, USB flash drive, Compact flash card, Secure Digital card, Memory card/Memory stick, Micro card, Zip drive, IPod, Other storage devices

Supported Photo Card Types
- Secure Digital, SD card, SDHC, miniSD, MicroSD (TransFlash)
- Compact Flash, CF Type I, Type II, MicroDrive, CF card
- Memory Stick, Memory Stick Pro, Duo, Pro-HG, XC, Micro(M2)
- MultiMedia card, MMC card
- SmartMedia, flash card, xD Picture card
- Cellular phone, mobile phone memory card and digital media recovery
- MicroSD or MicroSDHC card used by Android smart phone
- USB flash drive digital image

Supported Photo Card Manufacturers
SanDisk, Kingston, KingMax, Sony, Lexar, PNY, PQI, Toshiba, Panasonic, FujiFilm, Samsung, Canon, Qmemory, Transcend, Apacer, PRETEC, HITACHI, Olympus, SimpleTech, Viking, OCZ Flash Media, ATP, Delkin Devices, A-Data

Whats New:
Updates: official site does not provide any info about changes in this version.

HOMEPAGE
Код:
http://7datarecovery.com


Download From UploadGig

Код:
https://uploadgig.com/file/download/1b12f6eef3b238F1/BaDshaH_7data-phr.rar
Download From Rapidgator

Код:
https://rapidgator.net/file/08a45d941e1701c5431380623e7259de







BaDshaH вне форума   Ответить с цитированием
Старый 26.03.2019, 14:07   #6932
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию 7-Data Partition Recovery Enterprise 1.9 Multilingual



File size: 2.20 MB

"7-Data Partition Recovery" is particularly designed to recover data from lost, deleted or damaged partitions by accident. This partition recovery software also helps to recover your data when hard drive crashed, MBR corrupted, disk repartitioned (fdisk) or partition overwritten etc.

- Recover from lost, deleted, corrupted or formatted partitions
- Restore the recovered files in exactly the same original structure
- Very easy-to-use with step-by-step wizard process design

Supported File Systems
EXFAT, NTFS5, NTFS, FAT32, FAT16, FAT12

Supported Storage Devices
7-Data Partition Recovery supports a wide range of storage devices including: DE HDD, SATA HDD, SCSI HDD, FireWire HDD, SSD, USB HDD, External HDD, Hardware RAID, Floppy drive, USB flash drive, Compact flash card, Secure Digital card, Memory card/Memory stick, Micro card, Zip drive, IPod, Other storage devices

Supported Disk Brand
7-Data Partition Recovery supports a wide range of disk manufacturers including: Digital (My Passport, My Book, Elements); Seagate (FreeAgent, GoFlex, Expansion, Satellite, Replica); HP (Pocket Media, SimpleSave); IoSafe, Silicon Power, Transcend, Kingston, Imation, Fujitsu, Quantum, Samsung

Supported Card Brand
SanDisk, Kingston, KingMax, Sony, Lexar, PNY, PQI, Toshiba, Panasonic, FujiFilm, Samsung, Canon, Qmemory, Transcend, Apacer, PRETEC, HITACHI, Olympus, SimpleTech, Viking, OCZ Flash Media, ATP, Delkin Devices, A-Data

Supported File Search Parameter
File Name, File Extension, File Mask, File Location, File Type, Date Modified, Date Created, Date Accessed, File Size, Case Sensitive

Whats New:
Updates: official site does not provide any info about changes in this version.

HOMEPAGE
Код:
http://7datarecovery.com


Download From UploadGig

Код:
https://uploadgig.com/file/download/3846E7525f382809/BaDshaH_7data-ptr.rar
Download From Rapidgator

Код:
https://rapidgator.net/file/81506e732372dfb857cc995f3f5f101e







BaDshaH вне форума   Ответить с цитированием
Старый 26.03.2019, 14:10   #6933
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию DocuFreezer 3.0.1903.20130



File size: 84.21 MB

Convert PDF to JPG, XPS to PDF, TIFF to JPG, HTML to PDF, etc. DocuFreezer is designed to convert Microsoft Word, Excel, PowerPoint, HTML, XPS and plain text documents to PDF saving internal and external links, page layouts and fonts.

Users of DocuFreezer will benefit from numerous conversion options - the software will convert documents and PDF files to JPG, TIFF or PNG formats "freezing" the look of the original documents and protecting them from any amendments. No matter which device the document will be displayed on, it will look exactly the same.

DocuFreezer common application and features list

Convert documents to PDF
Drag and drop your files to DocuFreezer, select PDF as the output file format and click Start. DocuFreezer will convert any number of text documents, presentations and spreadsheets to PDF automatically!

Document imaging
DocuFreezer will release you from printing documents on paper and then scanning them to make a digital copy. The quality of output PDF or an image file will be significantly higher than the ones scanned!

Data exchange
Same documents may have a different look depending on the operating system you use: Windows XP, Windows 8, Mac, etc. To make them platform independent convert the documents to PDF or JPEG formats.

Convert to JPG, TIFF or PNG
DocuFreezer can convert text documents, presentations or spreadsheets to JPG, TIFF or PNG formats making the process smooth for any number of documents.

Archiving Documents
In case you need to archive documents, you should be able to open them several years after and likely on a new computer. This will be possible if you convert documents to PDF before uploading them on the backup storage.

Publishing documents to the web
Before publishing documents and presentations on the website, convert them all to PDF or JPG - these formats are standard for data publishing and will make the documents look the same on any devices and Internet browsers.

RELEASE NOTES
Код:
https://www.docufreezer.com/overview/version-history
HOMEPAGE
Код:
https://www.docufreezer.com/


Download From UploadGig

Код:
https://uploadgig.com/file/download/328d798D7ad79367/BaDshaH__DocuFreezer.3.0.1903.20130.rar
Download From Rapidgator

Код:
https://rapidgator.net/file/a2eb3a92d707c519d87e80056b854254







BaDshaH вне форума   Ответить с цитированием
Старый 26.03.2019, 14:11   #6934
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию Artifact Interactive Garden Planner 3.7.7



File size: 128 MB

Design your dream garden with this very easy to use program. Arrange plants, trees, buildings and objects using an easy to use 'drag and drop' interface. Use tools to quickly create paving, paths and fences. Then produce a high quality color print out of your design.

Features:
• Very easy to use interface
• Save and Load your own designs.
• Use a wide range of generic plant shapes to design your garden, so you dont need to be a botanist to use it
• Produce a professional looking print out of your plan
• Use tools to quickly create paving, fences and paths.
• Generate a report of all the plants and objects in your garden
• Create a library of custom plants

Whats New:
Updates: official site does not provide any info about changes in this version.

HOMEPAGE
Код:
http://smallblueprinter.com


Download From UploadGig

Код:
https://uploadgig.com/file/download/465d70A68f734452/BaDshaH_Garden_Planner_3.7.7.rar
Download From Rapidgator

Код:
https://rapidgator.net/file/a3d55bdc5b404a5001e99734e3aa9d35






BaDshaH вне форума   Ответить с цитированием
Старый 26.03.2019, 14:14   #6935
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию Steelray Project Analyzer 2019.3.31



File size: 302 MB

Steelray Project Analyzer is software that takes the pain out of creating, maintaining and delivering quality schedules. With Analyzer, you can evaluate your project schedule for quality and performance in minutes and produce understandable results. Schedules can be analyzed against project management best practices, internally defined best practices and government best practices. Analyzer supports Microsoft Project, Primavera P6 and UN/CEFACT XML.

Easy to Read Scorecard
Our innovative scorecard shows you the results of each check at a glance, using easy to read green, yellow, and red indicators. Our innovative score strip shows you a great deal of information in a compact space. Each scale is completely customizable.

Powerful report gallery
Analyzer comes pre-configured with all of the reports needed to analyze the quality of your schedule. In addition to our innovative scorecard, Analyzer includes the DCMA 14 Point Assessment, a schedule comparison report, a validation report, a longest path tool, and many more.

DCMA EVAS and 14 Point Metrics
The Defense Contract Management Agency EVAS Metrics and 14 Point assessment are a series of checks that help ensure that your schedule has a trustworthy critical path. Steelray Project Analyzer provides reports that run these assessments on your schedule and explains the results in a clear, easy to understand format.

Built-In Scheduling Enyclopedia
Steelray Project Analyzer includes The Coach, a built-in encylopedia that dives deeper into your results, explaining the in simple terms. For some users, The Coach teaches them the fundamentals of schedule quality. For others, it serves as a quick reference.

Jump to the Native Schedule
When tasks are flagged by Analyzer, simply click on a hyperlink to filter those tasks in the native scheduling application (e.g. Microsoft Project). Steelray Project Analyzer provides a smooth workflow to fixing schedule quality issues.

Whats New:
Improvement: Updated DCMA 14 Point Assessment to exclude inactive tasks.
Improvement: Notification added for Critical Path Length Index criterion (14 Point Assessment Report) when the project's status date is not set.
Bug Fix: GAO Excel export updated to exclude inactive tasks.
Improvement: Added Critical metric to several criterion on the Dynamic Schedule Compare report.

HOMEPAGE
Код:
https://www.steelray.com/ProjectAnalyzer/Analyzer.php


Download From UploadGig

Код:
https://uploadgig.com/file/download/931aD3abc288F3E3/BaDshaH_Steelray_Project_Analyzer_2019.3.31.rar
Download From Rapidgator

Код:
https://rapidgator.net/file/18af83c16fd835b5bef722f42812fba1






BaDshaH вне форума   Ответить с цитированием
Старый 26.03.2019, 14:15   #6936
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию VovSoft VoV Picture Downloader 1.7



File size: 6.8 MB

Picture downloader to find and download millions of pictures from the web easily. Vov Picture Downloader features a simple interface comprising two separate tabs, one for searching for images using a search engine, and the other for performing a search on a specific website.

What's new:
Supported WEBP image filetype
Supported SSLv23, TLSv1, TLSv1_1, TLSv1_2

HOMEPAGE
Код:
https://vovsoft.com/software/vov-picture-downloader/


Download From UploadGig

Код:
https://uploadgig.com/file/download/005e2a99ea850D9b/BaDshaH_VoV_Picture_Downloader_1.7.rar
Download From Rapidgator

Код:
https://rapidgator.net/file/d83bac714e1086d08cd16e269b5bca7e






BaDshaH вне форума   Ответить с цитированием
Старый 26.03.2019, 14:23   #6937
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию AusLogics BoostSpeed ​​10.0.24.0 RePack & Portable by KpoJIuK



File Size: 22.12 MB

BoostSpeed scans your computer to pinpoint the issues that may be responsible for the slowdown, and provides a safe and easy way to fix them along with a complete kit of powerful tools to enhance every aspect of your PC's performance. At a click of a button it does all of the following (or only parts you want done): cleans out junk, fixes the registry, tweaks Windows and Internet settings, defragments the hard drive - all to get your PC running fast and smooth again.

Discover and fix what makes your PC slow!
- Award-winning optimizer that will clean, fix and speed up your PC in a few simple clicks
- Experts recommend BoostSpeed as effective, fast and a program the entire family can use
- You get immediate PC speed improvement

To prevent PC trouble and make your life easier, BoostSpeed will
- Pinpoint the issues behind reduced performance
- Defrag your HDD, clean out junk and repair registry
- Speed up you PC and clean up your web browsers
- Help protect your privacy and recover deleted files
- Give you 15+ easy-to-use PC maintenance tools

You get over 20 tools in BoostSpeed to cover every need:
- Defrag files for maximum hard drive efficiency
- Stop unneeded services to free up memory
- Explore your disk drives for biggest space hogs
- Free up disk space from all types of junk files
- Disable unneeded startup items for faster boot
- Tweak system settings for improved experience
- Recover files that got deleted in error or by a virus

Whats New
Код:
http://www.auslogics.com/en/software/boost-speed/popup/history
Build Info:
Type: installation, unpacking portable [jooseng]
Languages: Russian, english, multi
Activating: RadiXX11

command-line options:

Silent Installation: / S / I
Unpacking portable: / S / P
Do not create desktop shortcuts: / ND
Do not create shortcuts Start menu: / NS
Selecting the installation location: / D = PATH

The / D = PATH parameter should be specified as the last one.
For example: AusLogics.BoostSpeed.v10.0.9.0.exe / S / I / D = C: \ MyProgram

HOMEPAGE
Код:
http://www.auslogics.com/


Download From UploadGig

Код:
https://uploadgig.com/file/download/44839cf45A2a27ad/BaDshaH_AusLogics.BoostSpeed.v10.0.24.0.zip
Download From Rapidgator

Код:
https://rapidgator.net/file/41a40497e5bbbf9e6ac54a138e6e02dc






BaDshaH вне форума   Ответить с цитированием
Старый 26.03.2019, 14:56   #6938
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию UUbyte ISO Editor 4.7.1



File size: 8.96 MB

UUByte ISO Editor is a complete toolkit for ISO burning, editing, extracting and copying. You can perform most of the actions on ISO image at one place. You will not find other programs like UUByte ISO Editor made by such user friendly interface with powerful features.

• Burn ISO image directly to USB drive or CD/DVD disc.
• Make bootable USB or CD/DVD from ISO file.
• Free to edit any ISO file and re-pack it to a new ISO file..
• Extract content from ISO file in seconds no matter how large is.
• Copy entire DVD disc to local drive in ISO format.

Supported OS: Windows XP/Vista/Windows 7/Windows 8/Windows10

RELEASE NOTES
• official site does not provide any info about changes in this version.

HOMEPAGE
Код:
https://www.uubyte.com/


Download From UploadGig

Код:
https://uploadgig.com/file/download/c8272ffbd0f90861/BaDshaH_ISO.Editor.4.7.1.rar
Download From Rapidgator

Код:
https://rapidgator.net/file/f3619482fed9287e506e3a849fcdf47c







BaDshaH вне форума   Ответить с цитированием
Старый 26.03.2019, 14:58   #6939
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию Systweak Disk Speedup 3.4.1.17936 Multilingual



File size: 5 MB

In a perfect world, every file on your hard drive would be stored in one clump of data. In tech-talk, we say that each file would be stored on contiguous sectors on your drive. It's quick and easy for Windows to open a file that has been stored on contiguous sectors because the read-write heads have to move a tiny distance from sector to sector.

Over time, files become fragmented. As you install and uninstall software, and as you update and save files, they tend to be stored in chunks all over your hard drive. This causes two issues. First, it slows down your computer because the read-write heads are moving wildly each time you read or write a file. Second, it wears out your hard drive. Disk Speedup defragments the hard drives and arranges fragmented files sequentially. This solves both issues.

Easy to Use
Speeding up your system's performance has never been easier. Disk Speedup's intuitive interface makes it simple to safely defrag your hard drive. With a few simple clicks, you'll boost system performance and save wear and tear on your hard disk.

Safe and Secure
You can be confident that Disk Speedup will defragment your hard drive safely and securely. The software doesn't overwrite the old data until it checks that the new data has been written correctly. So you can pause or stop the defragmentation process at any time, with no danger to your data.

Fix Hard Disk Issues
Windows has a built-in defrag program. And if there are no issues on your hard drive, it can work quite nicely. By contrast, Disk Speedup has a built-in Disk Doctor that checks your drives and files for issues, and fixes them. Unlike Windows, Disk Speedup knows how to handle bad sectors on your hard drive.

Checks Hard Disk Health
Just as modern cars have built-in diagnostic capabilities, today's hard drives keep statistics on how much wear and tear they have experienced. Disk Speedup accesses this data and reports it in plain English.

Minimal Space Needed to Defrag
Using the defragmentation program that comes with Windows is easy if your hard drive has a lot of free space on it. As your hard drive becomes 75 or 80 percent full, however, the Windows utility becomes less and less capable of doing its work. Disk Speedup is designed for the real world. Many people don't start thinking about defragging their hard drive until it becomes full and sluggish. And that's where Disk Speedup shines.

Operating System: Windows 10/8.1/8/7/Vista and XP (both 32 bit and 64 bit)

RELEASE NOTES
official site does not provide any info about changes in this version.

HOMEPAGE
Код:
https://www.systweak.com/disk-speedup


Download From UploadGig

Код:
https://uploadgig.com/file/download/e1E6403a86c37144/BaDshaH_Systweak_Disk_Speedup_3.4.1.17936.rar
Download From Rapidgator

Код:
https://rapidgator.net/file/63449560f65dd52fa5debeeaf1441282







BaDshaH вне форума   Ответить с цитированием
Старый 26.03.2019, 15:23   #6940
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию JetBrains IntelliJ IDEA Ultimate 2018.3.6



File size: 568 MB

Deep insight into your code. IntelliJ IDEA analyzes your code, looking for connections between symbols across all project files and languages. Using this information it provides indepth coding assistance, quick navigation, clever error analysis, and, of course, refactorings.

Features:
Smart completion
Ctrl+Shift+Space gives you a list of the most relevant symbols applicable in the current context. This and other completions are constantly learning from you, moving the members of the most frequently used classes and packages to the top of the suggestions list, so you can select them faster.

Chain completion
Digs a tad deeper than Smart Completion and lists applicable symbols accessible via methods or getters in the current context. Say you're looking for a value of Project and only have the Module module declaration. Press Ctrl+Shift+Space twice to get module.getProject() without any additional effort.

Static members completion
Lets you easily use static methods or constants. Offers a list of symbols matching your input and automatically adds required import statements.

Data flow analysis
When offering completion variants, IntelliJ IDEA analyses data flow to guess the possible runtime symbol type and refines choices based on that intel, automatically adding class casts.

Language injection
Brings coding assistance for a selected language to expressions and string literals in another one, complete with all advantages you would normally have. For example, you can inject fragments of SQL, XPath, HTML, CSS, or JavaScript code into Java String literals.

Cross-language refactorings
Knowing everything about usages of a symbol, IntelliJ IDEA offers extremely effective, thorough refactorings. For example, when you Rename a class within a JPA statement, it will update everything, from JPA entity class, to every JPA expression where it is used.

Detecting duplicates
Finds duplicate code fragments on the fly. Even if you're only about to extract a variable, constant, or a method, IntelliJ IDEA will let you know that there is a similar code fragment that can be replaced along with the one you're woking on.

Inspections and quick-fixes
Whenever IntelliJ IDEA detects that you're about to make a mistake, a little lightbulb pops up in the editor. Clicking it or pressing Alt+Enter opens a list of actions you can take to make things right.

Developer ergonomics
Every aspect of IntelliJ IDEA is designed with ergonomics in mind. IntelliJ IDEA is built on a principle that every minute a developer spends in the flow is a good minute, and things that break developers out of that flow are bad and should be avoided.

Built-in developer tools
To streamline your workflow, IntelliJ IDEA offers an unbeatable toolset right from the first start: decompiler, bytecode viewer, FTP and many more.

Polyglot experience
In addition to Java, IntelliJ IDEA offer/s first-class support for top JVM and non-JVM frameworks and languages out of the box.

Whats New
Код:
https://www.jetbrains.com/idea/whatsnew
HOMEPAGE
Код:
https://www.jetbrains.com/


Download From UploadGig

Код:
https://uploadgig.com/file/download/07d81957583f3073/BaDshaH_ideaIU-2018.3.6.rar
Download From Rapidgator

Код:
https://rapidgator.net/file/e43163966ff61bc832d18bb2461df8d4






BaDshaH вне форума   Ответить с цитированием
Старый 26.03.2019, 15:55   #6941
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию Nemetschek SCIA Engineer 2018 v18.1.3035



x86,x64 | Language:Multilanguage | File Size: 3.05 GB

SCIA Engineer 18 moves the software to the next level in terms of usability, material design and interoperability. We have enhanced usability with streamlined basic operations and more automatic workflows, improved integration into BIM workflows with upgraded Revit and Tekla links and added new design capabilities for advanced materials and construction systems. The first of the SCIA Engineer 18 webinars will give you a brief overview of all the major improvements.

Features:
-New default functionality settings to help you start a new project fast
-Automatic generation of code-based combinations
-Nonlinear combinations directly derived from linear combinations
-New 3D navigation control
-Simplified buckling settings
-Autodesign in composite design
-Steel fibre reinforced concrete design solution
-SIA 262:2013
-Extended capabilities of punching shear design
-New roundtrip link with Tekla Structures
-Extended Revit link
-and much more

System Requirements:
OS:Windows 7 SP1/8.1/10 (x86-x64)/Windows 2008/2012 Server (x64)
CPU: Min:Intel Core i5 or AMD equivalent / Recommended:Intel Core i7 or AMD equivalent
RAM:Minimum: 8 GB (Advised: 32 GB)
GPU:256 MB, supporting OpenGL
Free Disk Space:5GB
Resolution:1280 x 800 (4K Not supported)

Support:
SCIA Engineer 18 is compatible with:Revit 2018, Revit 2019
SCIA Engineer 18 is compatible with:Tekla Structures 2017
SCIA Engineer 18 is compatible with:Etabs 9.2
SCIA Engineer 18 is compatible with:IFC version 2x3
SCIA Engineer 18 is compatible with:SDNF version 2.0/SDNF version 3.0

WHATS NEW:
Release notes - SCIA Engineer 18.1 - patch 3:

-Modelling:Fix of usability of tributary area method.NNLL-AWDLHC Changes in FEM CRASH report Fixed
-Results in picture gallery showing all results instead of results according to plane
-Fixed available options in functionality dialog for 2D workspace
-Calculation:Fixed problem with calculation of empty Load cases
-Calculation:Fixed problem in property modifiers 1D
-A fix was implemented in the results so if the project is set to the 'v17' post-processing environment, the trapezoidal results now look consistent
-Modelling: Improve of speed of deleting LC in huge envelope combinations
-Calculation: Fixed problem with self weight in property modifier 2D
-The Integration area for Results integration is now properly defined
-Issue with Integration strips where in some cases same results has been incorrectly presented on all -strips with same results has been solved. Now results on Integration strips are presented correctly
-Fixed issue where reaction results were not working correctly for load combinations in some projects
-For General dynamics load cases were incorrectly displayed results of "deformed shape". This issue has been fixed.
-Fixed:Trajectory results are shown after changing form 'principal forces' to basic or design magnitudes
-Fixed:Trajectory results are shown after changing form 'principal forces' to basic or design magnitudes
-Fixed:XML document, resultant (v16) only showing coordinate
Fixed:Print picture feature not working
-Crash:Fixed issue where, when using Polish workspace, deleting tabs (with Red X) caused program to crash
-Fixed issue where results on named selection were not working as expected.
-Fixed issue where structure wasn't visible in steel service
-Fixed issue where Ctrl+C and Ctrl+V were not working in 'table edit geometry'
-Fixed issue where line grid could not be toggled off in certain projects.
-Displaying od surface for structural model is fixed
-Fixed issue in PPE16 where resultant reaction results did not respect activity selection
-Issue with Integration strips where in some cases same results has been incorrectly presented on all strips with same results has been solved. Now results on Integration strips are presented correctly.
-Combinations: mapping of the combinations used during Code switch was fixed.
-Issue with Integration strips where in some cases same results has been incorrectly presented on all strips with same results has been solved. Now results on Integration strips are presented correctly.
-Issue with Integration strips where in some cases same results has been incorrectly presented on all strips with same results has been solved. Now results on Integration strips are presented correctly.
-Fixed resultant of reactions differs from PPE16/17 when line supports are present (issue in PPE16 results)
-Fixed:Incorrect PPEv16 Results for 2d stress/strain (combination with master load case)
-Fixed:Integration strips - alignment changed in project from 17.1.2029 vs 18.0.60, this is not respected by OLD integration strip method
-Fixed issue where results on integration strips (in v17 post-processing environment) where displayed in incorrect direction
-Fixed issue where results on integration strips (in v17 post-processing environment) where displayed in incorrect direction
-Issue with Integration strips where in some cases same results has been incorrectly presented on all strips with same results has been solved. Now results on Integration strips are presented correctly.
-import of material from XML is fixed
-Cross-sections: Modified the centreline generation for the ' PI + L box' section to make sure all parts are properly connected 19
-Parameters: The issue with parameters when formula with reverse parameters was not updated after change of source CSS is fixed. Formulas in parameters are now correctly updated.
-Open Check:Snow load - Roof abutting and close to taller construction calculation of minimal value of mii is fixed.
-A problem in PPEv17 with tolerance of distance between 2 nodes is fixed.
The project is broken because materials are stored in project cache with wrong material diagram for nonlinear calculation without PGNL.
-There was a bug that cache was not cleaned when PGNL was switch on. This part is fixed.
-Crash was caused by the too long name of nonlinear combination. The name longer than 79 chars was enabled.
-There is really member with zero length.Check structure data will fix the issue. Crash during analysis of seismic load case was fixed
-Drawing of surface mesh refinement is fixed
-Import is not possible as import of reinforcement zones is not supported in XML. Currently a message identifying what elements makes the problem was added.
-Composite EC: Sheet welded sections are not supported for automatic design. Test for fabrication added everywhere, where is tested if design is running and warning message added.
-Composite EN:export of partial safety factors gamma implemented
-Composite: Solved a discrepancy between the Detailed and Graphical output
-Concrete: Fixed calculation of proper extreme value of checks in Section Check application / service for load class combining ULS+SLS combinations.
-The area of reinforcement for a column on bi-axial bending has been improved and corrected.
-Concrete:The rare issue with proper recognition of the shape of the rib was fixed. Only the rib, which is fully inside a slab, is replaced by rectangle section with bounding dimensions.
-Concrete EN + BS annex: When is used insufficient concrete class due to environmental class condition, the calculation of minimal and nominal cover is not printed.
-Concrete EN:Rare issue in shear check when concrete is not cracked, but tensile stress is high and reduction of concrete shear resistance by equation (12.5) leads to negative square root. When it happened, red NaN was visible in detailed output. Final result was not affected, "NaN" is handled as zero in looking for max shear resistance. Red NaN was fixed and square root is limited to positive numbers only.
-Concrete EN: In I.S. national annex limits for shear angle theta_min and theta_max were taken from the wrong item (with externally applied tension). It is now switched to the more common case without externally applied tension.
The following items have been fixed for stiffness presentation:
1) Header changed to reflect selection of short or long-term state
2) Precision of creep coeff has been changed
3) Calculation of curvatures for long-term load
4) Deflection calculated from the stiffness is corresponding to from curvatures.
-There is no distinguishing between characteristics and quasi-permanent forces in this check. These are considered the same in all cases.
-equation modified to /(eta-1) or /(eta+1), however force for compression is send as negative -> no final results are changed
Concrete buckling settings: an issue in the concrete buckling settings dialog in which the setting "height determination" set to input couldn't be saved has been fixed.
-Concrete:a typo in English has been fixed in the message when copying concrete attributes.
-Correction of detailing provisions strings in Design As 1D EHOU-B3EJQT
-The message related to torsion was updated EHOU-B4AA7E
-Swiss Concrete:Calculation of minimal clear distance was added to Detailed output of Design As 1D
-Swiss Concrete:The detailing provisions title is not presented at all in case detailing provisions are set OFF
Swiss Concrete:Exposure class has been added to detailed output during design As 1D
-Concrete: Holes in section are now visible also in concrete design EHOU-B4AB6E
-The message about switching off shear effect was added
-Swiss Concrete: Single headers about additional longitudinal forces from shear and torsion were removed from Standard output in Design As 1D
-Swiss Concrete: The message about warning related to updating of materials has been added during opening of project older than version 18.0
-SFRC: Limits were added for Fibre material characteristics
-Concrete EN: Type of value group is properly translated according used language
-System database for fibres has been updated
-Concrete:a default template of provided reinforcement is always set in case it's missing to avoid errors in reinforcement design procedure.
-Concrete: issue with freezing of 2D reinforcement design was fixed by optimizing of storing the results (reducing of size).
-Concrete:issue crash of 2D reinforcement design was fixed by optimizing of storing the results (reducing of size).
-Concrete 2D - EN:fixed issue with graphical presentation of provided reinforcement
-Concrete 2D: fixed and improved graphical presentation of provided reinforcement in design NNLL-B7LEME
-Concrete 2D - EN: presentation and sharing of info about effective depth was fixed in design of reinforcement and punching.
-Concrete EC - DIN: fixed calculation of vmin acc. to article 6.2.2(1) by adding the missed division by safety factor (gamma_c)
-Swiss Concrete: 2D reinforcement meshes are possible to input on structure under SIA code NNLL-B4HE7D
-Concrete Advanced: The issue with unsuccessful input of punching data on specific node due to problem in detection of slab geometry was fixed.

The following solution will be implemented for correction of this bug:
-the unity check, if shear reinforcement is designed will be set to 1,0 (vEd = Vrdcs)
-for finding extreme the value UC will be used but with taking into account Area of shear reinforcement, if unity check for more combinations and section is the same
-the unity check will be calculated according to old formulas UC = max (vEd/VRD,max; vEd/VRdcs)
-Concrete Adv.:Fixed unsuccessful input of punching data on specific node due to problem in detection of slab geometry.
-Concrete 2D - EN:fix missing results of punching design for a NL combination in case of using designed longitudinal reinf. as the input
-Concrete:Correction of determination angle theta for Singaporean
-Concrete:Concrete Advanced nonprestressed checks in construction stages are running just for Current selection
-Concrete:Maximum number of shear reinforcement cuts on member was limited to 10. The limit is increased to 100 cuts.
-Fixed issue where texts are not shown in the paper space.
-Fixed:In picture gallery, setting display mode 'Wired' for connections isn't kept when inserting into paperspace gallery
-3D-stress results:An issue in which the fibres where incorrectly connected of a general cross-section containing multiple opening has been resolved
-The problem with cached results for beams in structural model only layer is fixed
-The issue was caused by precision. A tolerance was introduced so all load on columns has the same direction
-Initial stresses:error message is displayed and calculation is aborted in case 'initial stress from member data' is selected in solver settings and no initial stress member data is defined in the project The problem was solved
-Modifications were done to the combinator to improve the speed in case of a high number of load cases
-The orthotropic member is not supported in new CDD. There is new warning added for the member with orthotropic model
-The problem was solved, there was problem in calculation stiffness for element with the normal force near to zero.
-The problem was solved
-Concrete: Crash during CDD in case of L and T ribs has been fixed
-The problem with empty load case for nonlinear calculation was solved, the program give warning during CDD calculation
-Handling with more nodal supports in one node during construction stages has been fixed
-An algorithm which says the name of particular load panel which is instable was implemented
-Issues with precision causing problem with tributary areas load generation are fixed
-Issue with line load generation on panel using Tributary areas method is fixed
-Issue with line load generation on panels using tributary areas method is fixed
-Issue with line load generation on panels using tributary areas method is fixed
-Sum of generated load from panels is fixed
-Modelling:Fix of problem with generation of tributary area method.
-Problem with imprecision of geometry where tributary areas were not generated is fixed.
-Error during 3D wind generation is fixed. However, panels LP5 and LP6 have complex geometry so some very small parts on their bottom are negligible.
-Error during 3D wind generation was fixed
-Steel EC-EN:Fixed a crash when using 'Moments in simple construction' together with 'Structural model only' members
-Steel EC-EN:Check Results are now purged properly when using Stability Member Data
-Steel cross-section classification: German translation updated in the classification output table because it contained an incorrect translation "LFK-klasse" replaced by "Klasse"
-Frilo LTBII: An issue has been fixed in which the 64-bit build of SCIA Engineer crashed when setting the LTBII member data property Type of analysis = "2nd Order analysis - according to code
-Steel EC-EN:An issue in the steel cold formed check for LTB is resolved by changing Lambda_LT,0 from 0.40 to 0.20 when applying article 6.3.2.2(4) of EN 1993-1-1.
Steel code check:an issue in which the steel code check reacts much slower when using seismic results has been fixed by caching the results after the first run.
-Steel AISC 360-16: Solved an issue in Chapter H3 of AISC 360-16 in case of angle sections
-Steel AISC 360-16: Solved an issue in Chapter H3 of AISC 360-16 in case of angle sections
-Steel AISC 360-16: Solved an issue in Chapter H1.1 of AISC 360-16 in case of angle sections
-Steel code check AISC: an issue in which different unity checks where displayed between the output and 3D-scene when running a linear + non-linear + stability calculation has been fixed.
-Connections EN: string fixed.
-Dynamics -Seismic - correct handling of signed seismic load cases in linear combinations for storey results
-Dynamics -Seismic - correct handling of signed seismic load cases in results that use new internal combinator (in this case, 2D internal forces)
-Dynamics - Seismic - improved handling of unsigned seismic load cases in linear combinations (not final solution yet)
-Dynamics - Seismic - Fixed calculation of rotational modal masses for general structures with Lanczos, Sub-space iteration and Polynomial methods
-Dynamics - Seismic - correct handling of accidental eccentricity load cases in LINEAR combinations (non-envelope)
Free HSS Connection Design: The issue with incorrect weld thickness in column HSS base plate in PASS condition was fixed. Proper w_tb is used.

HOMEPAGE
Код:
https://www.scia.net/


Download From UploadGig

Код:
https://uploadgig.com/file/download/488E052099325679/BaDshaH_Nemetschek.SCIA.Engineer.2018.18.1.3035.part1.rar
https://uploadgig.com/file/download/5fA1a065eA9e4f87/BaDshaH_Nemetschek.SCIA.Engineer.2018.18.1.3035.part2.rar
https://uploadgig.com/file/download/d5a45640DbcC8C20/BaDshaH_Nemetschek.SCIA.Engineer.2018.18.1.3035.part3.rar
https://uploadgig.com/file/download/aFa474b3619407ee/BaDshaH_Nemetschek.SCIA.Engineer.2018.18.1.3035.part4.rar
Download From Rapidgator

Код:
https://rapidgator.net/file/bf68143c56aef46050f1827cd7f944ac
https://rapidgator.net/file/0cc15d477ec0f1a4330bb47e93b1178f
https://rapidgator.net/file/35c15be1e24c6b538c644f16152d8b22
https://rapidgator.net/file/28416134ac0b13ae5d2b7815a532db39







BaDshaH вне форума   Ответить с цитированием
Старый 26.03.2019, 15:57   #6942
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию CompanionLink Professional 8.0.8036 Multilingual



File Size: 27 MB

CompanionLink Professional is a reliable application designed to facilitate the data synchronization between your preferred organizer program and a mobile phone. Alternatively, the program supports data transfer between various accounts, such as Google, Exchange or Office 365 Cloud.

Quickly set up the data transfer method
CompanionLink Professional allows you to instantly synchronize calendars or contacts from the specified accounts to your smartphone. The program supports PC applications or Web databases including ACT!, GoldMine (with dBase, SQL or Firebird), Google GroupWise, Highrise, Infusionsoft, IBM Lotus Notes or Microsoft Outlook.
Other transfer sources are Palm Desktop, Salesforce, SugarCRM, Time & Chaos and Zoho. The synchronization is performed only in one direction, from one of the above-mentioned instances to a mobile device or another service.
The supported destinations include Android phones, Apple devices, BlackBerry, webOS devices, Palm Handheld, Windows Phones and various accounts. You can transfer data to DejaCloud, Google, Lotus Notes, Microsoft Outlook, Palm Desktop, Outlook.com, Exchange or Office 365 Cloud.

Change configuration details and start the transfer
CompanionLink Professional allows you to select the transfer method, in case you send data to mobile devices. You can choose to perform the sync through DejaCloud, direct USB connection, via Google, DejaConnect USB, Local Wi-Fi or Bluetooth.
Be sure to enter the login credentials for the accounts, services or databases you are using, if required, for the transfer to be quickly performed. You can create several sync profiles, in order to facilitate future data transfers. Moreover, you can easily enable the two-way synchronization.

User-friendly data transfer application
With its light graphic interface, CompanionLink Professional is a reliable and simple to setup utility, for any type of users. You need to ensure the required connection type between the PC and the mobile device and provide the authentication details, then start the process with one mouse click. Moreover, the program allows you to manually configure additional sync categories.

Use CompanionLink if you need:
- Special Folder support in Outlook
- Colored Categories on your Phone Calendar
- PC-Side sync for Corporate Data (Act! IBM Notes, Groupwise)
- Special Security Needs (HIPAA, Blackphone)
- US Based Telephone Tech Support

Outlook Android Sync
Android Sync via USB, Wi-Fi, DejaCloud from PC or Mac for standalone Outlook, Exchange and Office 365

Outlook iPhone Sync
iPhone and iPad Sync via USB, Wi-Fi, DejaCloud from PC or Mac for Outlook, Exchange and Office 365

Google Calendar Sync
Sync Google Calendar, Contacts and Tasks with Outlook, Act!, IBM Notes, Palm Desktops

Outlook for Mac Sync
Outlook for Mac 2011, Outlook for Mac 2015 - Sync to Google, iPhone and Android

Act! Sync
Sync Sage Act! and Symantec ACT! - Activities, Contacts, History

Time & Chaos Sync
USB, Wi-Fi, DejaCloud Sync

Business Contact Manager
Accounts, Tasks, Projects

IBM Notes Sync
Standalone Lotus Notes Sync

Novell Groupwise Sync
Standalone Groupwise Sync

Palm Desktop Sync
USB, Wi-Fi, DejaCloud Sync from PC

BlackBerry
BB10, Original, BB Android

Windows Phone 7, 8 Sync
Sync to Lumia Phones

Windows 10 Mobile Sync
Sync to W10 Mobile Phones

Phone Companion that Works
Windows 10 integration with Microsoft Outlook fields that no one else handles. Task priorities, birthdays, "File-As" field, sort options, and category colors that match Outlook.

USB, WiFi, Cloud sync
]You choose how to sync data. Get unparalleled data security with USB. Cloud automates sync across all your devices. WiFi uses your home/office network when you are in range.

RELEASE NOTES:
Код:
https://www.companionlink.com/support/kb/CompanionLink_Release_Notes
HOMEPAGE
Код:
http://www.companionlink.com


Download From UploadGig

Код:
https://uploadgig.com/file/download/98B31Ccf62268722/BaDshaH_CompanionLink.8.0.rar
Download From Rapidgator

Код:
https://rapidgator.net/file/c1767257a9cc969b092e8c3b7b04b495






BaDshaH вне форума   Ответить с цитированием
Старый 27.03.2019, 13:52   #6943
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию Abyssmedia Audio Converter Plus 6.1.0.0



File size: 5.5 MB

Abyssmedia Audio Converter Plus is a powerful, professional solution designed for converting the most popular audio formats and Audio CD tracks directly into MP3, WMA, OGG, AMR, FLAC, APE or WAV formats. High-quality 32-bit converter engine guarantee performance boost on multi-core CPU and allows precision sample rate conversion. Converter can process 24-bit and 32-bit WAV files for DVD Audio mastering. Integration with Windows Explorer enables easy conversion for entrie folders. Just add audio files, select output folder and format and you are ready to convert them in one click.

Main Benefits:
Performance optimizations for multi-core CPUs from Intel and AMD
Import Audio Files from Playlists (M3U, PLS)
Keep directory structure during conversion
Transfer audio tags during conversion
Retain the original file creation time
Analyze volume and apply gain to the output files (normalization).
High precision sampling rate conversion between 8000Hz, 11025Hz, 16000Hz, 22050Hz, 32000Hz, 44100Hz, 48000Hz amd 96000Hz
High quality conversion between 8 bit, 16 bit, 24 bit, 32 bit(integer) and 32 bit(IEEE floating point)
Allows you to create CD compatible WAV files so you can burn them on a CD.
Shell Integration: By simply right clicking a file, folder or a group of files, you can start the conversion process from Windows Explorer.
Support Drag and Drop: You can convert files or folders by dragging and dropping them onto the software's desktop icon or main window.
Batch conversion: You can convert many files in one batch regardless of their source formats.
Allows you to convert entire folders and sub-folders
Close integration with other audio tools like sound recorder and sound editor
Compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10

Input audio formats:
MPEG Audio (MP3, MP4, M4A), Windows Media Audio (WMA), OGG Vorbis (OGG), Monkey's Audio (APE, MAC), FLAC Audio (FLAC), MusePack (MPC, MPP, MP+), NTT TwinVQ (VQF), WAV PCM Audio (WAV), Portable Voice Format (PVF), Creative VOC (VOC), Commodore Amiga Audio (IFF, SVX), Sun/Next SND (SND, AU), AIFF (AIFF), WavPack Files (WV), Speex (SPX), CRI ADX (ADX), TrueAudio (TTA), OptimFrog (OFR), Advanced Audio Coding (AAC), GSM Audio (GSM), Apple CAF (CAF), Ensoniq Paris Audio (PAF), Audio CD Tracks (CDA), OGG Opus (OPUS).

Output audio formats:
MP3, M4A, WMA, OGG, AMR, FLAC, APE, WAV

Whats New
Код:
http://www.abyssmedia.com/audioconverter/history.shtml
HOMEPAGE
Код:
http://www.abyssmedia.com/


Download From UploadGig

Код:
https://uploadgig.com/file/download/5C6992c1ba5fe613/BaDshaH_Audio_Converter_Plus_6.1.0.0.rar
Download From Rapidgator

Код:
https://rapidgator.net/file/239e757d840e6a0751541f59ef8292e6






BaDshaH вне форума   Ответить с цитированием
Старый 27.03.2019, 13:52   #6944
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию Abyssmedia AudioRetoucher 4.9.5.0 + Portable



File Size: 19.35 MB

AudioRetoucher is an music transposition tool that changes the pitch and tempo of an audio composition. With AudioRetoucher the sound of an instrument or voice might be modified slightly, to make a vocalist or instrumentalist's job easier in dealing with difficult keys, and usually involves no more than a half-step (semitone) or possibly whole step (whole tone) change. Vocal pitch may also be speeded up to "smooth out" a performance, or to make the singer sound younger. It may be used for special effects like famous Chipmunks recordings were created by recording vocal tracks at a slow speed, then boosting them to normal at playback.

AudioRetoucher mainly used by musicians as MP3 key shifter, but it also can detect BPM values for MP3 files and adjust tempo in real time.

AudioRetoucher Main Features:
Karaoke MP3+G support - if you have CDG file for your audio track then graphics part of the song will be adjusted so the lyrics are in sync with music after changing Tempo and Speed.
Support for MP3, M4A, WMA, FLAC, OGG, AIFF and WAV files
Change Speed - filter to change both Speed and Pitch of audio file.
Change Pitch - filter to increase or decrease the Key of an audio file in semitones (from -6 to +6 semitone with 0.1 step) without changing the Tempo. Used to change the key of a song.
Change Tempo - filter to increase or decrease the Tempo in percents without changing the Pitch(Key). Used to slow down music
Bass Boost - filter to Amplify Low Frequencys of audio file.
Treble Enhancer - filter to Amplify High Frequencys of audio file.
BPM detector - count song's Beats Per Minute.
Super fast processing speed provided as it full supports Intel Core2 Processor and AMD Phenom Processor which ensures full use of your CPU.
Keeps ID3 tags after processing
Easy to use as all settings are displayed in the interface which are easy to handle.

Lifetime free upgrades
Supported OS: Windows Vista, Windows 7, Windows 8, Windows 10

AudioRetoucher Applications:
Transpose music.
Time stretching.
Pitch shifting.
DJs can use AudioRetoucher to make the music tempo suitable for dancing.
Singers can change the key of backing track to match the voice.
Dictation and Transcription tasks
Funny sound effects
...and much more

Whats New
Код:
http://www.abyssmedia.com/audioretoucher/history.shtml
HOMEPAGE
Код:
http://www.abyssmedia.com


Download From UploadGig

Код:
https://uploadgig.com/file/download/319f3238cca01c16/BaDshaH_AudioRetoucher.4.9.5.0.rar
Download From Rapidgator

Код:
https://rapidgator.net/file/2eea6bc21ac63c66288248db9841a044






BaDshaH вне форума   Ответить с цитированием
Старый 27.03.2019, 13:53   #6945
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию Adobe Audition CC 2019 v12.1.0.180 Multilingual



Languages: Multilingual | File Size: 489.75 MB

Adobe Audition CC. A professional audio workstation. Create, mix, and design sound effects with the industry's best digital audio editing software. Audition CC is a comprehensive toolset that includes multitrack, waveform, and spectral display for creating, mixing, editing, and restoring audio content. This powerful audio workstation is designed to accelerate video production workflows and audio finishing - and deliver a polished mix with pristine sound.

What is Audition CC?
Meet the industry's best audio cleanup, restoration, and precision editing tool for video, podcasting, and sound effect design.

Record, edit, and integrate music clips.
This step-by-step tutorial guides you through the robust audio toolkit that is Adobe Audition, including its seamless workflow with Adobe Premiere Pro CC.

Add oomph to your audio.
Use the Essential Sound panel to achieve professional-quality audio - even if you're not a professional.

Create a podcast
Learn the basic steps to record, mix, and export audio content for a podcast - or any other audio project.

Remix to fit
Easily and automatically rearrange any song to fit any duration with Remix in Audition CC.

Repair and restore
Get best practices for fixing audio, including how to use the spectral frequency display, Diagnostics panel, effects, and more.

What's New in Audition CC 2019:

DeReverb & DeNoise effects [NEW]
Reduce or remove reverb and background noise from recordings without noise prints or complicated parameters with these efficient real-time effects or through the Essential Sound panel.

Improved playback and recording performance [NEW]
Playback over 128 audio tracks or record over 32 tracks, at low latencies, on common workstations and without expensive, proprietary, single-purpose acceleration hardware.

Improved multitrack UI [NEW]
Playback over 128 audio tracks or record over 32 tracks, at low latencies, on common workstations and without expensive, proprietary, single-purpose acceleration hardware.

On-clip gain control and waveform scaling [NEW]
Adjust your audio without moving your eyes or mouse cursor away from your content with on-clip gain adjustments. Use your eyes and ears to match clip loudness to neighboring clips with a waveform that smoothly scales in real-time to amplitude adjustments.

Add tracks and delete empty tracks [NEW]
Quickly add multiple audio or bus tracks of any channelization at once, or clean up all unused audio tracks in a session, with these commands.

Zoom to time [NEW]
Zoom to specific durations with customizable presets. No more guesswork or small adjustments needed to see an exact length of time.

Effects and presets migration [NEW]
When upgrading, Audition can import all 3rd party effects already scanned by a previous version of Audition, as well as custom effect presets and more.

Open Premiere Pro projects
Open native Premiere Pro projects from the Audition Media Browser and select the sequences you want to work on for a simpler, more efficient audio editing workflow.

Clip spotting
Video previews in Audition update in real-time when clips are added, moved, or trimmed, always showing the users the correct frame for accurately-timed edits, sound effects, and more.

Tracks panel
Use the Track panel to show or hide tracks, or groups of tracks, so you can focus on specific parts of your project. Create your own preferred track groups and save presets for an efficient, personalized multitrack editing experience.

Compound media import
Twirl down compound media files to choose the audio and video tracks you want to work on, or simply import entire compound files, including container formats like MXF.

Improved multitrack performance
Scroll through multitrack projects faster and more smoothly. Track heights are maintained when zooming in or out, making it easier to manage large projects, especially on smaller screens.

Auto-Duck music
While working on a project, automatically generate a volume envelope to duck music behind dialogue, sound effects, or any other audio clip using the Ducking parameter in the Essential Sound panel. Powered by Adobe Sensei, this feature simplifies the steps needed to achieve professional-sounding audio mixes.

Run scripts
Browse and run scripts within Audition or via the command line to automate application functions, like loudness normalization, QC validation, and others. Streamline common tasks, including third-party integrations, and bring a new level of efficiency to your audio work.

Add album art in MP3 files
Creating modern podcasts and albums in Audition just got easier. With support for .jpeg and .png files, you can embed thumbnails and images into your .mp3 files.

Jump to Time
Navigate to any spot in the timeline with this useful keyboard shortcut. Save time and keep your workflow moving.

Input monitoring
Input monitoring allows you to preview the input coming from your recording device before starting the actual recording by either observing the level meters or listening to it.

Multitrack clip improvements
When recording punch-ins or layering sounds, clip Z-order is maintained when selecting stacked clips so that smaller clips don't get lost behind longer ones. Commands in the clip content menu make it easy to move clips to the front or back, and preferences allow users to customize the behavior. More improvements allow for symmetrical clip fades, or adjusting fade curves or duration independently.

Support for Mackie HUI devices
Audition CC includes support for the Mackie HUI control surface protocol. To control your mix, transport, and automation in Audition, use HUI emulation mode with almost all modern control surfaces..

Dynamics effect
This modern version of the classic replaces the Adobe Premiere Pro Dynamics audio effect in Premiere Pro and Audition CC. This simple yet powerful plug-in offers a compressor, expander, limiter, and noise gate in one easy-to-use tool.

Visual keyboard shortcut editor
Use the Visual Keyboard Shortcut Editor to see which keys have been assigned shortcuts and which are available for assignment. A tooltip reveals the full command name when you hover over a key in the Keyboard layout. When you select a modifier key on the keyboard layout, the keyboard displays all the shortcuts that require the modifier.

Timecode overlay
Audition CC lets you view session and media timecode overlays in the Video panel. You can also lock your video output to your external display. The timecode overlay displays the current time display string as an overlay on the Video panel and the video fullscreen monitor.

Multichannel audio workflows
Multichannel audio workflows allow you to separate all audio channels to unique clips automatically. You can customize the channels assigned to a clip and adjust Specific Channel Routing.

Full fidelity with Premiere Pro
Audition support for native Premiere Pro projects means links to original assets, sequence metadata, markers, audio effects, parameters, sub-mixes and Essential Sound panel settings are transferred to Audition with full fidelity.

Direct export from Audition with Media Encoder
Audition can export your edited audio directly to Adobe Media Encoder CC. This feature enables a fully linear post-production workflow, using format presets and audio channel customization without rendering or wrangling various mixdown files.

Updated audio effects
Many existing audio effects have spectrum meters, gain meters, and gain reduction meters. You can use the frequency spectrum to identify imbalances in audio and use control points to correct them. Level Meter shows the input level of the audio, and Gain Reduction Meter shows how audio signals are compressed or expanded.

Guides for getting started
In-app tutorials offer new users a series of guided walkthroughs of common tasks. These guides help you navigate the core functionality and capabilities with ease, including reducing background noise, mixing audio elements, and producing a simple podcast. Coach marks and concise tutorials are offered inside the application to help you get started with Audition.

Essential Sound panel
The Essential Sound panel gives you a complete toolset to mix your audio and achieve professional-quality output. The panel provides simple controls to unify volume levels, repair sound, improve clarity, and add special effects - so your video projects sound like a professional audio engineer has mixed them. You can save the applied adjustments as presets for reuse in Audition, making them handy for more audio refinements.

CEP extensions
You can enable Common Extensibility Platform (CEP) extensions and build integrated panels in Adobe desktop applications.

Remixing and adjusting song duration
Create remixes of music files from a collection using Adobe Sensei's machine learning. For example, you can take a song that has a longer duration and create a shorter version that still sounds like the original. You can recompose any piece of music in your collection to fit the video or project duration.

Synthesized speech
Type or paste text, and generate a realistic voiceover or narration track. Use this tool to create synthesized voices for videos, games, and audio productions.

Automatic loudness correction
Match loudness in audio clips, and apply correction to support various loudness standards and true peak limiting. The Match Loudness panel replaces the old Match Volume panel.

Auto-backup to Creative Cloud
Audition lets you store periodic backups of your session files to prevent any loss due to power failure, crash, or file corruption. In the Preferences dialog box, choose Auto Save and select Backup Multitrack Session Files Automatically. Then, choose a backup location that can be your Adobe Creative Cloud storage environment, the session folder, or any other location of your choice.

Dynamic Link for streaming video content from Premiere Pro
The Dynamic Link video streaming feature lets you stream video without rendering when sending projects from Premiere Pro to Audition.

Live relinking
Audition lets you easily replace assets within an open project. Any edits made to the original clip are retained and applied to the new material so you can work uninterrupted even when an asset changes.

Dual display full-screen video
Get the most out of your editing experience in Audition by using a full-screen dual-monitor workflow. Display the contents of your video panel full-screen on a secondary monitor using HDMI, DVI, or VGA. This feature is especially useful for editing Foley and sound effects to video, recording automated dialog replacement (ADR) or voiceovers, and displaying your work as you edit.

Expanded video format support
Premiere Pro CC offers extensive native media support, letting you edit all the major video, image, and audio formats natively. The 2014.1 release of Audition CC supports all the native video formats that are supported in Premiere Pro.

Marker import and export
Audition can import markers from any file containing XMP marker metadata, including video files from Premiere Pro and Adobe Prelude CC. You can import markers into either an audio file (displayed in the Waveform editor) or a multitrack composition in Audition. You can share these markers with third-party applications by exporting the markers to a CSV file using the Markers panel. At any point, you can import the CSV markers file back into Audition.

Automatic copying of imported assets to a session folder
Audition lets you set custom levels for Yellow (Caution) and Red (Warning) indicators in the Level Meters panel. You can conform to station regulations or personal preferences by selecting custom values for level meter crossover points. In the Preferences dialog box, select Playback and specify the Yellow and Red levels.

Timed recordings
Schedule recordings in advance and Audition will capture them automatically, or start recording immediately for a specified duration.

Sound Remover effect
The Sound Remover effect removes unwanted audio sources from a recording. This effect analyzes a selected portion of the recording and builds a sound model, which is used to find and remove the sound.

Enhanced Speech Volume Leveler
The Target Dynamic Range option in Audition provides better control over volume leveling for spoken content.

iXML metadata support
Audition can read, modify, and generate iXML metadata. This metadata is typically captured by audio recording devices or on-location audio recording software such as Metacorder for Mac. Important features of iXML metadata are the ability to select and mark the best takes, and to record on-set notes.

Custom channelization
To support different surround formats and configurations, Audition lets you add new custom audio channels when you create an audio file. Custom channels are typically used in audio for cinema, broadcast, and video games.

Smart track colors
To make it easier to identify tracks, a color bar is added to the tracks. These color bars are added on the left of the track header, or at the bottom in the mixer panel. When you add a clip to a track, the clip color changes to match that of the track.

Pitch Bender and Pitch Shifter effects
Use the Pitch Bender effect to change the tempo over time to vary the pitch. The effect uses a keyframe edit envelope laid across the entire waveform, similar to the Fade and Gain Envelope effects. Use the Pitch Shifter effect to change the musical pitch. It's a real-time effect that can be combined with other effects in the mastering rack or the effects rack.

Click/Pop Eliminator and DeClicker effects
Use the Click/Pop Eliminator and DeClicker effects to remove microphone pops, clicks, light hiss, and crackles. Such noise is common on recordings such as old vinyl records and on-location recordings.

ITU Loudness Meter
Audition has an integrated, customized version of the TC Electronic Loudness Radar meter plug-in. Available in both the waveform and multitrack views, it provides you with information about peak, average, and range levels.

Automatic speech alignment
To quickly align overdubbed dialogue with original production audio, use automatic speech alignment. Audition matches the timing of each word, even if the original audio is noisy or differs in overall length.

Preview editor
See in real time how the waveform looks before you apply changes. Or work on separate regions of a file simultaneously. This functionality is especially valuable when you're working with effects that alter the duration of a clip. Choose View > Show Preview Editor to display the preview.

Frequency band splitter
Use Frequency Band Splitter to take one audio clip (or a selection in a clip) and make up to eight copies, where each copy contains a different frequency range found in the original clip. The crossover frequencies determine the split points. Each copy of the waveform is created as a new file and placed in the Files panel. You can then edit or apply effects to each band separately.

Waveform editing with Spectral Frequency Display
Easily add, remove, and invert spectral selections made using the marquee, lasso, or paintbrush selection tools.

Audio extraction from CDs
Extract selected CD tracks to a single file. Insert an audio CD into an optical drive, and choose File > Extract Audio from CD. Select the tracks and enable Extract to Single File.

Paste control for multitrack sessions
Control paste operations in a multitrack session: You can choose to paste all clips in the same targeted track, or in multiple tracks. Press Alt while dragging to toggle. You can specify the default behavior in the Multitrack Clip preferences. When enabled, a new preference avoids overlapping clips when inserting or pasting new clips creates new tracks.

Phase Analysis panel
Use the Phase Analysis panel to reveal out-of-phase channels for stereo waveforms. The Phase Analysis panel also shows stereo separation. You can choose from several phase views, including Histogram, Mid/Side, Lissajous, and Phase Wheel. For additional display options, right-click the graph and choose an option.

Edit Favorites feature
Use the Favorites panel to record, view, organize, run, or edit your favorite tasks. To display the Favorites panel, choose Window > Favorites or Favorites > Edit Favorites.

Manual and automatic pitch controls
The Manual Pitch Correction effect lets you visually adjust pitch with the Spectral Pitch Display. The Spectral Pitch Display shows the fundamental pitch as a bright blue line, and overtones in yellow to red hues. Corrected pitch appears as a bright green line. The Automatic Pitch Correction effect is available in both the Waveform and Multitrack editors. In the latter, its parameters can be automated over time using keyframes and external control surfaces.

Faster, more precise editing
Select multiple clips and choose Clip > Groups > Group Clips. You can move and edit grouped clips together, and even stretch them proportionately when clip stretching is enabled. Group stretch, gain, color, and other settings are available in the Properties panel.

Real-time clip stretching
Quickly stretch clips to the necessary length, while previewing the results during playback. In the Editor panel, select multiple clips to stretch them proportionately. In the Properties panel, choose from a variety of stretch types optimized for different audio content.

Control surface support and parameter automation
Mix audio interactively with popular control surfaces using the EUCON, Mackie MCU, or Logic Control protocols (including the Avid Artist series formerly made by Euphonix). Or use third-party, tablet-based controllers that support these protocols. You can even use multiple devices simultaneously.

System Requirements:
- Processor: Multicore processor with 64-bit support
- Operating system: Microsoft® Windows 10 (64 bit) version 1703 or higher.
- RAM: 4GB of RAM
- Hard disk space: 4GB of available hard-disk space for installation; plus additional free space required during installation (cannot install on removable flash storage devices)
- Monitor resolution: 1920x1080 or larger display
- OpenGL: OpenGL 2.0 capable system
- Sound card: Sound card compatible with ASIO protocol, WASAPI, or Microsoft WDM/MME
- Control surface support : USB interface and/or MIDI interface may be required for external control surface support (see manufacturer's specifications for your device)
- CD burning: Optical drive is used for CD burning (optional)

Language versions available for Audition CC:
- French, German, Japanese, Italian, Spanish, Portuguese, Simplified Chinese, Korean

SCREENSHOTS
[Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]

HOMEPAGE
Код:
https://www.adobe.com


Download From UploadGig

Код:
https://uploadgig.com/file/download/b679B1e576453945/BaDshaH_AU121.rar
Download From Rapidgator

Код:
https://rapidgator.net/file/2491cfdcce73ded137e1bcc25a044964






BaDshaH вне форума   Ответить с цитированием
Ответ

Любые журналы Актион-МЦФЭР регулярно !!! Пишите https://www.nado.in/private.php?do=newpm&u=12191 или на электронный адрес pantera@nado.ws


Здесь присутствуют: 4 (пользователей: 0 , гостей: 4)
 
Опции темы

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход

Похожие темы
Тема Автор Раздел Ответов Последнее сообщение
Schlumberger Groundwater Software 2014.2 lasavn Различный софт 0 21.04.2015 03:54
Schlumberger Groundwater Software 2014.2 lasavn Различный софт 0 18.04.2015 04:28
Schlumberger Groundwater Software 2014.2 lasavn Различный софт 0 15.04.2015 05:11
Schlumberger Groundwater Software 2014.2 lasavn Различный софт 0 12.04.2015 05:36
TrueCafe Internet Cafe Software 6.0.1304.10 Multilingual sonaslan_1989 Различный софт 0 09.04.2015 18:40


Текущее время: 14:27. Часовой пояс GMT +1.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc. Перевод: zCarot