Старый 28.05.2020, 15:47   #481
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение Active Partition Recovery Ultimate 20.0.2

Active Partition Recovery Ultimate 20.0.2






Active Partition Recovery Ultimate 20.0.2 | 975 MB


Active@ Partition Recovery helps you to recover deleted and damaged logical drives and partitions under Windows, WinPE (recovery BootDisk), Linux (recovery LiveCD) & DOS environments. Simple QuickScan easily detects and recovers recently deleted partitions, as long as they were not formatted / overwritten to after deletion. Advanced low-level SuperScan may detect partitions which were deleted a long time ago, even if you have created new ones and even formatted them. Last Chance recovery method detects & recovers files by their signatures on volumes having severely damaged file systems, where physical volume recovery isn't possible! Recovers NTFS/ReFS, FAT/exFAT.


Active@ Partition Recovery toolkit includes the following main features:
Restores lost partitions & disks back to working state
QuickScan easily detects partitions being deleted but not re-formatted
SuperScan - low-level scan detects re-formatted & damaged partitions
Last Chance - recovery method for severely damaged filesystems on volumes
Backup & Restore disk partitioning info and ability to Rollback changes
Fixes damaged Partition Table, MBR (Master Boot Record) and GPT
Creates a Disk Image - sector-by-sector data backup for data recovery
Restores all data from raw, compressed and VMWare Disk Images
Supports Windows 10, 8, 7, Vista & XP; Servers 2003, 2008, 2012 & 2016
Recovers FAT/exFAT/NTFS/ReFS/HFS+/UFS/Ext2/Ext3/Ext4/BtrFS/XFS/JFS
Recovers IDE, SATA, eSATA, SSD, SCSI, RAID, USB Flash Disks and Memory Cards
Recovers volumes lost due to accidental disk formatting, volume deletion, damage by virus or malware attack, a power failure and much more...
Active@ Partition Recovery Ultimate is an ultimate data recovery tool set. In addition to Professional features, it contains a bootable ISO Image (WinPE based Active@ Boot Disk Lite) that you can burn to a CD-ROM or write to a USB Flash drive and boot Windows from this CD-ROM/USB to recover partitions (including the system ones) as well as to recover particular files and folders from within the familiar Windows environment. Ultimate edition includes also Linux-based bootable Active@ LiveCD (Linux recovery environment) being able to boot all the latest x86 & x64 UEFI secure boot systems as well as standard BIOS. Universal bootable disk creator prepares DOS, Windows or Linux boot disks for any type of media (CD/DVD/BD/USB). Ultimate version also includes the Active@ File Recovery - tool to recover deleted files, files on damaged partitions and to reconstruct damaged RAID disk arrays. Active@ File Recovery allows you to save particular files in case of unsuccessful partition recovery (for example, the file system itself is severely damaged).

What's new in version 19:
Improved NTFS recovery on volumes located in Windows Storage Spaces
Improved recovery of disks having 4KB (4096 bytes) sector size
Redesigned and improved Registration & Welcome Screen
Latest Recovery Kernel including many improvements & bug fixes
Improved software stability working with failing disks
Implemented more pre-defined algorithms for file signatures recognition:
Canon Raw Image File (CR3)
Finale Notation File (MUSX)
Ultimate version: Active@ Boot Disk Lite upgraded to WinPE based on the latest Windows 10 build 1903
Ultimate version: Included the latest Active@ File Recovery 19
Ultimate version: Active@ Boot Disk now fully supports SATA & PCI-E NVMe M.2 disks

Requirements:
Personal Computer
IBM PC/AT compatible CPU
Video must be VGA or better resolution (800 x 600)
Intel 286 or higher for DOS version
640 Kb of RAM for DOS version
Intel Pentium processor or higher for Windows version
128 Mb of RAM for Windows version
Drive Storage System
CD/DVD/Blu-ray or USB storage device to boot from (in case of unbootable systems)
Hard Disk Drive type IDE, SATA, eSATA, External USB, SSD, SAS or SCSI with controllers
Memory Cards of type SD, MMC, CompactFlash, MemoryStick, ... as well as any USB Flash Disks
Windows-based Boot Disk Requirements
IBM PC/AT compatible CPU
Video must be VGA or better resolution (800 x 600)
Intel Pentium processor or higher
512 Mb of RAM
CD/DVD/Blu-ray drive or USB port to boot from
Linux-based Boot Disk (LiveCD) Requirements
IBM PC/AT compatible CPU
Video must be VGA or better resolution (800 x 600)
Intel Pentium processor or higher
1 Gb of RAM
CD/DVD/Blu-ray drive or USB port to boot from.

Home Page -
Код:
https://www.partition-recovery.com/

DOWNLOAD LINKS:

Код:
https://rapidgator.net/file/a08ddd1d7bdcf64fdfb95d937600d903/Active_Partition_Recovery_Ultimate_20.0.2.rar
Код:
http://nitroflare.com/view/75C61CD2E08C926/Active_Partition_Recovery_Ultimate_20.0.2.rar
Код:
https://uploadgig.com/file/download/3d79569b184D97bB/Active_Partition_Recovery_Ultimate_20.0.2.rar
KAMAL вне форума   Ответить с цитированием
Старый 28.05.2020, 15:53   #482
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение Adobe Acrobat Pro DC 2020.009.20065 Multilingual

Adobe Acrobat Pro DC 2020.009.20065 Multilingual






Adobe Acrobat Pro DC 2020.009.20065 Multilingual | 966 MB


Adobe Acrobat Pro DC is the leading PDF converter and much more. Adobe Acrobat Pro DC software lets you deliver professional PDF communications. It's packed with smart tools that give you even more power to communicate. Create and edit PDF files with rich media included, share information more securely, and gather feedback more efficiently.


Adobe Acrobat Pro DC software is the advanced way for business professionals to create, combine, control, and deliver more secure, high-quality Adobe PDF documents for easy, more secure distribution, collaboration, and data collection.

Assemble electronic or paper files into reliable PDF documents that are easy to share with others using free Adobe Reader. You can assemble even Web sites, engineering drawings, and e-mail.

With Adobe Acrobat Pro DC you can manage document reviews, synthesizing feedback from multiple reviewers while preserving document format and integrity. Extend commenting capabilities to anyone using Adobe Reader. Windows users can design intelligent Adobe PDF forms that include business logic, such as calculations and data validations, to help increase the accuracy of data collection while reducing the costs of manual data entry.

Use Adobe Acrobat Pro DC to create high-impact PDF communications, collaborate more easily, and streamline reviews. Adobe Acrobat Dynamic PDF helps you get more done - easier, faster, better.

Edit PDF files
With Adobe Acrobat Pro DC, you can make minor edits to text and images right in your PDF file without requiring the original document or graphic. Edit text in a PDF. Fix a typo, change a font, or add a paragraph to your PDF as easily as you do in other applications using a new point-and-click interface. Edit images in a PDF. Resize, replace, and adjust images in your PDF with no need to track down the original file or graphic.

Export from PDF files
Reduce the time you spend retyping information stuck in PDF files. Convert PDF files to editable Microsoft Office documents. And save fonts, formatting, and effort.
Convert PDF files to Word. Save your PDF as a Microsoft Word document and take your fonts, formatting, and layouts with you. Convert PDF files to Excel. Turn your PDF or just part of it into an editable Excel spreadsheet you can use for data analysis right away. Convert PDF files to PowerPoint. Get a head start on new projects by saving a PDF file as a fully editable PowerPoint presentation.

Create PDF files
Stop worrying about whether the files you send will look right on other people's screens. Turn documents into PDF files anyone can reliably view with free Adobe Reader.
Convert Word, Excel, or PowerPoint to PDF. Right from your Office application in Windows, you can create PDFs, start a shared review, restrict PDF edits, and more. Print to PDF. Convert files to PDF from virtually any application that prints simply by selecting Adobe PDF as your printer. Scan to PDF. When you need to turn a paper document or form into a digital file, just scan it to create a searchable PDF file you can edit. Convert HTML pages to PDF. Save web pages as PDF files to archive web content, review the pages offline, or print them more reliably.

Create and analyze forms
Cut the time you spend creating forms, rekeying data, and correcting errors. Distribute forms online, and then collect responses and analyze results in real time.
Create new PDF and web forms. Customize professional templates or design from scratch with the Adobe FormsCentral desktop app included in Adobe Acrobat Pro DC. Collect form responses with FormsCentral. Easily collect responses by moving your PDF or web forms online with the Adobe FormsCentral online service. Convert existing forms to fillable PDFs. Type less, gather more. Quickly convert your paper, Word, or Excel forms to fillable PDF forms. Collect form responses using Adobe Acrobat tools. Compile returned forms into one PDF, or host forms using a network folder or Microsoft SharePoint server.

System Requirements:
1.5GHz or faster processor
Windows Server 2008 R2 (64 bit), 2012 (64 bit), 2012 R2 (64 bit), or 2016 (64 bit); Windows 7 (32 bit and 64 bit), Windows 8, 8.1 (32 bit and 64 bit), or Windows 10 (32 bit and 64 bit)
1GB of RAM
4.5GB of available hard-disk space
1024x768 screen resolution
Internet Explorer 11; Firefox (ESR); or Chrome
Video hardware acceleration (optional)


Home Page -
Код:
http://www.adobe.com/


DOWNLOAD LINKS:

Код:
https://rapidgator.net/file/cd661fe52ef31e9eb37690281d0091f4/Adobe_Acrobat_Pro_DC_2020.009.20065_Multilingual.rar
Код:
http://nitroflare.com/view/F1C7D4BEB8EEF4D/Adobe_Acrobat_Pro_DC_2020.009.20065_Multilingual.rar
Код:
https://uploadgig.com/file/download/4b3433c46b662b53/Adobe_Acrobat_Pro_DC_2020.009.20065_Multilingual.rar
KAMAL вне форума   Ответить с цитированием
Старый 28.05.2020, 16:02   #483
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение ARES Commander 2020.1 Build 20.1.1.2024 (x64) Multilingual

ARES Commander 2020.1 Build 20.1.1.2024 (x64) Multilingual






ARES Commander 2020.1 Build 20.1.1.2024 (x64) Multilingual | 448 MB


Experience the flexibility of ARES Commander Edition, the powerful CAD software for day-to-day work as well as complex projects. Leverage the productive tools and intelligent features for drafting and design that you have come to expect from top CAD products, at a significant cost savings. Create 3D objects using the ACIS® 3D Solid Modeler which is tightly integrated within the software.


Get Started with ARES Commander
ARES Commander is a switch made easy - providing a familiar look & feel that is intuitive for any experienced CAD user. Much more than a cost-effective alternative for DWG-editing, ARES Commander is making no compromises in features and innovations.

New Features in ARES Commander 2020:
The ARES CAD Software offers you more than a cost-effective alternative to create or modify drawings in DWG. Discover below some of the latest and greatest innovations for ARES Commander
Modern DWG Editing for Desktop, Mobile and Cloud
Discover the unrivaled agility of our Trinity of CAD concept. With ARES Commander you keep enjoying the comfort and performance of fully-installed CAD software for your daily work. Yet, the close interaction with our mobile and cloud versions bring your productivity to the next level.

Drawing Compare
- Compare two versions of a drawing to display the differences with colors
- The new Drawing Compare palette allows you to compare the current drawing with another one.
- E.g.: Understand modifications made by a colleague, compare two options for the same project, show before and after... etc.

Data Extraction
- Extract information from entities or blocks
to a table or a CSV file
- The Data Extraction wizard enables you to quickly create a bill of materials or to extract other types of information from your drawings.
- Select entities and filter only the data you want to extract. You can further insert it as a table in the drawing or generate a file that can be imported in a spreadsheet.

Custom Blocks Improvements
Equivalent to the dynamic blocks in other CAD software, you can use the custom blocks to create smarter entities, which size and look will adapt parametrically with additional grips. You may also include a dropdown menu to switch between different types and options for the same block.

Convert dynamic blocks into custom blocks
You can use dynamic blocks created with AutoCAD as they are. They will keep their intelligence and parameters in ARES Commander. But now you may alternatively use the CBCONVERT command to convert them into custom blocks which definition can be further modified with ARES Commander.

Grip Editing of Hatches and Gradients
Manipulate the contour of your hatch or gradient hatch like if it was a Polyline. Select any hatch entity and you will see grips that will help you to manipulate directly the shape. Hovering over a grip point displays also a contextual menu with editing options.

Associative Patterns
Array copies of the same entity along multiple lines and columns and modify the pattern as you wish. Patterns allow you to replicate an entity following a linear or circular organization or along a path. These patterns are now associative. You can now edit them using grips or by a double-click on the associative pattern.

Lasso Selection
New selection method to save time! Use the lasso selection method to specify entities within an irregularly formed contour specified by dragging the cursor.

PCX Print Configuration Files
Equivalent to the PC3 format in other CAD software. Import PC3 files or create and save new printer configuration files in PCX format. It makes it easy to reuse and share with colleagues the same configuration for successive printings.

Work Faster in 3D
New OFFSETEDGES and CONVERTEDGES commands. These new commands help you to extract 2D entities from the edges of 3D solids or surfaces. This is in particular useful to extract construction entities you will use as a reference to create other 3D shapes combining with boolean operations or Push/pull actions.

Customize Your Workspaces
New CAD General workspace. The CAD General workspace offers an alternative ribbon to the default "Drafting & Annotation" workspace of ARES Commander. Icons are reorganized to facilitate the switch from AutoCAD or other similar CAD software.. Easily create and save your workspaces. Reorganize the user interface of ARES Commander as you wish and save your configuration as a new workspace.

New Markup Features
The new markup features let you share comments and feedback with a new type of annotation features. Unlike other annotation tools such as text or dimensions, markups do not insert any entity in the drawing, they are like a collaboration layer on top of the drawing. Markups can be created from ARES Commander, ARES Touch, and ARES Kudo. They are synchronized in real-time across all the ARES users and their devices. For that reason, it is a service operated in the cloud. To use markups it is therefore required to use ARES Commander's Cloud storage palette to save the drawing in Cloud storage.

New BIM Features
The version 2020 represents the first step of Graebert's revolutionary roadmap to build the best-in-class CAD platform to document BIM projects.

Requirements: Windows 8 or 10 (64-bit)

Home Page -
Код:
http://www.graebert.com


DOWNLOAD LINKS:

Код:
https://rapidgator.net/file/a4a36dfd2104312b49f9b38942ecb896/ARES_Commander_2020.1_Build_20.1.1.2024_x64_Multilingual.rar
Код:
http://nitroflare.com/view/1C78B6D4E58A17C/ARES_Commander_2020.1_Build_20.1.1.2024_x64_Multilingual.rar
Код:
https://uploadgig.com/file/download/3bB291e5D2aD09De/ARES_Commander_2020.1_Build_20.1.1.2024_x64_Multilingual.rar
KAMAL вне форума   Ответить с цитированием
Старый 28.05.2020, 16:08   #484
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение Autodesk Inventor Nesting Utility 2021 x64 Multilingual

Autodesk Inventor Nesting Utility 2021 x64 Multilingual






Autodesk Inventor Nesting Utility 2021 x64 Multilingual | 515 MB


As part of its ongoing commitment to high-quality products and services, Autodesk has released Autodesk Inventor Nesting 2021.


Autodesk Inventor Nesting 2021 Release notes - Date: May 2020
What's New

- "Update" in the context menu has been renamed to "Refresh."
- The Create Nest Study and Edit Nest Study dialogs have been updated to a tabbed design.
- Create Nest Study has a new option: "Automatically Manage Nests."
. When enabled:
. Whenever new sources are created, they are added to the nests in the nesting study.
. New nests are created if a new source is created with a new material that wasn't used before, or if an existing source is changed to a material that wasn't used before.
. Nests get deleted if there are no more sources in the nest, which can happen if the sources were deleted or if their material was changed to a different material.
- The Browser context menu for the Nest Study, Nest, and Sheet nodes now includes a "compare" option that enables you to compare two or more results.
Summary of Fixed Issues
- "(1)" is appended to file names of exported nest results.
- 3D Compare view for some parts is wrong.

- After upgrading from 2020 to 2021, if you want to use the customer configuration created in 2020, copy the folders from "C:\Users\%username%\Documents\Autodesk\Invent or Nesting 2020" to "C:\Users\%username%\Documents\Autodesk\Invent or Nesting 2021."
- Adding the same shape but with different parameters to the Edit Nest dialog is not allowed.
- In the Create Nest Study dialog, the same packaging cannot be added more than once.
- Check-in of an INEST file will be blocked if its source IAM or IPT file is not checked in.
- If translation fails with the message "Problems encountered while saving the document", go to "C:\ProgramData\Autodesk\Inventor Nesting 2021\Sources\" and remove any unnecessary files.
- Some tables and graphs in the Example-template-full report template are empty. Use the default template (automatically loaded) instead.
- Cannot author a sketch containing a spline.
- Creating a 3D Model of a sheet as an assembly leaves invisible documents behind in memory. Use File > Close all to close these lingering documents.
- Turning on the Rotate 90, 180, 270 values for a nest has no effect if these rotate parameters are turned off in the nest's material definition.
- In the Create New File dialog box, only one template might be shown. Browse to the appropriate language folder to see all available templates.
- Multiple contours in DXF files will be treated as a single shape for nesting.
- Material and unit of the IPT source file cannot be modified in Inventor Nesting and therefore must be set in the IPT file itself. When you delete a material used by an IPT source file, you need to re-extract shapes from the IPT to restore the material.
- CSV export does not currently support field separators within values.
- To avoid read-only messages, be sure to start AutoCAD prior to opening a DXF source file from within Inventor Nesting (this is standard AutoCAD behavior).
- The 3D Model command sometimes misses the external boundary of some nested parts.
- Warning and error messages displayed during shape extraction and nesting are not localized.
- Splines in a DXF file are only extracted after conversion to polylines by first saving the DXF file in R12 format.
- Changing the default INEST template unit doesn't work.
- Layer names cannot contain spaces.
- Localization is not supported when editing configuration files for layer extraction.
- Undo and Redo might not always work as expected.
- To avoid creating redundant materials, postpone setting Inventor as your material Provider until you have selected all sources you want to nest in the document.
- In 3D Detailed/Compare View, switch configuration file, then re-extract source file, INV crash when Update command running.


Inventor Nesting is CAD-embedded sheet metal nesting software that helps optimize yield from flat raw material.
Available with a subscription to the Product Design & Manufacturing Collection, Nesting Utility works right inside Autodesk Inventor software, so nesting studies can be created and then updated to reflect any changes to the design.

Easily compare nesting studies to optimize efficiency and reduce costs, and export 3D models or DXF files of the completed nest for cutting path generation.
In this recorded webinar, join Synergis Applications Consultant, Mark Lancaster, as he provides an overview of Autodesk Inventor Nesting functionality. If you work with sheet metal this video will be a great primer for the nesting functionality within Inventor.


Autodesk helps people imagine, design and create a better world. Everyone-from design professionals, engineers and architects to digital artists, students and hobbyists-uses Autodesk software to unlock their creativity and solve important challenges.


Product: Autodesk Inventor Nesting
Version: 2021 Build: 5.0.37
Supported Architectures: x64
Website Home Page :
Код:
http://www.autodesk.com
Language: multilanguage
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: Autodesk Inventor 2021
Size: 515.1 mb

System Requirements for Autodesk Inventor Nesting 2021
Operating System
- 64-bit Microsoft Windows 10
- 64-bit Microsoft Windows 8.1 with Update KB2919355
- 64-bit Microsoft Windows 7 SP1
CPU Intel Xeon E3 or Core i7 or equivalent, 3.0 GHz or greater / 64-bit Intel or AMD, 2 GHz or faster
Memory 20 GB RAM or more / 8 GB RAM
Disk Space 250 GB free disk space or more / 100 GB free disk space
Graphics Microsoft Direct3D 11 or capable graphics card or higher / Microsoft Direct3D 10 or capable graphics card or higher
Other
- DVD-ROM
- 1280 x 1024 or higher screen resolution
- Internet connection for Autodesk 360 functionality, web downloads, and Subscription Aware access
- Microsoft Internet Explorer 8 or higher
- Microsoft .NET Framework 4.6 or later.




DOWNLOAD LINKS:


Код:
https://dropapk.to/p4oypol52ves/Autodesk_Inventor_Nesting_Utility_2021_x64_Multilingual.rar
Код:
https://rapidgator.net/file/b62e7407843016fd012bea8240ba3e3b/Autodesk_Inventor_Nesting_Utility_2021_x64_Multilingual.rar
Код:
http://nitroflare.com/view/8EAA196905925D6/Autodesk_Inventor_Nesting_Utility_2021_x64_Multilingual.rar
Код:
https://uploadgig.com/file/download/E1d2F29a32b8DFc1/Autodesk_Inventor_Nesting_Utility_2021_x64_Multilingual.rar
KAMAL вне форума   Ответить с цитированием
Старый 28.05.2020, 16:20   #485
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение Autodesk 3ds Max 2021.1 x64 Multilingual

Autodesk 3ds Max 2021.1 x64 Multilingual






Autodesk 3ds Max 2021.1 x64 Multilingual | 6.44 GB


Autodesk has launched 3ds Max 2021.1, the latest update to the 3D modelling and animation software, including a number of significant new features for game development and VFX work.


Fixed issues
MAXX:Alembic
- A new UI export option has been added to support data cleanup when exporting alembic files.
MAXX:Animation
- Fixed Motion Capture Midi ping sound
- Fixed issue importing FBX without UI not correctly applying scene scaling.
- SplineIKControl, SkinWrap Patch, and SkinMorph now preserve visibility state on file save/load.
- Fixed UI clipping with Camera Tracker utility.
MAXX:Animation, MAXX:Modeling, MAXX:Performance
- Fixed a crash that would occur when double-clicking on the World name in Track View
MAXX:Animation, MAXX:Viewports
- Max would not start when 10 GPUs are present
MAXX:Core
- Fixed Flight Studio so that it doesn't evaluate nodes at time 0 on scene file load, rather it evaluates nodes at the beginning animation time.
- Do not display the "A modifier exists in the stack that depends on topology" warning if in quiet mode.
- Fixed problem with undo system caused by error while interpreting incorrect Python code,
Modify the Plugin Package Manager so that it does the following:
- Display an error if 3ds Max tries to load two different packages that have the same versions and upgrade codes.
- Don't display an error if 3ds Max tries to load two identical packages. Instead, log a message in the Max.log file.
- Improved warning message when rendering an animation sequence without an output file being specified, and added the ability to silence the warning for the current 3ds Max session.
- Fixed multithreading issue with initialization of Missing Path Cache.
- Fixed BakeElementProperties setParamValue and setParamFPValue FPS methods.
- Date values are now shown properly in File Properties dialog, Custom tab.
MAXX:Core, MAXX:SDK
- Display a warning when a plugin's MUI file is missing.
MAXX:FBX, MAXX:Modeling
- Corrected mesh validation issue that affects FBX import speeds when the file contains invalid data.
MAXX:Interop
- Fixed edge visibility in the new ATF-based Sketchup importer. Edge visibility is assigned correctly; thus the conversions of imported meshes to Editable Poly produce correct geometries.
MAXX:MAXScript
- Added useMPCamEffect: to MAXScript createPreview method
- Changes to the expression of a script controller are now un-doable
- Fixed access violation when running macros.new MAXScritp command with invalid parameters.
- Math functions have improved accuracy for large integer, integer64, and integerptr values (those that cannot be accurately represented as float values)
- When turning off a Display Filter, nodes that were hidden by the filter have their material properly displayed.
- unRegisterRedrawViewsCallback, unregisterTimeCallback, unregisterSelectFilterCallback, unregisterDisplayFilterCallback, dotnet.removeEventHandler do not throw runtime error if passed 'undefined' as the function
- Fixed MAXScript 'apropos' command to properly handle ' ' as terminating character in pattern
- Fixed issue that '[' in MAXScript node path names was handled as the beginning of a regex set in some cases. Disabled regex set handling when dealing with node names in MAXScript.
- Can now set row of bigMatrix using array of float, and can now coerce row of bigMatrix to array.
- MAXScript time and key functions that operate on object hierarchies, such as deleteTime, addNewKey, and addEaseCurve, now operate on instanced controllers once
MAXX:MaterialEditors
- Maps added in SME are in Show Shaded Material in Viewport mode turned OFF.
If the setting:
[Materials]
DefaultMaterialViewportMode=1
- is manually added in 3dsMax.ini file, it's possible to restore the legacy behavior until 3ds Max 2020.1, with materials and maps not in Show Shaded Material in Viewport mode by default.
Materials added only in CME will update their properties in real-time in the viewport.
MAXX:Modeling
- When using the soft selection, or invert soft selection, the weight index now accumulates across each shape so the proper knot weight is used.
- The bounding box will now be properly displayed when using timing offset of a fluid cache on the Fluid Loader object.
- 3ds Max now does a better job of detecting when UV changes have occurred on your mesh and thus will store the UV changes to your scene file on a save operation.
- Resolved an issue where "save to previous (2018-2020)" was not working properly if you had multiple copies of the Chamfer modifier on your mesh due to an error with the version indicator .
- Fixed an error with the Chamfer modifier where the lookup table that was generated to map edges to map seams might become out of bounds and invalidated and crash 3ds Max.
- Fixed an error that was erroneously altering already-extant faces, rather than creating and adjusting new faces when using chamfer with a Meshsmooth modifier
- Additional cleanup is now performed when applying a border extrusion on an Editable Poly object with a border width of 0, vertices on border polygons that have 3 edges will no longer see a duplication due to additional error checking and fixing for consecutive non-extruded edges.
- Resolved a crash issue that was discovered when encountering out of bounds data during a file load when dealing with hidden edge data.
- Added support for improved checks with the texture map and vertex color channels as a part of the Weighed Normals calculation to prevent a crash with the modifier.
- Fixed a crash error that could occur when using two symmetry modifiers. This error was caused by bad face vertex data that may hold invalid normals. When this type of error is encountered the modifier will now correct for this error.
- Resolved an issue with chamfer where small angle and distance tolerances were applied incorrectly resulting in straight edges instead of curved ones. We have adjusted the collinear tolerance for arc interpolations to correct for this.
- Resolved an issue where a reset command was issued and the bind pose on Skin Wrap was not properly updating. We have also exposed a new Maxscript command called fullReset to call this reset action as well.
- Improved the calculation of the depth and the resulting tangent vector results when using a negative chamfer value (such as -1) when applying a chamfer. This should result in inside corners appearing cleaner and more in line with the expected results that the end user is seeking.
- Fixed a cut and paste operation in the DCM that was causing a crash with 3ds Max when some data instances were pointing to the original object instead of the applied object.
- Updated the Vertex Paint modifier to normalized NaNs and vertex color information that are not set in the correct range and data information, which would cause issues when attempting to use the Blur brush. Improved the Vertex Paint blur brush to better support being smaller than the faces that it supports. Improved the Vertex Paint blur brush so that it can better handle large data sets of information and how it processes how it should blend vertex paint information.
- Explicit Normals are now retained when using Editable Poly and performing the following actions: No longer resets normals when collapsed to, Detach to Clone, Detach to Element, Detach to Element as clone, Clone to Object, Clone to element, Attach
- Explicit Normals are now retained when using Edit Poly and performing the following actions: No longer resets modifier resets normals when applied,
- Detach to Clone, Detach to Element, Detach to Element as Clone, Clone to Object, Clone to element,
Attach
- Edit and Editable Mesh will now preserve explicit normals that have been applied to your mesh when performing the following actions: Applying Edit Mesh, Attach , Detach to Object , Detach to Element, Clone to Object, Clone to Element, Detach as Clone to Element,
- Selection sets are now restored with file loads in 3ds max
MAXX:Modeling, MAXX:Performance
- Improvements to the mesh selection algorithms that should speed up performance for machines that have 4 cores/threads or less
- The intersectRay MAXScript function will now perform with increased accuracy and consistency with both mesh and MNMesh type objects when dealing with faces by performing improved bounding box tests.
- Added a Track View action item call Delete Selected Custom Attributes to delete any selected Custom Attributes in the active Track View and help reduce file bloat issues. It is only enabled when a Custom Attribute is selected.
MAXX:Performance
- Anim Layers were not being removed when the the controlling node was deleted. Now when a node is deleted any anim layers referencing that node are also deleted. Also on file open/merge anim layers that are orphaned are deleted.
- Improved file loading, saving, and/or merging when dealing with Motion Clips; we now cull out orphaned motion clips that are unreferenced. ParamBlock2 post load callback speed has also been improved.
MAXX:Python
- Fixed issue where MAXScript values created when calling MAXScript function from Python were not properly protected from garbage collection. Also improved memory stack handing when passing large argument lists.
- MAXScript objects are keeping their identity when wrapped around set data structures in Python. MAXX-56387
- Improved Python exception traceback information to also display the information from the first call level. MAXX-56107
- Fixed assigning a new value to a SubAnim (an animatable property of a scene object accessed by index instead of by name) through Python. It is now possible to assign a new controller to a SubAnim in Python. For example, the following code assigns a noise controller to obj's SubAnim identified by index: pymxs.runtime.getSubAnim(obj, index).controller = noise_float())
- 'MAXClass' MAXScript types can now be compared in Python without exception being thrown and logged, which were interrupting Python script execution, and resulted in 3dsMax Batch reporting errors in tasks that executed such Python code.
- Deleting an item using Python from a Maxscript collection now removes it from the collection as opposed to setting it to None
MAXX:RealTimeWorkflows
- Enabling the MacroRecorder may have a significant performance impact on the Bake to Texture tool performance
- Map order in Bake to Texture tool is not preserved after loading an existing scene
- Output-To settings are not exposed to Maxscript
- Multiple line editing of the Output-To column for Objects is not functional
- Multiple line editing of the Output-To column for Maps is not functional
- When baking a map using Map Override with Scanline, the map will not be shown in the Bake to Texture window if the scene is closed and re-opened
- When dealing with large numbers of objects with bake maps defined, performance may be degraded.
- Bake to Texture Output-To state sometimes resets to File Only and loses settings when switching Output-To options
MAXX:Rendering
- Quicksilver will no longer use Time to render in the SME thus not locking user out of Max.
- Optimization of OpenImageIO cache setting to improve performance for evaluation of OSL shaders. Increased the memory limit from 2 GB to 16 GB before swapping textures.
- OSL String maps that are connected will now appear in viewport as expected.
- Fixed incorrect scaling of the Render Presets UI.
MAXX:UI
- Text on some buttons in Configure Modifier Sets may appear truncated.
MAXX:Viewports
- 3ds Max 2020.1_Update makes Depth-of-Field effects also apply to the environment when seen as a viewport background the same way as it does in the rendering. If this is not desired, it can be disabled by editing 3dsmax.ini, and set DisableDOFForBackground=1 in the [Nitrous] section.
- Note that if you previously used the "Background Blur" feature in the "HDRI Environment" OSL map to "fake" a depth-of-field effect in the viewport, that is no longer necessary. In fact, if you do, you will get a "double blur" effect, which may not be what you expect.
MAXX:ViewportsMaterials
- Loading .fx files with Legacy Direct3D will no longer crash Max.
Known issues and workarounds
MAXX:RealTimeWorkflows
- Issue: Multi-Tile texture baking may not function as expected on some OSL nodes that do not contain an Offset parameter, such as the OSL BitmapLookup node. Workaround: Use the OSL Uber Bitmap when texture baking is required, or create a UVW Transform node and connect it to the UVW input for other OSL nodes. The texture baking process can leverage the UVW Transform node to bake multiple tiles.

3ds Max 2021 introduces a number of features that should be significant for game and visual effects artists, including support for metalness/roughness and specular/glossiness PBR workflows.
The update adds support for PBR materials, plus a new PBR-compatible Bake to Texture tool; adds new OSL shaders and support for Substance .sbsar files; and makes Arnold the software's default renderer.
3ds Max 2021 | New Features and Updates

Autodesk. helps people imagine, design and create a better world. Everyone-from design professionals, engineers and architects to digital artists, students and hobbyists-uses Autodesk software to unlock their creativity and solve important challenges.


Product: Autodesk 3ds Max
Version: 2021 Update 1 *
Supported Architectures: x64
Website Home Page :
Код:
http://www.autodesk.com
Language: multilanguage
System Requirements: PC **
Supported Operating Systems: **
Size: 6.5 Gb

* Note: This is a full installer, you do not need to have 3ds Max 2021 installed to install this update but it will work fine if you do have 3ds Max 2021 already installed.

Autodesk 3ds Max 2021 software is supported on the following 64-bit operating systems and at a minimum, requires a system with the following 64-bit hardware:
Operating System
Microsoft Windows 7 (SP1), Windows 8, Windows 8.1, and Windows 10 Professional operating system
Browser Autodesk recommends the latest version of the following web browsers for access to online supplemental content:
Microsoft Edge
Google Chrome
Microsoft Internet Explorer
Mozilla Firefox
Hardware
CPU 64-bit Intel or AMD multi-core processor with SSE4.2 instruction set
Graphics Hardware Refer to 3ds Max Certified Hardware for a detailed list of recommended systems and graphics cards
RAM 4 GB of RAM minimum (8 GB or more recommended)
Disk Space 9 GB of free disk space for install
Pointing Device Three-button mouse.




DOWNLOAD LINKS:


Код:
https://dropapk.to/ypwdw5u9e9af/Autodesk_3ds_Max_2021.1_x64_Multilingual.part1.rar
https://dropapk.to/qip3oqm0mn4c/Autodesk_3ds_Max_2021.1_x64_Multilingual.part2.rar
https://dropapk.to/zeg03vp5v2zq/Autodesk_3ds_Max_2021.1_x64_Multilingual.part3.rar
https://dropapk.to/0v39ghee8wro/Autodesk_3ds_Max_2021.1_x64_Multilingual.part4.rar
https://dropapk.to/yzfmg62o0l6v/Autodesk_3ds_Max_2021.1_x64_Multilingual.part5.rar
https://dropapk.to/37oebkzv57ss/Autodesk_3ds_Max_2021.1_x64_Multilingual.part6.rar
https://dropapk.to/95jt3ye46mfx/Autodesk_3ds_Max_2021.1_x64_Multilingual.part7.rar
Код:
https://rapidgator.net/file/3f7a9e0552d690774c6865c8b7cd86fc/Autodesk_3ds_Max_2021.1_x64_Multilingual.part1.rar
https://rapidgator.net/file/bc571665f241a64c1ea043dc45e184dd/Autodesk_3ds_Max_2021.1_x64_Multilingual.part2.rar
https://rapidgator.net/file/9c995c6df40fba31b6d6f2fc9a40463a/Autodesk_3ds_Max_2021.1_x64_Multilingual.part3.rar
https://rapidgator.net/file/21fac3a66b3dbbb51b74d6ce4a031660/Autodesk_3ds_Max_2021.1_x64_Multilingual.part4.rar
https://rapidgator.net/file/ed4ddc58edbf825caea50d54354a6ac6/Autodesk_3ds_Max_2021.1_x64_Multilingual.part5.rar
https://rapidgator.net/file/28f9d6cf040e19c9d54062452ea2796e/Autodesk_3ds_Max_2021.1_x64_Multilingual.part6.rar
https://rapidgator.net/file/d9cc8e7e288f00a082e8c88d0f9ac4b7/Autodesk_3ds_Max_2021.1_x64_Multilingual.part7.rar
Код:
http://nitroflare.com/view/BC4B13929C14B7B/Autodesk_3ds_Max_2021.1_x64_Multilingual.part1.rar
http://nitroflare.com/view/4B0810CD291B1FC/Autodesk_3ds_Max_2021.1_x64_Multilingual.part2.rar
http://nitroflare.com/view/E44B03435305410/Autodesk_3ds_Max_2021.1_x64_Multilingual.part3.rar
http://nitroflare.com/view/AD14E2CB31A1019/Autodesk_3ds_Max_2021.1_x64_Multilingual.part4.rar
http://nitroflare.com/view/5275BA389F74D44/Autodesk_3ds_Max_2021.1_x64_Multilingual.part5.rar
http://nitroflare.com/view/0C70C8CF78F1BA4/Autodesk_3ds_Max_2021.1_x64_Multilingual.part6.rar
http://nitroflare.com/view/C8291D0018BAC07/Autodesk_3ds_Max_2021.1_x64_Multilingual.part7.rar
Код:
https://uploadgig.com/file/download/d189e5b64f88384c/Autodesk_3ds_Max_2021.1_x64_Multilingual.part1.rar
https://uploadgig.com/file/download/a6F0cbaa4aa52893/Autodesk_3ds_Max_2021.1_x64_Multilingual.part2.rar
https://uploadgig.com/file/download/358c36a46cf7A21E/Autodesk_3ds_Max_2021.1_x64_Multilingual.part3.rar
https://uploadgig.com/file/download/7f7E0d5e8Dc7615E/Autodesk_3ds_Max_2021.1_x64_Multilingual.part4.rar
https://uploadgig.com/file/download/5b57c22673a306e8/Autodesk_3ds_Max_2021.1_x64_Multilingual.part5.rar
https://uploadgig.com/file/download/5da3F6894c42568b/Autodesk_3ds_Max_2021.1_x64_Multilingual.part6.rar
https://uploadgig.com/file/download/BdC001ad592ac018/Autodesk_3ds_Max_2021.1_x64_Multilingual.part7.rar
KAMAL вне форума   Ответить с цитированием
Старый 28.05.2020, 17:22   #486
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение BackToCAD Print2CAD 2021 v21.62a (x64)

BackToCAD Print2CAD 2021 v21.62a (x64)






BackToCAD Print2CAD 2021 v21.62a (x64) | 46 MB


Print2CAD is able to convert PDF files into a DWG or DXF file, which can then be imported into any CAD system where it can be edited. Print2CAD is an autonomous and CAD system-independent program. Print2CAD also converts DWG/DXF into PDF, TIFF/JPEG into DWG, DWF into DWG/DXF and HPGL into DWG/DXF.


Print2CAD 2021:
PDF to 2D DWG Conversion as Fully Editable Drawing
Vectorization on PDF Raster Images and OCR of Raster Text
DWG to 2D/3D PDF Publishing
PDF to CAD Import with OCR and Raster 2 Vector
PDF to CAD Conversion With Text and Symbol Recognition
PDF to DWG or DXF Conversion with Calibration of Coordiantes
Recognition of Layers, Walls, Corners, and Linetypes
Safe PreView of Suspecting PDF Files

Prepare
View Input, Cleanup Raster Pictures, choose the right threshold for the color black, markup the text areas and inclination.

Convert Vectors
Convert all PDF vectors and native PDF text, recognize circles and arcs, recognize right corners, frames, crosses, and recognize layers.

OCR of Text
OCR of not native text - text can be as raster, lines, or solid hatches. Normalize the text heights. Use Fuzzy Login for Symbol Recognition.

Raster 2 Vector
Separate parts of a raster picture and apply appropriate raster to vector method. Vectorize as lines, arcs, circles, Recognize layers and line weight. Recognize corners and symbols.

Coordinates Calibration
Calibrate the CAD coordinates using arbitrary calibration points. Use dimensions as reference points. Automatic calculate correct scale factors.

Post Processing
Calibrate the Coordinates. Change Colors and Text Heights. Recognize the Line Types. Clean up the vertex of polylines. Optimize the Coordinates.

All Functions at a Glance
PDF to DWG or DXF Converter
DWG to 2D/3D PDF Publishing
TIFF, JPEG Vectorization to DWG or DXF Converter
HPGL and DWF to DWG or DXF Converter
Based on Open Design Alliance CAD Equalizer
Native 64 bit App, no PDF Size Restrictions
Vectorization of PDF Raster Pictures
PDF Text Recognition (OCR of Drawing)
PDF Line Type Recognition
PDF Coordinates Scaling (Calibration Points)
DWF to DWG or DXF Converter
3D PDF to PRC or U3D Converter
Free Access To AI Cloud Converter
PDF Layer Recognition
PDF Frame, Right Corner, Symbol Recognition
PDF (Architectural Scan) to DWG or DXF
PDF (Contour Lines Scan) to DWG or DXF
PDF (Digital Photo) to DWG or DXF
PDF (OCR of Text Page) to DWG or DXF
Supports DWG 2000-2020
Product of a US Based Company
Works With All CAD Systems
Top AutoCAD PDFin Extender with Raster To Vector
New Feature! Static View of Suspicious PDF Files
Incl. DeepView - Structure Viewer and Post Processor
OCR Recognition of Inclined Text
Automatic Separation of OCR Areas
Automatic Markup of Text Inclination
Editing of Recognized PDF Text
Recognition of Text as Raster, Line, or Solid Hatches
Automatic Spelling Check (English, Spanish, Italian, French, German)
Check and Correction of OCR Recognized Text
OCR Recognition of Symbols
Normalization of Text Heights
Raster To Vector and Recognition of CAD Elements
Vectorization of PDF Raster Pictures (Scanned Drawings)
Raster Image Vectorization as Lines
Raster Image Vectorization as Outlines
Raster Image Vectorization as Solids
Raster Image Coordinates Calibration
OCR of PDF Raster Pictures (Text Recognition)
Line Type Recognition (binding of small dashes to a line with line type)
Frames and Rectangle Recognition
Symmetry Recognition in Raster Pictures
Circle and Arc Recognition in Raster Pictures
Right Corner Recognition in Raster Pictures
Coordinates Calibration in Raster Pictures

System Requirements:
System: 64bit Windows 10, Windows 8, Windows 7 (SP1), Windows Vista® (SP1)
Print2CAD™ Software is a stand alone Windows (64 bit) program based on Autodesk Trusted DWG that works independently with all CAD systems (and with all AutoCAD® versions including AutoCAD® AI).
RAM:
Windows 10: 4 GB RAM (for TIFF, JPEG or scanned PDF Vectorization)
Windows 8: 4 GB RAM (for TIFF, JPEG or scanned PDF Vectorization)
Windows 7: 4 GB RAM (for TIFF, JPEG or scanned PDF Vectorization)
Windows Vista: 2 GB RAM (for TIFF, JPEG or scanned PDF Vectorization)


Home Page -
Код:
https://backtocad.com/


DOWNLOAD LINKS:

Код:
https://rapidgator.net/file/5dce10a74ebcaad7f3b3672cf169b274/BackToCAD_Print2CAD_2021_v21.62a_x64.rar
Код:
http://nitroflare.com/view/76461AF37FA5C89/BackToCAD_Print2CAD_2021_v21.62a_x64.rar
Код:
https://uploadgig.com/file/download/2Ce79252C67E6b31/BackToCAD_Print2CAD_2021_v21.62a_x64.rar
KAMAL вне форума   Ответить с цитированием
Старый 28.05.2020, 17:32   #487
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение Bella Render 20.7.0.0 x64

Bella Render 20.7.0.0 x64






Bella Render 20.7.0.0 x64 | 485 MB


Diffuse Logic is pleased to announce the availability of Bella Render 27.0.0 is a spectral renderer, built from the ground up to achieve unmatched quality. By adhering to a physics-based approach, it not only produces truly photographic images, but does so with a predictability that both simplifies use, and enhances productivity.



Bella is a state of the art spectral renderer, built from the ground up to achieve unmatched realism. By adhering to a physics-based approach, it not only produces truly photographic images, but does so with a predictability that both simplifies use, and enhances productivity. Through its flexible node system, and its intuitive physically-based material and camera models, Bella seeks to help you unlock your true potential as a digital artist & photographer.

Bella GUI is a standalone application primarily intended for rendering Bella scenes written with a plugin, in order to allow work to continue in the 3D host application, while rendering is done. However, it does have a good deal of editing functionality, so it can be a comfortable alternative for various parts of a workflow.

Bella for SketchUp is a very simple-to-use plugin (extension in SketchUp parlance) which enables you to create photorealistic renderings of your SketchUp models, with a minimum of effort. The plugin automatically translates applicable SketchUp settings (sky, shadows, etc), and adds a small number of Bella-specific settings for controlling environment, camera, and materials.

The Bella for Rhino plugin integrates Bella directly with Rhino, with little need to learn anything new - in its initial iteration, the plugin supports seamless translation of Rhino settings, materials, and environments, whether rendering directly in a Rhino viewport, or using the Render command.

Bella for Maya integrates Bella directly into Maya, allowing for interactive rendering of scenes while they are being created and edited. Bella is based on a nodal system much like Maya's own, and Bella's nodes are exposed in Maya as native nodes, yielding a natural experience for Maya users. It is possible to work entirely within Maya, but the plugin also bundles the Bella GUI, for rendering outside of Maya, if such a workflow is preferred.

Bella GUI Demonstration

Bella is developed by Diffuse Logic, a Barcelona-based software company with decades of cumulative experience in the fields of physical simulation and rendering, as well as user-interface design and plugin integration.


Product: Bella Render
Version: 20.7.0.0 *
Supported Architectures: x64
Website Home Page :
Код:
https://bellarender.com/
Language: english
System Requirements: PC **
Supported Operating Systems: **
Software Prerequisites: **
Size: 485.7 mb

Bella GUI 20.7.0.0 Standalone
Bella Render 20.7.0.0 for Autodesk Maya
Bella Render 20.7.0.0 for Rhino
Bella Render 20.7.0.0 for SketchUp

Bella supports running on 64-bit machines and operating systems only. It is recommended to have at least 8GB of memory, but generally preferable to have 16GB or more. Bella itself is very compact, but using it may involve large files, so you should have plenty of disk space (preferably SSD) available.

In terms of CPU, the recommendation is simply to have as many fast cores as possible. You can tell Bella to use all cores by setting threads to zero, or easily leave some free, to help the OS remain responsive, by setting threads to -1 or -2.

On Windows, we support running on version 7 and higher. Bella may work fine on earlier versions, but we do not officially support them.
The currently-supported versions of Maya are 2018 and 2019, Rhino 6, SketchUP 2017 or higher.




DOWNLOAD LINKS:

Код:
https://rapidgator.net/file/d9dd4fd87240189cf2195e6f0f81c2d6/Bella_Render_20.7.0.0_x64.rar
Код:
http://nitroflare.com/view/68377D3B7560B96/Bella_Render_20.7.0.0_x64.rar
Код:
https://uploadgig.com/file/download/10ca657a66FDa272/Bella_Render_20.7.0.0_x64.rar
KAMAL вне форума   Ответить с цитированием
Старый 28.05.2020, 17:43   #488
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение CADprofi 2020.05 build 200402 x64 Multilingual

CADprofi 2020.05 build 200402 x64 Multilingual






CADprofi 2020.05 build 200402 x64 Multilingual | 847 MB


CADprofi announces the release of CADprofi version 2020.05 is a comprehensive CAD application that accelerates the design work in many branches. The 2020.05 version brings new automation tools to the program. A highlight last version is the extension of options available for the arrange command. Arrange allows you to quickly place patterns of objects on your drawing.

CADprofi 2020.05
Below you can find a quick overview of CADprofi 2020.05 changes:
- CADprofi - object placement (command extension)
The following video demonstrates this updated feature.

- CADprofi Electrical - update of modular apparatus library.
- New Schrack Technik library.
- New NOARK Electric library.
- Update of Hager library.
- CADprofi HVAC & Piping - Maico Ventilatoren roof blowers.
- Update of manufacturers' libraries: Vaillant, Reflex, Viessmann, Wilo, Eaton, Lovato.
- CADprofi 2020.05 has been adjusted to work with latest CAD programs, including: AutoCAD 2021, Ares Commander 2020, ActCAD 2020 (x64) and CMS IntelliCAD 9.2 (x64). CADprofi 2020 currently works with many base CAD programs including: AutoCAD (since the 2000 version), BricsCAD, GstarCAD, IntelliCAD, progeCAD, ZWCAD, ARES Commander Edition and others.

Notice: Full description with screens can be found in


CADprofi Suite program consists of the following modules: CADprofi HVAC and Piping, CADprofi Electrical, CADprofi Architectural, CADprofi Mechanical, CP-Symbols and CP-Manufacturers programs.
CADprofi HVAC & Piping is a parametric CAD application for the design of building technical equipment. All types of technical installations are supported: heating, ventilation, air conditioning, piping and ducts.
CADprofi Mechanical contains a wide range of standardized parts, steel bars, steel profiles and other components that comply with DIN, EN, ISO and national standards. The library includes bolts, screws, washers, nuts, joints, rivets, studs, angles, and parts used in the construction of heat exchangers and other devices. An excellent editor of diagrams and projects greatly facilitates the creation of drawings of hydraulic and pneumatic systems.
CADprofi Architectural can be used to create building plans, cross sections and a facade view. Convenient application features facilitate the design of multi-layer walls, architectural sizing, and the rapid creation of structural descriptions. The module includes a complete library of windows, doors, furniture, and other furnishings. As an additional feature, the application can be used to design evacuation and fire fighting plans.
CADprofi Electrical can be used for the design of complex objects such as electricity, lighting, low-voltage systems, telecommunications, security systems and antenna installations. The application contains several thousand electrical elements and symbols (lamps, switchgears, and much more). The application provides an easy way to design wiring and cable channels. Among the most useful features are automatic numbering (addressing) of electrical circuits, and convenient design and editing of the wiring diagram.
Presentation of CADprofi company

CADprofi is an international company engaged in the development of CAD applications working in the AutoCAD environment (and other Autodesk products), BricsCAD GstarCAD, progeCAD, ZWCAD, IntelliCAD and others. CADprofi was founded in Poland in 1996.


Product: CADprofi
Version: 2020.05 build 200402
Supported Architectures: x64
Website Home Page :
Код:
http://www.cadprofi.com
Language: multilanguage
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: *
Size: 847.6 mb

Our current program versions are compatible with:
- 4M CAD V14 - V16, V19
- ActCAD 2020 (64bit)
- ARES Standard Edition 2019
- ARES Commander Edition 2012 - 2020
- AutoCAD 2000 - 2021 (32/64bit)
- AutoCAD LT 2000 - 2019 *) (32/64bit)
- AutoCAD Architecture 2000 - 2021
- AutoCAD Mechanical 2000 - 2021
- AutoCAD MEP 2008 - 2021
- AviCAD 2014 - 2017, 2019
- BitCAD V6
- BricsCAD V4 - V20
- CADian 2012 - 2017, 2020
- CADMATE 2015 - 2016, 2018
- CADopia 8, 19
- CMS IntelliCAD 7.2, 8.1, 8.2 x64, 8.3, 8.4, 9.0, 9.1, 9.2 (64bit)
- FineELEC 11
- GstarCAD 2010 - 2020
- IBSCAD 2018, 2019
- IntelliCAD 5, 6, 7.2, 8.1
- IntelliPlus 8, 2013 - 2014
- JetCAD 2012
- NUVOCAD 2013
- progeCAD 2008 - 2020
- StarICAD 2008
- ZWCAD 2008i - 2012, ZWCAD+**, ZWCAD Classic, ZWCAD 2017 - 2020**
- Other programs on request
*) only with optional software.
**) CADprofi works only with the Professional version. ZWCAD Standard is not supported by CADprofi.




DOWNLOAD LINKS:

Код:
https://rapidgator.net/file/98998a8cbb23fde3f8e45567b6b6f672/CADprofi_2020.05_build_200402_x64_Multilingual.rar
Код:
http://nitroflare.com/view/B16D2E389C32F98/CADprofi_2020.05_build_200402_x64_Multilingual.rar
Код:
https://uploadgig.com/file/download/e437C796f7ae35Da/CADprofi_2020.05_build_200402_x64_Multilingual.rar
KAMAL вне форума   Ответить с цитированием
Старый 28.05.2020, 18:08   #489
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение Cradle scSTREAM with HeatDesigner 2020 Patch 6 x64

Cradle scSTREAM with HeatDesigner 2020 Patch 6 x64






Cradle scSTREAM with HeatDesigner 2020 Patch 6 x64 | 1.2 GB


Software Cradle is proud to announce the release of scSTREAM and HeatDesigner Version 2020, a part of the comprehensive suite of virtual product development from MSC Software.



Large-Scale Analysis Capability
Speed-up of drawing involving large element division
The display speed of the element division in a large scale analysis of approximately 1 billion elements has increased up to 10 times that of the previous version. A video card supporting OpenGL 4.0 or later is required.

Optimization of cluster node
The distribution of memory consumption on a node-by-node basis has been optimized when computing with a cluster machine. High-speed calculation can be expected in simulations experiencing memory swap issues. Analysis with more number of elements can be performed in your current environment.

FLD file output by single precision
The size of the FLD file can be reduced to approximately 2/3 of that of the previous file output. This resolved the issue of when saving or transferring a large FLD file from large-scale simulations.

Enhanced Multi-phase Function
DEM(Discrete Element Method)
Heat transfer between particles and between particles and fluid can be calculated. Flow at a clogged filter can be considered.

Enhanced Multi-physics Function
Automatic Generation of Thermal Model for 1D-CAE
Heat path information generated by HeatPathView can be inherited to MapleSim. By using this function, itis possible to construct 1D-CAE model from 3D-CAD data and use it as multi domain heat transfer node.

New Feature of Postprocessor
Parts Object
Parts display and control similar to that in Preprocessor can be done in Postprocessor. This is effective when parts need to be control by inheriting the assembly structure or whenvisualappearance is most required.

New Features Dedicated to Electronics Field
Support for ECXML format
Thermal compact models made by semiconductor manufactures and data of other CFD tools can be imported. ECXML is an open file format that does not depend on a specific CFD tool and its capability is to be enhanced by JEDEC subcommittee.

Conversion into structure function
The simulation result can be converted to a structure function standardized by JEDEC standard (JESD51-14). A highly accurate thermal compact model can be created by fitting simulation results and the actual value of the semiconductor package.

New Features Dedicated to Architecture Field
Solar radiation absorptance considering the angle of incident
The incident angle dependent solar radiation can be considered. Postprocessor will reproduce so that the amount of solar radiation that passes through the window will be small when the incident angle is large, and vice versa.

scSTREAM is a general-purpose CFD tool that uses Cartesian or cylindrical structured mesh to enable easy mesh generation and high-speed simulations to be performed in a fraction of the time. Due to the meshing nature and analysis system that enables large-scale calculation, scSTREAM works best at processing extensive simulations, where users are required to solve thermal problems of electronic devices and indoor environment, wind flow, and heat island phenomena.

scSTREAM thermo-fluid software has serviced the electronics and architectural industries for thirty years. The ever-evolving software is characterized by its overwhelmingly user-friendly interfaces and high speed processing.
Spread of Virus in a Classroom - scSTREAM

HeatDesigner is a structured (Cartesian) mesh thermal fluid analysis software specially designed for electronics cooling thermal analysis. It uses core technology from Software Cradle's scSTREAM general purpose structured mesh thermal-fluid software product.

HeatDesigner's performance is optimized for applications that do not require precise reproduction of fine geometrical curvature to predict an accurate flow field. However, HeatDesigner is capable of accommodating meshes with over a hundred million elements enabling it to capture fine geometrical details. Like scSTREAM, the major advantages of HeatDesigner are fast calculations times and low memory consumption.
MSC Software Cradle Computational Fluid Dynamics (CFD) Solutions

Software Cradle Co., Ltd. part of Hexagon's Manufacturing Intelligence division, is an innovative provider of computational fluid dynamics (CFD) simulation software. Established in 1984, the company has pursued to offer unique, innovation focused, and highly reliable CFD solutions that enhance customers' product quality and creativity. In 2016, the company joined MSC Software Corporation, the worldwide leader in the field of multidiscipline simulation. As a truly global company, Software Cradle delivers all-inclusive multi-physics solutions.


Product: Cradle scSTREAM
Version: 2020 Patch 6 with HeatDesigner
Supported Architectures: x64
Website Home Page :
Код:
http://www.cradle-cfd.com
Language: english
System Requirements: PC *
Supported Operating Systems: *
Size: 1.2 Gb



DOWNLOAD LINKS:

Код:
https://rapidgator.net/file/65245b29232156d177bfb53204bedf5f/Cradle_scSTREAM_with_HeatDesigner_2020_Patch_6_x64.part1.rar
https://rapidgator.net/file/73c69c8491b70c0f1fb1bea1dd05dee2/Cradle_scSTREAM_with_HeatDesigner_2020_Patch_6_x64.part2.rar
Код:
http://nitroflare.com/view/F2DE6249E42919F/Cradle_scSTREAM_with_HeatDesigner_2020_Patch_6_x64.part1.rar
http://nitroflare.com/view/ACDC6E1A5214480/Cradle_scSTREAM_with_HeatDesigner_2020_Patch_6_x64.part2.rar
Код:
https://uploadgig.com/file/download/2a3efD2CdB35729c/Cradle_scSTREAM_with_HeatDesigner_2020_Patch_6_x64.part1.rar
https://uploadgig.com/file/download/20E80327C6490721/Cradle_scSTREAM_with_HeatDesigner_2020_Patch_6_x64.part2.rar
KAMAL вне форума   Ответить с цитированием
Старый 28.05.2020, 18:39   #490
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение Claris FileMaker Pro 19.0.1.116 Multilingual

Claris FileMaker Pro 19.0.1.116 Multilingual






Claris FileMaker Pro 19.0.1.116 Multilingual | 151 MB


Build apps like a boss. Take on digital transformation with Claris FileMaker. Quickly build custom apps that solve your business problems today - and tomorrow. Accelerate your business, unlock your team's creative potential, and drive to better outcomes.


Tackle any task.
Need an app to solve a really sticky business problem? Build it with FileMaker. It's got all the tools you need to roll up your sleeves and DIY - or team up with pro developers for next-level expertise.

Start today.
And by today, we mean today. With built-in templates, drag-and-drop design, and an intuitive graphical UI, you'll be app-building in no time. And your work goes live the second you're ready, across every device - that's the power of FileMaker.

Get inspired by a world of FileMaker apps.
Need an app now but crunched for time? Odds are you're not alone. Explore Marketplace to find the perfect jumping off point for your own custom app - from templates and components to fully-completed vertical market apps.
- CRM
- Project Management
- Content Library
- Asset Manager
- Invoicing Details
- Contract Management
- Event Planning
- Field Research
- Supply Management
- Tour Dashboard

All devices, all the time.
Secure, real-time sharing on any device. That means your app works on mobile or desktop, on the web, on premise and in the cloud. Because apps this important should be accessible anytime, anywhere.

Power for problem solvers.
Plug and play power.
Drag and drop prebuilt add-ons for instant app development. Add charts, calendars, kanban boards, activity timelines, and more. (Coming soon.)

NEW Mobile AI.
Use smart tech such as Core ML for things like image and sentiment recognition, Siri Shortcuts for voice-enabled interactions, and NFC reading - all on mobile.

NEW Zero to cloud.
Create apps directly in the cloud with zero configuration and deployment. Add fully-integrated jаvascript to your custom apps.

Complete tooling.
Use scripts, triggers, calculation functions, graphical design tools, and relational data modeling to build robust apps that scale with your business.

Total security.
Built on Claris Core, FileMaker includes industry-standard protections to keep your data secure - both in the cloud and on premise.

Integrate. Automate. Innovate.
Connect to all kinds of web services and apps in minutes using Claris Connect. It's the best way to automate your workflows.

System Requirements:
- Windows 10 Pro Edition (64-bit)
- Windows 10 Enterprise Edition (64-bit)
- Windows 8.1 Standard Edition (64-bit)
- Windows 8.1 Pro Edition (64-bit)
- Windows 7 SP1 Professional Edition (64-bit)
- Windows 7 SP1 Ultimate Edition (64-bit)


Home Page -
Код:
https://www.claris.com


DOWNLOAD LINKS:

Код:
https://rapidgator.net/file/5cd0970b1f4b4d7320f6dba35ba2e973/Claris_FileMaker_Pro_19.0.1.116_Multilingual.rar
Код:
http://nitroflare.com/view/AA85948F5BBC8F3/Claris_FileMaker_Pro_19.0.1.116_Multilingual.rar
Код:
https://uploadgig.com/file/download/4E326Db77825330c/Claris_FileMaker_Pro_19.0.1.116_Multilingual.rar
KAMAL вне форума   Ответить с цитированием
Старый 28.05.2020, 18:45   #491
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение Claris FileMaker Server 19.0.1.103 (x64) Multilingual

Claris FileMaker Server 19.0.1.103 (x64) Multilingual






Claris FileMaker Server 19.0.1.103 (x64) Multilingual | 251 MB


Claris FileMaker Server - Securely host custom apps in your on-premise environment. FileMaker Server is for teams and users that need to share data.


Tackle any task.
Need an app to solve a really sticky business problem? Build it with FileMaker. It's got all the tools you need to roll up your sleeves and DIY - or team up with pro developers for next-level expertise.

Start today.
And by today, we mean today. With built-in templates, drag-and-drop design, and an intuitive graphical UI, you'll be app-building in no time. And your work goes live the second you're ready, across every device - that's the power of FileMaker.

Get inspired by a world of FileMaker apps.
Need an app now but crunched for time? Odds are you're not alone. Explore Marketplace to find the perfect jumping off point for your own custom app - from templates and components to fully-completed vertical market apps.
- CRM
- Project Management
- Content Library
- Asset Manager
- Invoicing Details
- Contract Management
- Event Planning
- Field Research
- Supply Management
- Tour Dashboard

All devices, all the time.
Secure, real-time sharing on any device. That means your app works on mobile or desktop, on the web, on premise and in the cloud. Because apps this important should be accessible anytime, anywhere.

Power for problem solvers.
Plug and play power.
Drag and drop prebuilt add-ons for instant app development. Add charts, calendars, kanban boards, activity timelines, and more. (Coming soon.)

NEW Mobile AI.
Use smart tech such as Core ML for things like image and sentiment recognition, Siri Shortcuts for voice-enabled interactions, and NFC reading - all on mobile.

NEW Zero to cloud.
Create apps directly in the cloud with zero configuration and deployment. Add fully-integrated jаvascript to your custom apps.

Complete tooling.
Use scripts, triggers, calculation functions, graphical design tools, and relational data modeling to build robust apps that scale with your business.

Total security.
Built on Claris Core, FileMaker includes industry-standard protections to keep your data secure - both in the cloud and on premise.

Integrate. Automate. Innovate.
Connect to all kinds of web services and apps in minutes using Claris Connect. It's the best way to automate your workflows.


Minimum Requirements:
- CPU: Dual Core
- RAM: 8 GB
- Hard Drive: 100 GB or more, dependent on file size, requires minimum of 50 GB of free space. Solid State Drive (SSD) recommended.


Home Page -
Код:
https://www.claris.com


DOWNLOAD LINKS:

Код:
https://rapidgator.net/file/65ef2806bb99bd26055327886d3360a5/Claris_FileMaker_Server_19.0.1.103_x64_Multilingual.rar
Код:
http://nitroflare.com/view/71BC527666608BC/Claris_FileMaker_Server_19.0.1.103_x64_Multilingual.rar
Код:
https://uploadgig.com/file/download/e37fb22795CBD22b/Claris_FileMaker_Server_19.0.1.103_x64_Multilingual.rar
KAMAL вне форума   Ответить с цитированием
Старый 29.05.2020, 10:51   #492
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение Cradle SC/Tetra 14.0 Patch 6 x64

Cradle SC/Tetra 14.0 Patch 6 x64






Cradle SC/Tetra 14.0 Patch 6 x64 | 3.85 GB


Software Cradle is proud to announce the release of SC/Tetra 14.0, a part of the comprehensive suite of virtual product development from MSC Software.


CAE is now an essential tool in design and development for manufacturers. Computer Fluid Dynamics (CFD), is the most complexed calculation which requires time in CAE. Expectation towards CFD is to get complexed phenomenon solved with high accuracy in high speed.

Software Cradle updates products so that the user would feel the difference in features, operability and high speed of the calculations in daily operation, and lead the user to have confidence in their contribution to the development and design.

The SC/Tetra package is unique in that it contains a combined mesher and solver. It also defaults to using all tetrahedral elements, except where defined around certain bodies or along boundaries. This makes building a model very straightforward. When attempting to recreate the model of the wave tank, the software allows for the assembly of components from individual meshes. So building the wave tank was as simple as creating a meshed tank, a meshed Wave Generator and a meshed Wing and then overlay them appropriately and defining their motion. This works quite well, however when modeling 2D motion this can prove problematic. When generating 2D models a symmetry boundary is used, and should work with moving objects. However what can occur is one of the nodes on the moving objects can move outside the boundaries of the surrounding mesh. This causes the model to fail.

The solution is to make the model a 3D model, but this requires significantly more computational power. If the computing resources had been available however, this program would have proven very useful.

MSC Software Cradle Computational Fluid Dynamics (CFD) Solutions

Introduction SC/Tetra for MSC Cradle by ArnoX

Software Cradle Co., Ltd. part of Hexagon's Manufacturing Intelligence division, is an innovative provider of computational fluid dynamics (CFD) simulation software. Established in 1984, the company has pursued to offer unique, innovation focused, and highly reliable CFD solutions that enhance customers' product quality and creativity. In 2016, the company joined MSC Software Corporation, the worldwide leader in the field of multidiscipline simulation. As a truly global company, Software Cradle delivers all-inclusive multi-physics solutions.


Product: Cradle SC/Tetra
Version: 14.0 Patch6
Supported Architectures: x64
Website Home Page :
Код:
http://www.cradle-cfd.com
Language: english
System Requirements: PC *
Supported Operating Systems: *
Size: 3.85 GB




DOWNLOAD LINKS:

Код:
https://rapidgator.net/file/e4b6d5bada03822dd8da03853b492312/Cradle_SCTetra_14.0_Patch_6_x64.part1.rar
https://rapidgator.net/file/62bf202750ad24c83dbe0b87f345204d/Cradle_SCTetra_14.0_Patch_6_x64.part2.rar
https://rapidgator.net/file/a5644da642431f47d09b6526016088f8/Cradle_SCTetra_14.0_Patch_6_x64.part3.rar
https://rapidgator.net/file/0ce7f351b096165ad30d23f5230d9414/Cradle_SCTetra_14.0_Patch_6_x64.part4.rar
Код:
http://nitroflare.com/view/C857A11D087D3DC/Cradle_SCTetra_14.0_Patch_6_x64.part1.rar
http://nitroflare.com/view/E5B0F3D84B75A11/Cradle_SCTetra_14.0_Patch_6_x64.part2.rar
http://nitroflare.com/view/8689316CAEF9412/Cradle_SCTetra_14.0_Patch_6_x64.part3.rar
http://nitroflare.com/view/08C32FD8ABF1871/Cradle_SCTetra_14.0_Patch_6_x64.part4.rar
Код:
https://uploadgig.com/file/download/A5Ec780f91cb59ce/Cradle_SCTetra_14.0_Patch_6_x64.part1.rar
https://uploadgig.com/file/download/753704eD13a0E643/Cradle_SCTetra_14.0_Patch_6_x64.part2.rar
https://uploadgig.com/file/download/df6a37f2a614050C/Cradle_SCTetra_14.0_Patch_6_x64.part3.rar
https://uploadgig.com/file/download/69d12c6e247b799d/Cradle_SCTetra_14.0_Patch_6_x64.part4.rar
KAMAL вне форума   Ответить с цитированием
Старый 29.05.2020, 11:01   #493
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение Dassault Systemes DraftSight Enterprise Plus 2020 SP1 x64 Multilingual

Dassault Systemes DraftSight Enterprise Plus 2020 SP1 x64 Multilingual






Dassault Systemes DraftSight Enterprise Plus 2020 SP1 x64 Multilingual | 246 MB


Languages: Čeština, Deutsch, English, Français, Italiano, 日本語, 한국어, Polski, Português, Русский, Español, Türkçe, 中文 (Simplified)


The Dassault Systemes product team is pleased to announce the availability of DraftSight 2020 SP1 is major software powerful, and includes your most asked-for capabilities and functionality. DraftSight lets you create, edit, view and markup any kind of 2D and 3D DWG file with greater ease, speed and efficiency.


DraftSight is a feature-rich 2D and 3D CAD solution for architects, engineers and construction service providers, as well as professional CAD users, designers, educators and hobbyists, and includes your most asked-for capabilities and functionality.

DraftSight lets you create, edit, view and markup any kind of 2D and 3D DWG file with greater ease, speed and efficiency. Its familiar user interface facilitates a quick transition from your current CAD application.

Real design freedom is letting you work the way you want to work. It's the ability to effortlessly go from 2D drafting to 3D modeling and back again in order to optimize and maximize designs. And the capability to seamlessly integrate with other Dassault Systèmes and SOLIDWORKS solutions, including SOLIDWORKS PDM to easily manage your DWG file designs from first inspiration to final outcome.

DraftSight 2020 delivers powerful automations to save you time, improve detailing quality and reduce tedious tasks. Automatically dimension drawings and arrange dimension spacing to save hours of time per drawing, simply drag and drop drawings and blocks from 3D ContentCentral right from the DraftSight task pane, and much more.

DraftSight: A Better 2D Drafting and 3D Design Experience

Dassault Systèmes SolidWorks Corp. offers complete 3D software tools that let you create, simulate, publish, and manage your data. SolidWorks products are easy to learn and use, and work together to help you design products better, faster, and more cost-effectively. The SolidWorks focus on ease-of-use allows more engineers, designers and other technology professionals than ever before to take advantage of 3D in bringing their designs to life.


Product: Dassault Systemes DraftSight
Version: Enterprise 2020 SP1
Supported Architectures: x64
Website Home Page :
Код:
http://www.draftsight.com
Language: multilanguage
System Requirements: PC *
Supported Operating Systems: *
Size: 239.3 mb

Minimum
- 64-bit version: Windows 7 Service Pack 1, Windows 8.1, or Windows 10 (with latest Updates and Service Packs)
- 32-bit version: Windows 7 Service Pack 1, Windows 8.1, or Windows 10 (with latest Updates and Service Packs)
- Intel Core 2 Duo, or AMD Athlon X2 Dual-Core processor
- 1.5 GB free hard disk space depending on accessory applications installed
- 2 GB RAM
- 3D Graphics accelerator card with OpenGL version 1.4
- Display with 1280 x 768 pixels resolution
- Mouse
Recommended
- 64-bit version: Microsoft Windows 10 (with latest Updates and Service Packs)
- 32-bit version: Microsoft Windows 10 (with latest Updates and Service Packs)
- Intel Core i5 processor, AMD Athlon/Phenom X4 processor, or better
- 1.5 GB free hard disk space depending on accessory applications installed
- 8 GB RAM
- 3D Graphics accelerator card with OpenGL version 3.2 or better
- Full HD monitor
- Wheel mouse, or 3D mouse




DOWNLOAD LINKS:

Код:
https://rapidgator.net/file/818e027eae151d0dbcf2c77434ee563d/Dassault_Systemes_DraftSight_Enterprise_Plus_2020_SP1_x64_Multilingual.rar
Код:
http://nitroflare.com/view/874A85D77360E73/Dassault_Systemes_DraftSight_Enterprise_Plus_2020_SP1_x64_Multilingual.rar
Код:
https://uploadgig.com/file/download/b1a6602ad479d9c2/Dassault_Systemes_DraftSight_Enterprise_Plus_2020_SP1_x64_Multilingual.rar
KAMAL вне форума   Ответить с цитированием
Старый 29.05.2020, 11:38   #494
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение DipTrace 4.0 (x86/x64)

DipTrace 4.0 (x86/x64)






DipTrace 4.0 (x86/x64) | 358 MB


The Novarm software development team is pleased to announce the availability of DipTrace 4.0. This release presents major improvements to skyrocket your productivity.


DipTrace 4.0 release notes - Date: May 20, 2020
We are excited to announce the official stable release of DipTrace 4.0. After the first 4.0 Beta launch in February 2020, we kept on working on further improvement of the software.
We have completed expanding and redesigning our Standard Libraries according to IPC-7351 standard, added long-requested Teardrops feature for pad/via, trace width change and T-junctions, worked on enhancing manual routing experience (Tab for toggling between segment/trace/net selection; Del for unrouting selected traces; Clear All Copper Pours command), added a number of smaller improvements and fixed bugs.

DipTrace 4.0 contains an updated Pattern Editor module with a built-in IPC-7351 Pattern Generator tool that has already received very positive feedback. New pad shapes (round rect, D-shape) and standard layers (courtyard, component outline, component terminals) have also been warmly welcomed by our users.

With 4.0 it's possible to generate 3D models automatically based on IPC-7351 standard or component outline both in Pattern Editor and PCB Layout.
Shape/Text/Picture placement and editing tools have undergone a major revision since 3.3.1 release and now allow for some advanced options (multi-line text placement at any angle, 3 ways to build or edit arcs, smooth shape dimension editing; vectorization of images; placing text or image as void in silk screen or copper pour; creating board outline from a set of shapes, etc.).

Schematic and PCB Layout are featuring a flexible Component Marking system that allows unlimited number of markings and enables highly customizable Markings display options.
DipTrace 4.0 is optimized for 4K monitors with new sets of tool icons for 150% and 200% scale.

- IPC-7351 standard pattern type:
. pattern is generated automatically by IPC-7351 generator integrated into Pattern Editor;
. 3D model is generated on the fly in Pattern Editor and PCB Layout.
- New IPC-7351 libraries.
- UI has been optimized for 4k monitors.
- Mac OS 10.15 Catalina support.
- RoundRect and D-shape pads.
- Pad shape can be shifted from pad hole center.
- Teardrops for pads, vias, trace width change and T-junctions.
- Rotating pads by any angle without changing to polygon.
- Rotating component by any angle without changing it.
- Pad terminals.
- Segmented paste mask, solder mask by paste mask.
- Solder mask and paste mask of pads are visible in the design area and can be printed.
- Fiducial object in PCB and Pattern Editor.
- Pattern Editor has a layer panel similar to PCB Layout.
- Both Pattern Editor and PCB Layout layer panels have configurable layer order and visibility.
- Courtyard layer, DRC does not allow courtyard region to be overlayed (touch is allowed).
- Component outline layer (3D model can be built by component outline).
- Configurable Silk to Pad clearance in DRC.
- Remove silk from pads/holes/mask wizard in Pattern Editor.
- Place outline wizard in Pattern Editor.
- Similar pad numbers are allowed (in this case pads are connected inside a pattern, @ symbol before or after pad number allows to avoid warning).
- Two types of internal component connections are possible:
. one of pads should be connected or internal connection can be used as jumper for the net;
. all pads should be connected.
- Manual routing improvements:
. Routing with static vias option;
. Tab key can be used to toggle between selection of a segment, trace and net;
. Del key is used for unrouting selected traces (node to node) instead of deleting net;
. Delete Net option has been added to net submenu.
- 3 ways to build and edit arcs (3 points, center-radius-angles, start-end-radius).
- Any set of shapes can be converted to a board outline (you can place arcs, lines, poly-lines as you wish, connect their ends and convert the set to a board outline).
- Updated properties dialogs for all shapes (now can be edited by dimensions).
- Obround shapes instead of ellipses in all programs.
- Snap to other objects key points when building/editing shapes, board and copper pour.
- Multi-line text.
- "~" symbol is allowed in text (double ~~).
- Text and pictures can be rotated by any angle.
- Pictures are now vectorized and saved together with a design file.
- It is possible to etch text or picture/logo in the copper pour.
- Anchor point + Left-Center-Right, Top-Center-Bottom alignment is used for text, markings, pictures and while editing shapes.
- Cut the right angle of the shape option.
- New Component marking system in Schematic and PCB Layout:
. any number of markings can be displayed (display property is available for each field, including additional);
. free angle rotation and alignment;
. separate marking settings for assembly layer in PCB;
. custom marking font by the component;
. text with parameter property placed in Pattern/ Component Editor is counted as pattern marking (PCB/Schematic do not add additional text);
. font settings can be applied to markings placed in Component/Pattern Editor;
. move tool (F10) allows to move/rotate any text object inside a component directly in Schematic/PCB.
- Pattern origin is shown as cross + circle (options) and can be displayed by layers.
- 3 ways of building 3D models of the pattern (by file, by component outline and by IPC-7351 standard).
- Filter can be stopped at any search stage, results are displayed in real-time while searching components.
- Component properties dialog is redesigned to allow display and edit all additional fields at once.
- Name description, unique name and manufacturer fields have been added to the pattern.
- Free resizing of library/component list and additional fields in Component/Pattern Editors.
- Pattern shape precision has been improved, recounting pattern shapes by borders when you change the number of pads/dimensions in Pattern Editor.
- Pad to copper pour thermals are rotated by pad/component angle.
- Selecting object and opening its submenu from Design Manager in Schematic and PCB (right click on the item in the Design Manager).
- Groups in Component and Pattern Editors, similar to Schematic and PCB.
- Measure tool in Schematic and Component Editor.
- Properties dialog windows may change locked objects after confirmation.
- Updating PCB from Schematic keeps locked components non-existent in Schematic.
- Export all Gerber and Drill files into a zip archive with a single click.
- Configurable default filenames for drill export.

Diptrace is an ECA/CAD software to build schematic design and the printed circuit board. You can quickly create any schematics and then change it to the other formats, i.e., PCB. Diptrace allows the user to use the primary and flexible features like 3D modeling, high-speed shape-based routing, and extensive import/export capabilities. While switching from one format to another format, it also assembles the electrical components. It offers the multi-sheet and multi-level hierarchal circuits Diptrace has four modules.

DipTrace Tutorial Intro
Established in 2002, Novarm is a software development company, specializing in state-of-the-art programs for PCB professionals and hobbyists, united into DipTrace design suite.
Co-founded Novarm Limited in 2002 and started development of DipTrace software. Graduated from National Mining University as electromechanical engineer in 2003 and worked in CNC industry as CAM software developer. At the same time continued to work on DipTrace and published the first version in August 2004. Since early 2005 became full-time DipTrace developer and started to build DipTrace Team for more efficient workflow.


Product: DipTrace
Version: 4.0
Supported Architectures: 32bit / 64bit
Website Home Page :
Код:
https://diptrace.com
Language: english
System Requirements: PC *
Supported Operating Systems: *
Size: 358.9 mb

Recommended System Requirements
- Windows XP/Vista/7/8/8.1/10 (32,64-bit);
- 1 GHz Pentium III processor or equivalent;
- 1 Gb RAM
- 1,5 Gb hard disk space;
- 1024x768 screen resolution or higher;
- OpenGL/DirectX 9.0 or higher.




DOWNLOAD LINKS:

Код:
https://rapidgator.net/file/9ffd0fa44f929ae4b0ef12425d3f1ce8/DipTrace_4.0_x86x64.rar
Код:
http://nitroflare.com/view/3248D79F0D8B80E/DipTrace_4.0_x86x64.rar
Код:
https://uploadgig.com/file/download/d21380698ec76b9b/DipTrace_4.0_x86x64.rar
KAMAL вне форума   Ответить с цитированием
Старый 29.05.2020, 11:44   #495
KAMAL
Местный
 
Регистрация: 13.04.2020
Сообщений: 6,490
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
KAMAL пока не определено
Смущение DP Technology ESPRIT 2020 R1 Multilingual

DP Technology ESPRIT 2020 R1 Multilingual






DP Technology ESPRIT 2020 R1 Multilingual | 1.57 GB


Languages: English, Čeština, 中文 Simplified, 中文 Traditional, Français, Deutsch, Italiano, 日本語, 한국어, Português, Polski, Русский, Español, Svenska, Türkçe.

DP Technology announces a comprehensive product update, called ESPRIT 2020, for their computer-aided manufacturing (CAM) software. Among the most significant developments are updates to the software's computer-aided design (CAD) interfaces and new or improved solutions for specific machine tools.

ESPRIT 2020 features plentiful updates for Swiss-type machining. This technique is defined by its small, often intricate parts. Medical devices, such as bone screws, are typically manufactured on Swiss-type machines. ESPRIT's 2020 update introduces or enhances support for 200 different Swiss-type machine models, including:
- Citizen D25, which features three channels, 3x Y-axis, 3x Z-axis, B-axis front and back
- Star SV 38R, which features three channels and a B-axis
- Tsugami SS38, a chucker-convertible sliding headstock lathe with B-axis
- Tornos machines
- Seamless integration of laser cutting operations for Tsugami and Citizen
- Willemin-Macodel MT series machines

The 2020 update also includes updated support for the latest CAD software, including:
- SolidWorks 2020
- SolidEdge 2020
- PTC Creo 6
- NX 1847

Improved CAD support allows users to better design and visualize parts before manufacturing begins. CAD modeling is an integral part of designing and optimizing any new part, and different software types specialize in different modeling techniques.

Additionally, ESPRIT 2020 expands mill-turn support to the following machines:
- Index G200 and G220, featuring two and three turrets and a disk turret mounted on a B-axis
- Miyano BNE 51 MSY, featuring three X-axes and three Z-axes
- Traub TNX, featuring simultaneous independent machining with up to four tool carriers
- CMZ TTL, featuring two turrets and two spindles

Enhanced profile threading and probing capabilities round out the product release.

ESPRIT is a powerful CAM system for CNC programming, optimization and simulation - supporting the entire manufacturing process. With factory-certified post processors delivering machine-optimized G-code and ESPRIT's ability to solve unique challenges with automation solutions, ESPRIT is the smart manufacturing solution for any machining application. With world-class technical support, ESPRIT empowers you to get started quickly and keep running at top efficiency. ESPRIT is the only CAM system you'll ever need.

New version of ESPRIT 2020 includes updates to the software's CAD interfaces, allowing users to improve the design and visualization of parts before manufacturing begins. It also offers enhanced support for 200 different Swiss-type machine models, as well as improved profile threading and probing capabilities.

Discover the ESPRIT difference in 5 minutes

DP Technology Corp. is a leading developer and supplier of computer-aided manufacturing (CAM) software. Company reinforces its commitment to technical excellence by dedicating nearly 20 percent of its annual revenue to ongoing research and product development. This long-term focus has produced powerful technological innovations that have placed ESPRIT in an industry-leading position since its market launch in 1985.


Product: DP Technology ESPRIT
Version: 2020 R1 (B19.20.201.2400)
Supported Architectures: x86
Website Home Page :
Код:
http://www.espritcam.com
Language: multilanguage
System Requirements: PC *
Supported Operating Systems: *
Size: 1.57 Gb

ESPRIT 2020 System Requirements
Computer systems that meet the minimum supported hardware requirements will be able to run ESPRIT. Any hardware requirement that exceeds the minimum will improve the performance and user experience of ESPRIT.
ESPRIT Performance Specifications Example
Depending on your programming application of ESPRIT you can achieve better performance by exceeding the minimum hardware requirements. Below is an example of a system for performance with ESPRIT
ESPRIT Minimum Hardware Requirements
Processor Intel Xeon or i7
System Memory Maximum (16 GB DDR3-1866 MHz SDRAM)
Resolution 1920 x 1200
Graphics Memory +4GB OpenGL compatible
Hard Drive Notebook 250GB (SSHD), Desktop 2TB (HDD)
Operating System Windows 7 or Windows 10
Optical Drive DVD-ROM
Ports USB (required for ESPRIT security system)




DOWNLOAD LINKS:

Код:
https://rapidgator.net/file/727b1a05525c475ea5affd4d7b9ff2d3/DP_Technology_ESPRIT_2020_R1_Multilingual.part1.rar
https://rapidgator.net/file/a31ae346e3b5602628197fefa698a8bf/DP_Technology_ESPRIT_2020_R1_Multilingual.part2.rar
Код:
http://nitroflare.com/view/CD61857BF497FEF/DP_Technology_ESPRIT_2020_R1_Multilingual.part1.rar
http://nitroflare.com/view/2DAC08931C6515B/DP_Technology_ESPRIT_2020_R1_Multilingual.part2.rar
Код:
https://uploadgig.com/file/download/63309ccA1773Ef30/DP_Technology_ESPRIT_2020_R1_Multilingual.part1.rar
https://uploadgig.com/file/download/9f641e73bDf963cB/DP_Technology_ESPRIT_2020_R1_Multilingual.part2.rar
KAMAL вне форума   Ответить с цитированием
Ответ

Любые журналы Актион-МЦФЭР регулярно !!! Пишите https://www.nado.in/private.php?do=newpm&u=12191 или на электронный адрес pantera@nado.ws


Здесь присутствуют: 1 (пользователей: 0 , гостей: 1)
 
Опции темы

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход

Похожие темы
Тема Автор Раздел Ответов Последнее сообщение
SamDrivers 15.3 Full 2015 (22/3/2015) vandit Различный софт 0 22.03.2015 20:51
SamDrivers 15.3 Full - 2015 - 0.0.6 emlieu Различный софт 0 22.03.2015 19:08
SamDrivers 15.3 Full - 2015- 0.0.5 emlieu Различный софт 0 19.03.2015 20:14
SamDrivers 15.3 Full - 2015 - 0.0.2 emlieu Различный софт 0 12.03.2015 21:26
SamDrivers 15.3 Full - 2015- 0.0.1 emlieu Различный софт 0 11.03.2015 02:16


Текущее время: 13:49. Часовой пояс GMT +1.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc. Перевод: zCarot