Старый 26.06.2019, 08:16   #8881
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию Audiaire NUXX v1.05



File Size : 35.84 MB

Powerful multi-FX processor with dedicated parameter sequencer and 30 effects types.

Sequencer Powered Multi FX
Explore limitless possibilities by modifying each effect parameter in its own independent sequencer lane, on one screen. Choose from filters, delay, reverb, distortion, pitch shift, bit crusher, phaser, chorus, ring mod and more.

Nuxx can be used in two distinct modes. In its simplest form the sequencer can be hidden allowing use as a simple 6-knob multi-FX unit, or as a powerful glitch machine with real time automation on every FX parameter.

Nuxx includes 187 bespoke presets, 55 parameter sequencer lanes with complex tools for modifying lane behaviour, including addition of popular scales, arpeggios and patterns.

What's New:
Updates: official site does not provide any info about changes in this version.

HOMEPAGE
Код:
https://www.audiaire.com/store/products/nuxx/





Download From Rapidgator

Код:
https://rapidgator.net/file/17ee67793985bb9a62c8694d8e376bd2
Download From Nitroflare

Код:
http://nitroflare.com/view/0B72894CBD27312/BaDshaH_3991.rar
BaDshaH вне форума   Ответить с цитированием
Старый 26.06.2019, 08:24   #8882
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию Gramotech Pompeii v19.5.0



File Size : 1.96 MB

Pompeii gives you ultimate control over the loudness of your sound through an exquisitely designed interface. Perfect for mastering, Pompeii can give your sound that necessary final touch to get it ready for the world to hear.

Pompeii is a multiband dynamics processing plug-in.
It was designed to give you ultimate control over the loudness of your sound. To achieve this, Pompeii splits your signal into four, user configurable bands and applies either compression or expansion to the band before mixing them back together. Pompeii also features a master band which is applied after the four other bands and applies to the full frequency range.

Pompeii features all of the controls you would expect to find on a dynamics processor:

Threshold
Controls the level at which the dynamics processing acts. Levels above this will be reduced by the compressor, levels below this will be reduced by the expander.

Ratio
How much the level is reduced.

Knee
Controls how smooth the transition is between the reduced level and the untouched level about the threshold.

Gain Reduction Limit
Sets the maximum amount of reduction.

Attack
The time it takes the envelope to meet peaks.

Release
The time it takes the envelope to decay after peaks.

Gain
The makeup gain applied after the processing.

Mix
How much of the processed signal is passed to the output.

Each band also shows the input and output levels for that particular band so you can see exactly how your sound is being processed.

What's New:
Updates: official site does not provide any info about changes in this version.

HOMEPAGE
Код:
https://gramotech.co.uk/products/pompeii/





Download From Rapidgator

Код:
https://rapidgator.net/file/57300576bae907ca0985f3ed6c0a30db
Download From Nitroflare

Код:
http://nitroflare.com/view/ABA5F0DFE0BBB06/BaDshaH_3990.rar
BaDshaH вне форума   Ответить с цитированием
Старый 26.06.2019, 16:46   #8883
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию ReviverSoft Driver Reviver 5.29.0.8 Multilingual



File size: 38.05 MB

Driver Reviver is an industry leading PC driver update utility that will help you update your computer drivers in a few easy clicks! Driver Reviver uses one of the largest and most comprehensive Driver Database available. It ensures that it will always find the most recent drivers for your PC and other hardware devices. This program will scan your PC to identify out of date and obsolete drivers. Driver Reviver can quickly and easily update the out-of-date drivers using original manufacturer drivers to restore optimum performance to your PC and its hardware. It will maximize the functionality and life of your PC and its devices. Driver Reviver is unbelievably easy and quick to use and includes safety features like automatic backups, restore wizard, exclusions, scheduler and more to keep your computer in good shape.

Hardware Drivers are essential software applications that enable devices, which are connected to your PC, to communicate with your operating system and other software on your computer. These Drivers allow your software to access the full functionality and feature set available for each piece of hardware connected to your computer.
As both your operating system and the software applications running on your PC are updated, new Drivers are needed to ensure that your hardware can remain fully functional within its new environment. Many manufacturers do not contact you to advise that a new Driver has been released for your hardware. You therefore might be unaware that new, updated Drivers are available for your system, and you may be missing out on some additional new functionality, features or security patches for your system.

Ensures your PC hardware is performing at optimum levels
By keeping your drivers updated, you are ensuring that you continue receiving updates containing bug fixes, performance improvements, and potential new features from the manufacturer.

Eliminates the risk of downloading a faulty or infected driver
Installing the wrong Driver or malware could render your PC inoperable and potentially put you at risk. Driver Reviver ensures accurate detection and consistently delivers the correct drivers.

Saves you time
It can take numerous hours to track down each Driver for each single piece of hardware connected to your PC. Driver Reviver accomplishes this in minutes through a quick scan and update process.

Whats New:
Updates: official site does not provide any info about changes in this version.

HOMEPAGE
Код:
http://www.reviversoft.com/





Download From Rapidgator

Код:
https://rapidgator.net/file/2b59cfae25f82b6ef54b10763ee065e9
Download From Nitroflare

Код:
http://nitroflare.com/view/7FBCF5B816C5B8F/BaDshaH__Driver.Reviver.5.29.0.8.rar

BaDshaH вне форума   Ответить с цитированием
Старый 26.06.2019, 16:50   #8884
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию VSDC Video Editor Pro 6.3.5.5/6.3.5.6 (x86/x64) Multilingual



File size: 135 MB

The video editor is intended for editing video files and creating videos of any complexity involving various visual and audio effects. The program offers rich functionality and yet has a simple and intuitive interface, allowing you to create videos with a bare minimum of efforts.

Non-linear video editor
Our editor is a non-linear tool. This means that unlike in most other editors, where scenes come one after another in a linear sequence and certain order, our software allows objects to be placed in any position on the timeline and have any size. Besides, various parameters, shape and position of objects can change arbitrarily over time.

Visual and audio effects
You can apply various visual and audio effects to your videos to achieve the necessary result. Since the number of available visual effect is very high, they are split into five categories for ease of navigation: color correction, object transformation, object filters, transition effects and special fx.

Blending modes and Instagram-like filters
One more way of changing the look of your video image according to your preferences is color blending. Using a wide array of adjustable parameters, you can attach a unique professional style to your video. Newbies or those, who would like to save time, can benefit from stylish Instagram-like filters applied in one click.

Masking
VSDC Free Video Editor allows for creating different shaped masks for hiding, blurring or highlighting certain elements in your video. You can use it to apply special effects inside or outside the masked area. One of the most common reasons for masking are to blur a face to protect the identity or remove unwanted marks.

Subpixel accuracy
Objects in a scene are positioned with subpixel accuracy, which makes for smooth animation, rotation, transformation and precise relative positioning.

Support of popular formats
Our software supports virtually all video, image and audio formats and codecs. That is why you won't need any additional conversion tools to edit your files, as is often the case with other programs.

Creation of videos for specific multimedia devices
Thanks to a large set of preconfigured profiles, you can easily create videos for most popular multimedia devices, such as DVD players, iPod/iPhone/iPad, PSP, any smartphones and regular phones, Sony PlayStation, Xbox, Zune, Archos, iRiver, Creative Zen, Blackberry, MP4 players and many others.

Working with charts
You can create diagrams of different kinds, including 3D diagrams: Bar, Stacked Bar, Point, Bubble, Line, Scatter Line, Fast Line, Step Line, Spline, Area, Spline Area, Stacked Area, Stacked Spline Area, Range Bar, Gantt, Pie, Pie 3D, Torus 3D, Radar Point, Radar Line, Radar Area, Radar Spline, Radar Spline Area, Funnel, Pyramid, Pyramid 3D, High Low, Candle Stick. These objects can be based on dynamically changing data of different types. Besides, the appearance of diagrams is fully customizable (appearance of charts, coordinate axes, user-defined axes, legends, names of charts and axes, lines, labels and other elements), which will help you tailor them to your specific needs. Integrated color themes make it possible to quickly change the way your charts look.

Video library (to be included in the next program release)
The editor software lets you create your own library of multimedia files with brief or detailed descriptions. This will help you organize your video collection and simplify access to the necessary files.

Built-in DVD burning tool
The editor comes with a DVD burning tool, allowing you to easily burn the results of your work to optical discs.

Video File Converter
The application is designed to quickly convert video files from one format to another. It has some basic features for editing videos: removing unneeded segments, splitting your video into parts, and merging several files into one.

Desktop video capture
The video editor features a desktop video capture utility that saves captured footage to a video file for subsequent processing in the editor.

Video capturing
Another feature of the our editor is the ability to capture video from various video tuners, webcams, IP ?ameras and save the captured footage on your computer in an arbitrary format for subsequent editing.

Whats New:
The '360 to 2D' option added to 'Video effects' that allows users to preview and edit 360° videos.
The '3D to 2D' option added to 'Video effects' that allows users to preview and edit 3D videos.
'Transition effects' templates made available for editing.
Background templates for Halloween, Christmas and other special occasions made available for download from VSDC Store.
A format of the timeline settings modified with three modes of saving the scale available.
New group operations to make objects the same width and height added.
An option to save a scene together with its output resources introduced.
New parameters added and minor enhancements made to Audio Spectrum.
Minor bugs fixed:
errors with processing MKV files removed;
MP3 codec updated;
crashes while processing large numbers of text objects prevented;
dpi errors fixed in the Voice recorder;
wrong object location after Movement removal fixed.

HOMEPAGE
Код:
http://www.videosoftdev.com/





Download From Rapidgator

Код:
https://rapidgator.net/file/cba8ff1e2e869896e87042b08f9cf7cc
Download From Nitroflare

Код:
http://nitroflare.com/view/51F6F92B5815483/BaDshaH_VSDC_Video_Editor_Pro_6.3.5.6.rar

BaDshaH вне форума   Ответить с цитированием
Старый 26.06.2019, 16:54   #8885
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию PUSH Video Wallpaper / Video Screensaver 4.32



File size: 24.17 MB

PUSH Video Wallpaper will immensely boost the entertainment level of your desktop by allowing you to play videos, youtube videos and animated gifs as your wallpaper in the background. You can apply Windows Vista Ultimate Dreamscene video wallpapers on all the latest operating systems such as Windows 10, 8.1, 8, 7. When your computer is inactive it doubles as a video screensaver too, so you can watch your favorite videos.

RELEASE NOTES
• official site does not provide any info about changes in this version.

HOMEPAGE
Код:
https://www.push-entertainment.com/





Download From Rapidgator

Код:
https://rapidgator.net/file/46ba3da984f55b6d6c29bf8936cf0c97
Download From Nitroflare

Код:
http://nitroflare.com/view/8DBBF5059AD9353/BaDshaH_PUSH.Video.Wallpaper.4.32.rar
BaDshaH вне форума   Ответить с цитированием
Старый 26.06.2019, 16:56   #8886
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию ScreenHunter Pro 7.0.1019



File size: 122.92 MB

ScreenHunter 7 is an award-winning solution to all-in-one image capture, print, edit and video recording. It's the total capture solution to save you time and boost productivity. Also with auto-scroll web pages, auto-capture, webcam and video screen capture. It captures what you see as an image even whilst recording. It has an easy-to-use interface. All the features are visible in 4 easy-to-use tabs, so everyone from beginners to professionals can use ScreenHunter 7. The process is simple, the options are easy to manage, and the results are flawless. Powerful and intelligent, ScreenHunter has proven to be an incomparable helper of your business.

The software supports full screen capture up to 6K for multiple monitors and records 4K videos for a single monitor. Supports frame rate up to 100 fps.

Using DirectX lets ScreenHunter 7 produce professional quality videos. It is a perfect tool for recording movies and courses online.

Moreover, ScreenHunter 7 captures and records windows covered by another window or even minimized windows. Optimal for automatic or scheduled captures and recording.

Furthermore, you can show your webcam anywhere at any given time, so you can integrate it into your recording the way you want.

ScreenHunter Pro 7 is the most advanced version with all the necessary tools included for your screen capture needs. It's the total capture solution to save you time and boost productivity. With this tool, you can capture screen to image or PDF files, immediately see the benefits of numerous time-saving features and deliver the highest quality screenshots. As well, it offers easy-to-use user interface and maximum flexibility for a more interactive capture experience.

Capturing Features
• Rectangular area
• Adjustable rectangle
• Object / Window
• Auto-scroll
• Multi-object
• Text
• Active Window
• Fixed area (user defined)
• Specific window (lock-in window)
• Full screen
• DOS program
• DirectX / Screen saver
• Movie / video
• Freehand
• Round area (Ellipse)
• Round Rectangular area
• Polygon
• Web capture
• Scanning images

Addition Features
• Mouse pointer
• Multiple monitors
• Transparent window
• AutoText (date/time stamps, note)
• Watermark
• Border

Timing Features
• Delayed capture
• Timed auto-capture
• Scheduled auto-capture
• Recurring capture

Viewing and Editing Features
• Image editing, adding text & annotation
• Advanced image processing
• High-quality zooming, resizing & cropping
• Viewing 100 images & conversion
• Drag & drop images from desktop

Saving Features
• Automatic naming and saving to files
• Clipboard
• Auto-email
• Auto-scale
• Saving in the smallest file size
• Optimized JPEG, GIF and PNG
• High quality and transparent GIF
• Saving to TIFF

Other Features
• Screen Color Picker
• System tray
• Zoombox
• Flexible hotkey
• Multiple hotkey
• Direct printing
• Wysiwyg printing
• Developer support

RELEASE NOTES
Код:
http://www.wisdom-soft.com/info/version_history.htm
HOMEPAGE
Код:
http://www.wisdom-soft.com/





Download From Rapidgator

Код:
https://rapidgator.net/file/6224bbc2b53c750b9a3ce2a023d151dd
Download From Nitroflare

Код:
http://nitroflare.com/view/CF8C61DE4D5D0BB/BaDshaH_ScreenHunter.Pro.7.0.1019.rar

BaDshaH вне форума   Ответить с цитированием
Старый 26.06.2019, 17:08   #8887
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию JRiver Media Center 25.0.68 Multilingual



File size: 76 MB

JRiver Media Center - all-in-one media management app turns any Windows PC into an entertainment hub for complete control of your digital media: Audio, Video, Images, and Television. It connects PC to stereo, TV, remote control devices, digital cameras, scanners, and portable MP3 players. It plays all media, rips, burns, and organizes all your music, images, and video. MC encodes and plays all popular media formats. Powerful utilities include Media Server for streaming music and images to remote PCs. Media Center is more than a world class player. It's also a Media Network, a whole house music, movie, TV, and photo solution. The leader in audiophile quality sound. The most powerful media database available; an essential tool for large collections.

Features:

Audio
* Native support of DirectShow DSP filters
* Audiophile - WASAPI exclusive output using high-end USB DACs
* Audiophile - Added ability to play files from memory instead of disk
* Audiophile - Support for high end USB DAC's with WASAPI
* Headphone DSP makes listening more natural and comfortable.
* SoundcardSwitch command for the launcher, allows soundcard selection
* 3D album view adjusts text size to display more tracks when necessary
* 3D album view allows playing, adding, shuffling, and adding as next to play

Images
* Image Preview allows zoom from a thumbnail to rotate, delete, compare, edit, and more
* Image thumbnail frames (optional)
* Photoshop PSD file support
* Single command copy / send to an editor like Photoshop, and stack new image with original

Video
* Video tagging using sidecar files
* Chapter Support for MKV and MP4
* Chapters added to On Screen Display
* Info Panel displays metadata

Television
* Added new "watched" column to metadata
* EPG can automatically retrieve XMLTV data
* Automatic correlation of XML channel names and MC channel names
* Info Panel displays metadata, including TV program art
* TV program art from YADB

Theater View
* Watch Hulu and YouTube from Theater View
* Customizable nested views in Theater View
* Customizable File Info panel to display metadata
* Speed and quality enhancements
* Custom backgrounds
* Touch screen support
* On screen clock

Remotes and Servers
* Wiki articles: Remotes and Servers
* Remote Relay using IR transceivers for controlling a set top box or receiver
* Remote Setup Wizard
* Media Center Remote learning and blasting
* Media Center can connect to another Media Center to act as a remote (TRemote)
* New HID remote control plug-in - supports shortcuts with keyboard, mouse, & gamepad
* Remote control with REST based Web Service Interface in Library Server
* Library Server supports read and write to allow for shared, multi-user database access
* DLNA added to the UPnP Server
* Library Server clients can write changes back to server
* Library Server connections allow playback on server as Playing Now zones

Whats New:
1. Changed: Tagging no longer runs on URLs or Radio Paradise files.
2. NEW: DLNA: HDCD info passed via JRiver specific DiDL to enable processing by a MC renderer.
3. Fixed: Files could get erroneously tagged during playback.
4. Fixed: Picking "Export Playlist..." from the view header menu would reset the selection.
5. Fixed: Encoder settings could get saved to the registry as the default profile and cause DLNA playback issues between L16 and WAV.

HOMEPAGE
Код:
http://www.jriver.com/





Download From Rapidgator

Код:
https://rapidgator.net/file/31b689a19548a6c5a912c5e78311aa26
Download From Nitroflare

Код:
http://nitroflare.com/view/69E8ECAB8EF7B9C/BaDshaH_MediaCenter250068.rar
BaDshaH вне форума   Ответить с цитированием
Старый 26.06.2019, 17:11   #8888
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию MindGenius 2019 8.0.1.7109



File size: 128 MB

Create complex business idea maps, plan strategies, tasks, projects and events with this powerful and intuitive piece of software. If you are a business manager who wants to increase your own and your employees' productivity, you may benefit from a tool like MindGenius Business. It can help you create mind maps, brainstorm ideas, create presentations, manage tasks and projects.

Create detailed mind maps
The application enables you to create original maps, but also offers numerous templates, organized in relevant categories, that are best suited for certain tasks.
You can modify the map layout to better display the necessary information, and there are multiple layouts to choose from: diagram, output or input tree, outline, affinity, organogram and funnel.
You can expand and contract various branches and assign multiple types of information to each of them. The program allows you to insert notes, attach files, add hyperlinks, images or even link a branch to another map.

MindGenius Business includes a built-in map explorer, that you can use to view the project in an expandable tree view that allows you to quickly navigate between various map levels.

Assign tasks and resources to various branches
Various tasks can be assigned to particular branches, to help you manage activities that need to be performed, and every branch can be allocated certain resources. You can specify a task's start and due dates, priority, status, duration and cost.
The information can be viewed as a resource map, that offers a detailed representation of the tasks and resources assigned to various branches.

Create presentations
MindGenius Business allows you to design interactive presentations that are automatically updated when data in the associated map is modified.
You can play the resulting file within the program and it offers an interesting feature that allows you to edit sections from your map while a presentation is taking place.
The created presentation can also be exported to PDF or PPT, so that it can be viewed in Microsoft Powerpoint.
Overall, MindGenius Business is a comprehensive and intuitive application aimed at business owners who want to increase their company's productivity by creating mind maps, organizing projects and sharing information efficiently.

New in MindGenius 2019:
Social Media Sharing
Now you can send a picture of a MindGenius map directly to Twitter or Facebook, automatically generating a post.

Sharing Maps with the MindGenius Community
If you have a map that could be useful to other MindGenius users, now it's easy to share it. On the Share tab, click the button that says, "To MindGenius." We'll make your map available as a template on our website.

Dynamic Views
HTML export enables you to share your mind maps with people who don't have MindGenius. The HTML version opens in any browser and includes the Map Explorer feature that lets people select specific branches to view. We've improved HTML export for 2019.

Outlook Integration
Now you can convert your MindGenius project tasks into Outlook tasks. You also can do the same conversion for team members when you assign tasks to them.

Easier Export to MindGenius Online
You can start a project plan in MindGenius, take advantage of its many project management features, and then bring your entire project team into the project using MindGenius Online. It's the best of both worlds: Get in-depth functionality with MindGenius and easy collaboration among your project team with MindGenius Online.

Hide Project Information on Maps
Now you can hide most project information on mind maps to enable easier navigation, more flexible plan revisions, and a more compact mind map. When a map displays project information, just click the Task Info button on the Share tab to de-select it. All project information except resource assignments will be hidden.

Font Templates
There's a new way to give your mind maps a different look: Font templates let you pick from several text fonts when you launch a new map.

Whats New
Код:
https://www.mindgenius.com/mindgenius-2019/
HOMEPAGE
Код:
https://www.mindgenius.com





Download From Rapidgator

Код:
https://rapidgator.net/file/7abb7ee38cb94ea57e6c0c56806aecc2
Download From Nitroflare

Код:
http://nitroflare.com/view/55B06C43BF5F4C9/BaDshaH_MindGenius_2019_8.0.1.rar

BaDshaH вне форума   Ответить с цитированием
Старый 26.06.2019, 17:18   #8889
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию Trimble Tekla Tedds 2019 SP1 21.1.0 With Enginnering Librarie June 2019



x86,x64 | File Size: 724 MB

Tekla Tedds powerful software for automating calculations and building construction. Handheld computing time and working with spreadsheets (Spreadsheet) Forget boring, with Tedds all the things you can do automatically and in real time.

Comprehensive and extensive calculations, it is quick and easy and will prevent human errors. Safes are ready to documents according to corporate standards such as letterhead and custom logo and saves a lot of time and improve the delivery of documents and will be reported. This release requests valued customers and a lot of features and enhancements have been added to the program.

Facilities and software features of Tekla Tedds:
-Access to a large range of library construction and development
-Illustrated inputs and outputs in graphical form and live
-Eliminating the need for software analysis / analysis of
-The interface is simple and compelling
-Ability to work with Microsoft Word (word) - a renowned software and documentation standards
-Construction frameworks such as beams and skeletal analysis and ...
-Use only one solution for all common materials and components
-Creating transparent calculations for Czech They simply
-Compare the different options and rapid application design changes
-Consistent and non-contradictory documentation
-Improve the quality assurance process
-Updated regularly and get the latest calculations and scripts
-Writing, storage and distribution of custom calculations You
-A range of powerful development tools
-Reducing the risk of traditional computing methods
-Update your calculations with just a push of a button
-Share your knowledge of distributed computing and business.
-The notes and the various documentation projects
-Customize level of detail when output
-Various output formats including pdf
-Archiving your calculations and store cards in a server
-Linking parts of graphics computing section Tedds

System Requirements:
-OS:32-bit or 64bit Microsoft Windows 7 SP1/8.1/10 Operating systems must be running the latest service packs / updates.
-CPU:Multi core Intel i3 Series or above, Xeon or AMD equivalent Highest affordable performance recommended.
-Memory:2GB Memory requirements are dependant on document content.
-Graphics:1920 x 1080 resolution 1GB or higher of dedicated RAM.
-Disk space:1GB or more of free space for installation. Operational disk space requirements are highly dependant on model content.
-Internet connection: Required for access to Online Services and some documentation.
Microsoft Word: 32-bit or 64-bit of Microsoft Word 2010, 2013, 2016 or 2019.
-Microsoft Word needs to be fully service packed.

Important:
If you are running a 64-bit version of Windows you will require both updates.

WHATS NEW:
Tekla Tedds 2019 Service Pack 1 Release notes:

General:
-Enhanced calculation performance, reducing the calculation time by up to 50%, depending on the calculation.
-Tekla Support Tool - Updated the message prompt for 'Save document before sending' to include the option to cancel.
-Fixed the Tedds Setup Wizard not showing the full text of some labels in the user interface.
-Enhanced the 2D analysis solver so that density values are automatically factored by g_{acc} when using the US locale so that the conversion factor does not need to be included in the Calc Items which define the available materials.
-Fixed the Engineering Library documentation included in Tedds 2019 actually being the old Tedds 2018 documentation.

Tedds Application:
-Fixed the 'Send To Tedds for Word' command from working on some PC's because the TeddsForWord.tlb can not be loaded.
-Enhanced so that the 'New Calculation dialog' can show and execute embedded file items which allows users of the Tedds application to access the Tedds batch design.
-Fixed the 'Login' indicator being shown on the ribbon partially overlapping the window caption if the Windows text size setting was greater than 100%.

Tedds for Word:
-Fixed 'Export to PDF' command not working when using Microsoft Office 64-bit edition.
-Fixed the Interface Designer in Tedds for Word showing the main window at the default location before moving the window to the remembered location causing the main window to appear to jump from one location to another.
-Enhanced all the Calc Example commands to allow examples to be read from a library when the examples do not have consecutive Id's, up to 10 consecutive examples are allowed to be missing between any two examples.
-Enhanced the dialog used to select Calc Examples so that the display name for each example in the list is now prefixed with the examples short name which includes the example Id.
-Fixed error message 'AutoExec error -214024809: Value does not fall within the expected range' appearing when Tedds for Word was loading which then caused the Tedds Add-In to fail to load, if the shortcut to the master template could not be created.

Writing custom calculations:
-Enhanced the 2D analysis solver to include functions for determining which load case or load combination a max/min result occurred in.

-SolvGetMaxShearLoadContext, SolvGetMinShearLoadContext
-SolvGetMaxShearLoadIndex, SolvGetMinShearLoadIndex
-SolvGetMaxMomentLoadContext, SolvGetMinMomentLoadContext
-SolvGetMaxMomentLoadIndex, SolvGetMinMomentLoadIndex
-SolvGetMaxAxialForceLoadContext, SolvGetMinAxialForceLoadContext
-SolvGetMaxAxialForceLoadIndex, SolvGetMinAxialForceLoadIndex
-SolvGetMaxDeflectionLoadContext, SolvGetMinDeflectionLoadContext
-SolvGetMaxDeflectionLoadIndex, SolvGetMinDeflectionLoadIndex
-SolvGetMaxAxialDeflLoadContext, SolvGetMinAxialDeflLoadContext
-SolvGetMaxAxialDeflLoadIndex, SolvGetMinAxialDeflLoadIndex

-Improved calculation user interface buttons which include an image on the button. When the button is too small to show the image with the normal padding to the left of the image the image will be automatically aligned closer to the left edge of the button in order to improve the chance that the image will fit on the button face.
-Fixed the Interface Designer sizing the main window incorrectly if the windows text size setting is greater than 100%.
-Fixed Interface Designer Pro crashing when attempting to move the first control in the tree upwards

Tedds Open API:
-Enhanced the Tedds API Tester application to allow the user to browse for the source calculation using the standard Select Calc Library and Select Calc Item dialogs.

Tekla Tedds Engineering Library June 2019:

2D analysis:
-Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
-Enhanced to allow a custom section data list to be defined for selecting the section properties.
Updated output to increase accuracy of values in sections table to 1 decimal place.
-Amended Eurocode combinations for combination generator to omit 'Quasi' combinations when material is timber.

Frame wizard:
-Enhanced to allow a custom section data list to be defined for selecting the section properties.
Truss wizard
-Enhanced to allow a custom section data list to be defined for selecting the section properties.
-Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Foundation analysis & design:
-Amended calculation to allow users to set punching shear stress factor, b.
-Added check box to allow design preview results to be disabled.
-Made minor adjustments to output of plain concrete foundations.

Reinforcement schedule:
-Adjusted minimum length of dimension B for shape code 29.

Steel beam analysis & design:
-Steel member design calculation superseded.
-Corrected the calculation of the design bending resistance moment for Slimflor beams.
-Corrected the effective length factors used when loads are classified as destabilising.

Steel member analysis & design:
-Corrected output summary tables for calculations with multiple design sections.
-Corrected issue related to columns in 2D analysis models.
-Amended calculation to automatically assign an appropriate steel grade when switching between HC or HR and other section types.
-Changed default steel grade to 'S355'.
-Changed calculation to use 'creator' method to set up initial analysis model.

USA:
-Masonry wall panel design (TMS/MSJC)
-Masonry lintel analysis & design (TMS/MSJC)
-Masonry lintel design (TMS/MSJC)

Enhanced design in accordance with TMS 402/602-16:

2D analysis:
-Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
-Enhanced to allow a custom section data list to be defined for selecting the section properties.
-Updated output to increase accuracy of values in sections table to 1 decimal place.

Frame wizard:
-Updated for US design to use NDS data lists rather than data tables.
-Enhanced to allow a custom section data list to be defined for selecting the section properties.

Truss wizard:
-Updated for US design to use NDS data lists rather than data tables.
-Enhanced to allow a custom section data list to be defined for selecting the section properties.
-Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Steel member analysis & design:
-Corrected output summary tables for calculations with multiple design sections.
-Changed calculation to use 'creator' method to set up initial analysis model.

Wood ledger design (NDS):
-Corrected ASD load combination number 4 in ASCE7-10.

Australia:
-Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
-Enhanced to allow a custom section data list to be defined for selecting the section properties.
Updated output to increase accuracy of values in sections table to 1 decimal place.

Frame wizard:
-Enhanced to allow a custom section data list to be defined for selecting the section properties.
Truss wizard
-Enhanced to allow a custom section data list to be defined for selecting the section properties.
-Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Steel member analysis & design:
-Corrected output summary tables for calculations with multiple design sections.
-Changed calculation to use 'creator' method to set up initial analysis model.

Canada:
-Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
-Enhanced to allow a custom section data list to be defined for selecting the section properties.
-Updated output to increase accuracy of values in sections table to 1 decimal place.

Frame wizard:
-Enhanced to allow a custom section data list to be defined for selecting the section properties.

Truss wizard:
-Enhanced to allow a custom section data list to be defined for selecting the section properties.
-Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Europe:
-Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
-Enhanced to allow a custom section data list to be defined for selecting the section properties.
-Updated output to increase accuracy of values in sections table to 1 decimal place.
-Amended Eurocode combinations for combination generator to omit 'Quasi' combinations when material is timber.

Frame wizard:
-Enhanced to allow a custom section data list to be defined for selecting the section properties.
Truss wizard
-Enhanced to allow a custom section data list to be defined for selecting the section properties.
-Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Foundation analysis & design:
-Amended calculation to allow users to set punching shear stress factor, b.
-Added check box to allow design preview results to be disabled.
-Made minor adjustments to output of plain concrete foundations.

Steel beam analysis & design:
-Steel member design calculation superseded.
-Corrected the calculation of the design bending resistance moment for Slimflor beams.
-Corrected the effective length factors used when loads are classified as destabilising.

Steel member analysis & design:
-Corrected output summary tables for calculations with multiple design sections.
-Corrected issue related to columns in 2D analysis models.
-Amended calculation to automatically assign an appropriate steel grade when switching between HC or HR and other section types.
-Changed default steel grade to 'S355'.
-Changed calculation to use 'creator' method to set up initial analysis model.

SCREENSHOTS
[Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]

HOMEPAGE
Код:
https://tekla.com/





Download From Rapidgator

Код:
https://rapidgator.net/file/954d2a461869714d3808db47271162ef
Download From Nitroflare

Код:
http://nitroflare.com/view/788BDCAA62433A4/BaDshaH_Trimble.Tekla.Tedds.2019.SP1.21.1.0.rar

BaDshaH вне форума   Ответить с цитированием
Старый 27.06.2019, 07:18   #8890
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию Amped FIVE Professional Edition 2019 Build 13609



File size: 577.7 MB

Amped FIVE is the leading forensic image and video enhancement software and is acclaimed for its simplicity, ease-of-use and completeness. Amped FIVE is specifically designed for investigative, forensic, military and security applications. Its primary purpose is to provide a complete solution to process and restore, clarify, and analyze images and video in a simple, fast, and precise way.

Amped FIVE is used by the world's top forensic labs, law enforcement, government, military, and security organizations. Municipalities, court experts and private companies working in the surveillance and forensic fields also benefit from this revolutionary solution.

Amped FIVE is not a simple one-click video enhancement tool with limited settings or just a plug-in for photo editing software. It's a complete software solution that addresses any possible need in the analysis of images and videos for investigations, surveillance, and forensic applications. With Amped FIVE, a forensic investigator can import and convert footage, analyze its format, clarify content, take measurements of people or objects and then generate a technical report for the courtroom.

The complete workflow
• Import any type of image, video or sequence of images. If the video is an unsupported proprietary DVR format we can easily import it in FIVE with no loss of quality (uncompressed ) with the new DVR capture tool.
• Analyze specific details of your images (like EXIF metadata) and your videos (like video codec and encoding type of every single frame).
• Speed workflow on long videos by locating the frames of interest with the new motion detection and select only the useful ones either in an interval or in random positions.
• Process the frames combining more than 70 available filters in unlimited ways, in order to restore specific defects or clarify image features.
• Take specific linear and 3-dimensional measurements on the images or video frames.
• Save the result of the processing as image, video or sequence. You can even show side by side every original frames with its enhanced version to illustrate your work.
• Automatically generate a report containing the scientific methodology of the processing and all the processing steps. The report provides the scientific references for each filter used, the settings, and specifics to that particular frame or image. This reporting feature is extremely valuable for US users in Frye or Daubert states.

50 things you can do with FIVE
Load, save, process, and analyze single images, sequences of pictures, or videos from a VMS or external source using the same methodology and software.
Instant results: add, configure, move, and modify an unlimited number of filters, in real time even while playing video.
Automatically apply the same filters sequence to different files to avoid resetting all filters for different images from the same source or environment.
Apply the filters only to a region of interest of the image, or select frames of interest in a sequence.
Quickly seek for events in a long duration video with the integrated motion detection filter.
Automatically remove duplicates or mismatched frames.
Automatically demultiplex multi-camera video feeds.
Flexibility with technology: choose between classical standard techniques or latest state-of-the-art algorithms.
Precise control over images: operate with pixel level precision on selections and measurements on images. Most of the filters can work on the whole image, on a static selection or can automatically track a moving target.
Crop quad multiplexed videos.
Document evidence that wins: Amped FIVE can automatically generate detailed reports so that the investigations process is clearly documented. The report documents scientific methodology and includes all the technical details of the processing and relevant frames and processing steps selected by the user. This is something mandatory for Frye or Daubert states in the United States
View original and processed image or video side by side to easily show the results of your work.
Hide sensitive details in the video by blurring, darkening or pixelating selected areas.
Highlight sensitive details in the video blurring, darkening or pixelating selected areas.
Load image files from the most common formats, such as bitmap, jpeg, tiff, targa, jpeg2000, png.
Load video files from almost any digital format, sourced from NTSC, PAL and almost any other system such as mobile phones and internet content; users can decode most video formats by using internal libraries and codecs.
Amped FIVE's complete internal library allows decoding even if your system does not have the required codecs installed.
Choose the video decoding engine to use for every single file. FIVE is the only tool which integrates all video frameworks available on Windows (DirectShow, Video For Windows, QuickTime, FFMS, FFMPEG).
Visualize the type of encoding of the current frame (I, P, B).
The customizable player allows to define personal frame step for faster seeking or to use the mouse wheel as a jog control.
Process a live feed from any DirectShow compatible device.
Amped FIVE is the only video enhance system integrated with VMS systems. For Milestone XProtect users, FIVE allows to process live stream, archived video or exported files in native format without any conversion or quality loss.
For unsupported proprietary DVR formats, FIVE integrates a very easy tool that allows to capture the screen without any loss of quality.
Convert a sequence of static images to present and control as if it were video. Transcode video to a different format or transform it into a sequence of images or vice versa.
Multiple video frames may be selected in either a consecutive or random sequence.
FIVE is secure. You can easily check for unauthorized modifications by verifying the file hash-code to maintain strict evidence handling procedures to avoid contamination that could lose a case.
Verify image EXIF and hash-code data.
Standard image editing features allow the user to instantaneously apply basic editing functions such as crop, flip, color to grayscale conversions, channel extraction, zoom and image rotation.
Correct geometric distortions caused by wide angle lenses. Amped FIVE also allows the user to convert images taken from an omnidirectional camera to a panoramic format.
Correct the perspective in order to see the picture of the scene from a different angle.
Resize the image with advanced algorithms, which ensures a higher definition than would be obtained with common interpolation algorithms used in other software.
Convert an interlaced video into a progressive one without loss of information.
Shift the fields of an interlaced video to view better moving objects.
Improve contrast and brightness manually, adjusting intensity curves, or speed workflow with automatic enhancement algorithms.
Analyze images with various threshold and edge detection filters.
Measure real world distances, heights, and lengths from images or video frames using FIVE's advanced measuring tool.
Improve image details (unsharp masking, laplacian sharpening).
Reduce noise (averaging, Gaussian, median, bilateral, Wiener smoothing filters).
Apply custom kernel filters.
Reduce compression artifacts with deblocking algorithm.
Remove interferences or image background (such as banknote watermark) with Fourier filter.
Correct optical and motion blur resulting from fast movement or lack of focus.
Correct the blur caused by air turbulence on long range surveillance videos.
Remove noise from a video with temporal smoothing and frame integration.
Improve shaking video with local or global image stabilization.
Correct and modify the camera viewpoint in different frames with perspective alignment.
Improve the resolution of the frames with a super resolution algorithm.
Improve a video with bad weather conditions (fog, rain, flat light, sandstorm, etc.).
Improve backlight images.
View 360 dome camera images as panoramic.

WHATS NEW:
- New Tool: Copy and Verify, to quickly and reliably acquire evidence files.
- Milestone Archive: updated the decode library to latest available version (2019R1), improves the compatibility with videos exported from recent Milestone Protect versions.
- Unroll: the cut point is now configurable using parameter "Start Angle".
- Measure 1D/2D: added the ability to hide lines and measurements.
- Add Text: added new macros $ORIGINALPOSITIONTIME and $ORIGINALPOSITIONFRAMES, which includes reference to the timing of the original frames position in the video.
- Add Text: enhance $POSITIONTIME macro to support timestamp-based video formats (example: Milestone).
- Add Timestamp: added a new parameter to adjust the frame rate according to the user-defined start/end timestamps.
- Timeline: changes the playback speed when inputs have different frame rates.
- History Panel: a chain name can now be edited by double-clicking on it.
- History Panel: navigating with up/down arrow keys now updates the Viewer Panel accordingly.
- Player Panel: Speed and Volume sliders now exhibit a more intuitive (non-reversed) response to mouse wheel scrolling.
- Export PDF: fixed a bug that was preventing the last frame from being included in the PDF.
- Milestone Archive: fixed a bug that was causing incorrect video length to be reported in File Info.
- Bookmarks Panel: fixed a drag-and-drop bug that caused partially incorrect text ("null" instead of "frame") in the default description.
- Contrast Brightness: fixed a bug that caused unnecessary rounding of decimal-valued parameters (brightess=-99.1 looked the same as -99.0).
- Player Panel: fixed a bug that caused very slow GUI response when playback speed is set too high.
- History Panel: fixed a bug that caused an error after the cut-and-paste of a filter (copy-paste was unaffected by the bug).
- Video Mixer: fixed a bug that was inhibiting playback if inputs belonged to the same chain.

HOMEPAGE
Код:
https://ampedsoftware.com/five





Download From Rapidgator

Код:
https://rapidgator.net/file/9132a61348a14cc17c548364319f66fa
Download From Nitroflare

Код:
http://nitroflare.com/view/1B8FCC3E6E41BE8/BaDshaH_AFPE19B13609.rar

BaDshaH вне форума   Ответить с цитированием
Старый 27.06.2019, 07:20   #8891
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию TunesKit Video Cutter 2.1.0.41 Multilingual



File size: 48.84 MB

TunesKit Video Cutter serves as an all-round video cutting solution to trim videos as well as audios, including MP4, MPEG, AVI, FLV, MP3, WMA, M4R, etc. into small segments and convert the video/audio clips to other popular formats. In addition to an easy-to-use video cutter, it can also be used as a smart video joiner that can merge multiple footages cutting from the same source into a brand new file with 100% original quality preserved.

Trim videos and audios losslessly and precisely
Wanna remove unwanted footage from a specific video without causing quality loss to the original file? No problem! TunesKit Video Cutter for Windows could be your best choice as it can split any video and audio into small files without losing any quality. Besides, being embedded with precise media cutting technique, it enables you to trim any video/audio as accurately as possible by setting the temporal interval to millisecond.

Merge different video segments into a new file
As a comprehensive video manager, TunesKit Video Cutter can not only cut video/audio, but also work as an intelligent video joiner to merge multiple video and audio clips from the same source video into a new file with just a few clicks. Simply select different segments and merge. Done.

Convert media cuttings to popular formats
While cutting the video and audio files to small pieces, TunesKit Video Cutter for Windows also provides the option for you to convert the splitted media clips to tons of commonly used formats, such as MP4, AVI, MPG, MPEG, 3GP, MKV, WMV, ASF, VRO, MP3, AAC, AC3, OGG, APE, etc. It's also a great tool to extract audio tracks from any video for you.

Edit splitted videos with diverse effects
With the built-in video editor, you can edit and customize the videos before cutting with flexible effects, including cropping, trimming, adding subtitles and watermarks, adjusting the contrast, and much more to make the videos more personalized.

Cut and save videos/audios for any device
You don't need to worry about the playback compatibility between the video cuttings and mobile devices, as TunesKit Video Cutter for Windows provides a full range of pre-set profiles for all popular portable devices and media players, including Apple, Samsung, game consoles, smart TV, and so forth. You can directly cut and save the videos/audios into any target device as expected.

Work at 60X faster speed with real-time preview
Like TunesKit's other products, this smart video cutting software is also equipped with advanced accelerator that makes the video cutter work at up to 60X speed, much faster than any competitive program in the market. In addition, to make the cutting more visualized, it embeds an instant media player so that you can make any change to the cuts at anytime as you want.

RELEASE NOTES
• official site does not provide any info about changes in this version.

HOMEPAGE
Код:
https://www.tuneskit.com





Download From Rapidgator

Код:
https://rapidgator.net/file/117e4001c3cfb3e602304996a564823f
Download From Nitroflare

Код:
http://nitroflare.com/view/5B681108423FA15/BaDshaH_TunesKit.Video.Cutter.2.1.0.41.rar

BaDshaH вне форума   Ответить с цитированием
Старый 27.06.2019, 07:45   #8892
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию Nitro Pro 12.16.3.574 Enterprise / Retail



File size: 655 MB (Total)

Create, edit and convert PDF files effortlessly with the help of this intuitive program that also allows users to accurately extracting text from PDFs thanks to its OCR function. Nitro Pro is one of the most advanced PDF creating and editing software solutions, providing basically all the tools you would ever need to help you in this regard. Although it's called 'Professional,' the application has been developed to be aimed at beginners and advanced users alike, so you won't find it too difficult to use.

Directly edit your PDF files more easily. Just click, and edit. Nitro Pro 12 enables you to edit entire paragraphs with ease, automatically reflowing text as you type - like you would in a word processor.
Nitro Pro is the complete Adobe Acrobat alternative. It enables you to do more with PDF through powerful tools. Create, convert, edit, combine, secure, annotate, form-fill, and save 100% industry-standard PDF files. Recipient of multiple best product awards, Nitro Pro is specifically designed for the business user. That makes working with PDF faster and easier than ever before!

Features:
Create + Combine
This program lets you quickly and easily create professional-quality PDF documents from any format or content type. From paper scans, spreadsheets, presentations, reports, and more.
Open, read and edit PDF files from other PDF applications, like Adobe Acrobat and Adobe Reader and other popular solutions.
Create from 300+ Formats
Combine Files to PDF
Print to PDF
Microsoft Office Add-ins
Preset and Custom Profiles
Create from Clipboard
PDF/A and Archival
Scan to PDF

Edit Text + Images.
Add, manipulate, replace, and correct text and images in PDF files with intuitive editing tools. Extract and delete individual pages from documents.
Edit Text
Edit Images
Edit Pages
Optimize Files
Bookmarks and Links
Watermarks, Headers and Footers
Apply Bates numbering when unique page labeling and identification is required across pages.

Convert + Export.
Nitro Pro 11 lets you easily reuse and repurpose text, images, or entire documents, with tools to accurately convert and extract PDF files and their content.
PDF to Word
PDF to Excel
PDF to Image
Export Text
Export Images
Batch Export
Extract Pages
Snapshot + Copy

Scan + OCR.
Apply Optical Character Recognition (OCR) to image and paper based documents and create searchable and/or editable layers of text for digital archival.
Searchable Text Layers
Editable Text Layers
Scan to PDF
Multi-language Support
Repurpose for Conversion

Collaborate + Review.
Review and markup PDF files faster with a range of text- and shape-based annotations. Easily involve multiple contributors with tools to track, sort, and manage individual comments.
Compatible With Adobe
Markup and Review
Sort and Manage Comments
Stamps
Shape and Pencil Markups
Attach Files

Nitro Cloud.
Send secure, legally binding eSignatures in seconds
Securely share documents via link or email
Review and markup documents online

Nitro Pro 12 New and Improved Features:
Convert with greater accuracy. When converting PDF to Excel and PowerPoint, you'll now enjoy more precise accuracy, faster results, and increased consistency in content, images, layout, colors, and fonts.
Seamlessly transition from desktop to cloud. The new Nitro Cloud integration enhances collaboration by equipping every Nitro Pro user with eSignature tools and the ability to quickly share documents via the cloud.
Access and share files quicker. The new OneDrive for Business connector enables you to save your PDFs directly to OneDrive. That makes it easy to create and share access links with colleagues.
Get creative with CAD. The compatibility of Nitro Pro with high-quality CAD drawings enables you to work with everything from blueprints to 3D models within your PDFs.
Skip the printer. Replace printing with more efficient, cost-effective digital workflows by leveraging Print Alternatives, which suggest Nitro features to use instead of printing when you open the print dialog box.
Multitask easier. Modify PDFs in fewer steps with the ability to drag-and-drop text and images between multiple open windows.
Get your documents signed faster. The new single-signer workflow makes it simple to prepare a PDF in Nitro Pro. Then send your document to a recipient via Nitro Cloud for fast, easy signature collection and real-time workflow tracking.
Verify digital signatures with simplicity. Chain of Trust support automates the identification of trusted contacts for quicker validation of digital signatures you receive.

Whats New
Код:
https://www.gonitro.com/nps/product-details/release-notes
HOMEPAGE
Код:
https://www.gonitro.com/


Enterprise

Код:
http://nitroflare.com/view/4FBD689B3724F8C/BaDhaH_Nitro.Pro.12.16.3.574.Enterprise_x64.rar
http://nitroflare.com/view/4B33D3878A05166/BaDshaH_Nitro.Pro.12.16.3.574.Enterprise.rar

https://rapidgator.net/file/579eba74c625efc473ff122dea8216cb
https://rapidgator.net/file/007b14f69ad1c10df76607004d2bbb9e
Retail

Код:
http://nitroflare.com/view/6B1632321386D1D/BaDshaH_Nitro.Pro.12.16.3.574.Retail.rar
http://nitroflare.com/view/04DA8A8C512B44B/BaDshaH_Nitro.Pro.12.16.3.574.Retail_x64.rar

https://rapidgator.net/file/9cc8b40a8f4e103ebd4db4b13ad35fa8
https://rapidgator.net/file/f882db482f7f34b9f5c72ff7c4109e90
BaDshaH вне форума   Ответить с цитированием
Старый 27.06.2019, 07:48   #8893
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию SoftOrbits Photo Stamp Remover 10.2 Multilingual



Languages: Multilingual | File Size: 26.29 MB

Photo Stamp Remover is a photo correction utility that can remove watermarks, date stamps and other unwanted objects that appear on photographs. Offering a fully automatic process, the program uses an intelligent restoration technology to fill the selected area with the texture generated from the pixels around the selection, so that the defect blends into the rest of the image naturally. What takes hours to correct using the clone tool, can be accomplished in a minute using Photo Stamp Remover.

Remove unwanted artifacts from new photos
Using Photo Stamp Remover, you can erase cleanly unwanted artifacts like date stamps, watermarks, logos and undesirable objects. Face and skin imperfections, such as wrinkles, acne, and tattoos can be cleaned up too. The area with the removed artifact is filled with automatically generated texture. So, the photo looks natural, as if it had always looked like this.

Rejuvenate old photos
Most families have hundreds of photos that they would like to preserve for a lifetime of enjoyment. Unfortunately, many of them sit in albums, books, or lay loose in boxes, getting scratches and accumulating dirt. Fortunately, there's Photo Stamp Remover. Just scan photos into the computer and use the watermark remover to clean up scratches, cracks, and dust spots.

Remove defects with a mouse click
With Photo Stamp Remover, you can restore photos with the minimum of fuss. Just open a photo in the program, select the area that needs to be restored and click Preview. If you like what you see, click Start. That's basically all you need to do. Using its advanced restoration algorithm, the program removes the imperfection automatically. Defects blend into the background cleanly.

Retouch more than one photo
With its batch mode support, watermark remover enables you to process more than one photo at a time. For example, you can remove a date stamp, which your camera left on several photos. Simply define the area where the stamp is located and begin the healing process. Photo Stamp Remover will remove the date stamp on all photos automatically while you're sipping your coffee.

Remove artifacts by color
You can select the unwanted artifact manually or select the color and watermark remover will remove the artifact that has the same color. For example, it can help you to remove from a photograph text and date stamps that have the same, solid black color.

No need to install large photo editors
Photo Stamp Remover is primarily aimed at everyday, casual camera owners who just want to remove some imperfections from photos without having to buy a more feature-rich photo editing suite and mess around with its user manual to get started.

RELEASE NOTES:
- Release notes were unavailable when this listing was updated.

Requirements: 2000/XP/2003/Vista/7/8/10.

SCREENSHOTS
[Ссылки доступны только зарегистрированным пользователям . Регистрируйся тут...]

HOMEPAGE
Код:
https://www.softorbits.com





Download From Rapidgator

Код:
https://rapidgator.net/file/9464fbea1d0bc46e6d421c9165f38d68
Download From Nitroflare

Код:
http://nitroflare.com/view/4B30442FB7A3604/BaDshaH_Photo.Stamp.Remover.10.2.rar
BaDshaH вне форума   Ответить с цитированием
Старый 27.06.2019, 07:50   #8894
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию Alfa eBooks Manager Pro / Web 8.1.27.3 Multilingual



Languages: Multilingual | File Size: 31.26 MB

Alfa eBooks Manager - The most powerful and easy-to-use Book Organizer. Alfa is a PC software that allows to organize your electronic and paper books in a single e-Library. Alfa eBooks Manager is the top choice for book lovers, collectors, students, academicians and business libraries.

Create e-Library
Get your paper, electronic and audio-books in single e-library.

Catalog books
Catalog any book data. Add tags and custom fields.

Customize design
Customize look and feel of your e-Library.

Scan computer for ebooks
Scan your computer for ebooks, parse metadata.

Read e-Books
Built-in ebook reader supports all popular e-book formats.

Update from the Web
Update books from Amazon, Google and other sites.

Edit ebook metadata
All popular formats are supported: EPUB, MOBI, FB2, PDF, AZW.

Ebook converter
Convert ebooks for your Kindle, iPhone or Android reader.

View books in 3D
Play with realistic 3D-models of your favorite books.

Import from Calibre
Alfa is the best Calibre alternative for those who like comfort.

Web Interface
Access you library in local network even from mobile devices.

Manage audio books
Quickly add, organize audio books. Built-in audiobook player.

RELEASE NOTES:
- May include unspecified updates, enhancements, or bug fixes.

System Requirements:
The program works on Windows 7/8/10 and you need .Net Framework 4.6 (or later) installed

HOMEPAGE
Код:
https://www.alfaebooks.com





Download From Rapidgator

Код:
https://rapidgator.net/file/40ce8cdf49bf1a47b4fc8aaa31f6d25f
Download From Nitroflare

Код:
http://nitroflare.com/view/A2C28143C5B9B00/BaDshaH.Alfa.8.1.27.3.rar

BaDshaH вне форума   Ответить с цитированием
Старый 27.06.2019, 07:52   #8895
BaDshaH
Заблокирован
 
Регистрация: 23.04.2018
Сообщений: 16,196
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
BaDshaH пока не определено
По умолчанию Scrivener 1.9.10.0 Multilingual



Languages: Multilingual | File Size: 91.8 MB

Scrivener is a powerful content-generation tool for writers that allows you to concentrate on composing and structuring long and difficult documents. While it gives you complete control of the formatting, its focus is on helping you get to the end of that awkward first draft.

Your complete writing studio
Writing a novel, research paper, script or any long-form text involves more than hammering away at the keys until you're done. Collecting research, ordering fragmented ideas, shuffling index cards in search of that elusive structure-most writing software is fired up only after much of the hard work is over. Enter Scrivener: a word processor and project management tool that stays with you from that first, unformed idea all the way through to the final draft. Outline and structure your ideas, take notes, view research alongside your writing and compose the constituent pieces of your text in isolation or in context. Scrivener won't tell you how to write-it just makes all the tools you have scattered around your desk available in one application.

Write, structure, revise
Scrivener puts everything you need for structuring, writing and editing long documents at your fingertips. On the left of the window, the "binder" allows you to navigate between the different parts of your manuscript, your notes, and research materials, with ease. Break your text into pieces as small or large as you want-so you can forget wrestling with one long document. Restructuring your draft is as simple as drag and drop. Select a single document to edit a section of your manuscript in isolation, or use "Scrivenings" mode to work on multiple sections as though they were one: Scrivener makes it easy to switch between focussing on the details and stepping back to get a wider view of your composition.

With access to a powerful underlying text engine, you can add tables, bullet points, images and mark up your text with comments and footnotes. Format as you go using the format bar at the top of the page, or use any font you want for the writing and let Scrivener reformat your manuscript after you're done-allowing you to concentrate on the words rather than their presentation.

Create order from chaos
Most word processors approach composing a long-form text the same as typing a letter or flyer-they expect you to start on page one and keep typing until you reach the end. Scrivener lets you work in any order you want and gives you tools for planning and restructuring your writing. In Scrivener, you can enter a synopsis for each document on a virtual index card and then stack and shuffle the cards in the corkboard until you find the most effective sequence. Plan out your work in Scrivener's outliner and use the synopses you create as prompts while you write.

Or just get everything down into a first draft and break it apart later for rearrangement on the outliner or corkboard. Create collections of documents to read and edit related text without affecting its place in the overall draft; label and track connected documents or mark what still needs to be done. Whether you like to plan everything in advance, write first and structure later-or do a bit of both-Scrivener supports the way you work.

Your research-always within reach
No more switching between multiple applications to refer to research files: keep all of your background material-images, PDF files, movies, web pages, sound files-right inside Scrivener. And unlike other programs that only let you view one document at a time, in Scrivener you can split the editor to view research in one pane while composing your text right alongside it in another. Transcribe an interview or conversation, make notes on an image or article, or just refer back to another chapter, all without leaving the document you're working on.

Getting it out there
Scrivener provides all the tools you need to prepare your manuscript for submission or self-publishing. Once you're ready to go, control everything from how footnotes, headers and footers appear to fine-tuning the formatting of each level of your draft-or keep it simple by choosing from one of Scrivener's convenient presets. Print a novel using standard manuscript formatting. Export your finished document to a wide variety of file formats, including Microsoft Word, RTF, PDF and HTML-making it easy to share your work with others. Or self-publish by exporting to ePub or Kindle* formats to share your work via iBooks or Amazon, or for reading on any e-reader.

Who Uses Scrivener?
Scrivener is used by all sorts of professional and amateur writers, from best-selling and aspiring novelists to Hollywood scriptwriters, from students and academics to lawyers and journalists: anyone who works on long and difficult writing projects. While many other writing project management tools impose their own workflows or limit themselves to fiction-writing, Scrivener recognises that all writers of long-form texts often face similar problems, and provides an array of flexible tools that allow you to do things your way, no matter what kind of writing you do.

Those currently using Scrivener include:
- Novelists
- Short-Story Writers
- Screenwriters
- Playwrights
- Comedians
- Lawyers
- Journalists
- Lecturers
- Academics and Students
- Biographers and Memoirists
- Business and Technical Writers
- Comics and Graphic Novel Writers
- Translators
- And more.

RELEASE NOTES:
- Scrivener's licensing and activation system has been updated to work with our new e-commerce provider, Paddle.

Requirements: Scrivener requires Windows XP (SP3), Vista, Windows 7, 8.1 or 10.

HOMEPAGE
Код:
http://www.literatureandlatte.com





Download From Rapidgator

Код:
https://rapidgator.net/file/67cd24ebbd3f0877a0211768bedb56a9
Download From Nitroflare

Код:
http://nitroflare.com/view/6BA392D1B795C8C/BaDshaH.Scrivener.1.9.10.0.rar

BaDshaH вне форума   Ответить с цитированием
Ответ

Любые журналы Актион-МЦФЭР регулярно !!! Пишите https://www.nado.in/private.php?do=newpm&u=12191 или на электронный адрес pantera@nado.ws


Здесь присутствуют: 4 (пользователей: 0 , гостей: 4)
 
Опции темы

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход

Похожие темы
Тема Автор Раздел Ответов Последнее сообщение
Schlumberger Groundwater Software 2014.2 lasavn Различный софт 0 21.04.2015 03:54
Schlumberger Groundwater Software 2014.2 lasavn Различный софт 0 18.04.2015 04:28
Schlumberger Groundwater Software 2014.2 lasavn Различный софт 0 15.04.2015 05:11
Schlumberger Groundwater Software 2014.2 lasavn Различный софт 0 12.04.2015 05:36
TrueCafe Internet Cafe Software 6.0.1304.10 Multilingual sonaslan_1989 Различный софт 0 09.04.2015 18:40


Текущее время: 02:13. Часовой пояс GMT +1.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc. Перевод: zCarot