TMG Solvers (Revision 2020-11-20) Updates | 741.7 mb
The Siemens PLM Software team has released an updated versions to module TMG Thermal/Flow Simulation (NXCAE_EXTRAS) for NX Series software, is used to advanced modeling of heat transfer and flow of liquid and gas flows.
=
TMG Version 2019.1.17
=
** Bug
* [TF-4632] - Parallel flow solver fatal errors: At least one NaN has been detected in the solution vector of DEL_ENTHALPY / TKE_DELTA
* [TF-5152] - Validation case VVF4 (Power-Law) - degradation in results
* [TF-6027] - Coupled thermal-flow model that requires a large size of memory to allocate fails at initialization
* [TF-7226] - Investigate QUICK advection scheme for the turbulence equations
* [TF-7859] - Fan Curve Operating Point Summary is not printed to the log file when the parallel flow solver is used
* [TF-7971] - Wrong increments and misplaced thermal results when the coupling time option is structural time step, solution step end time, or user-specified time step, and the step's output flag is all coupling times for MP Thermal-Flow-Structural
* [TF-7992] - Wrong mass flow rates in htm report at an intermediate location along a pipe when the cross section plane coincides with element faces
=
TMG Version 2019.2.16
=
** Bug
* [TF-6367] - Fluid plugin QA's fail due to compiler version mismatch
* [TF-8353] - Femap: Boundary condition mapping fails for long file paths
* [TF-8477] - FSI simulation with thin boundary layer mesh produces no displacement and no transfer force
* [TF-8577] - Large MP thermal-structural model crashes analyz.exe while performing results postprocessing
* [TF-8593] - Parallel flow solver errors out for a pressure rise inlet with specified external absolute pressure
* [TF-8637] - Incorrect FACE_SET_AREA values in flow.ibd file for IBM models with multiple octree meshes
* [TF-8643] - Thermal/flow solver crashes when the parallel configuration file contains an invalid computer name
* [TF-8672] - Parallel flow solver crashes for a multi-enclosure model containing an immiscible fluid mixture and a pure substance fluid
* [TF-8698] - Weighted-average values are incorrectly computed for 3D flow data report
* [TF-8721] - Coupled thermal/flow solution hangs in the first iteration if no convection couplings from solid to fluid are present
* [TF-8761] - A screen that overlaps both the primary and secondary regions of a Disjoint Fluid Mesh Pairing SSSO should produce a fatal error instead of a crash
* [TF-8762] - An internal fan that overlaps both the primary and secondary regions of a Disjoint Fluid Mesh Pairing SSSO should produce a more descriptive fatal error
* [TF-8780] - Implement a fatal error when a Disjoint Fluid Mesh Pairing SSSO is defined at the interface of a Moving Frame of Reference SSSO
* [TF-8836] - The Disjoint Fluid Mesh Pairing SSSO is not properly supported in the Simcenter 3D Multiphysics solver environment
** New Feature
* [TF-8657] - Migrate changes in xana2action and xana2printout down to NX12
=
TMG Version 2020.1.12
=
** Bug
* [TF-6367] - Fluid plugin QA's fail due to compiler version mismatch
* [TF-8327] - Coupled multiphysics simulation does not converge when first solution step is defined as steady state
* [TF-8353] - Femap: Boundary condition mapping fails for long file paths
* [TF-8477] - FSI simulation with thin boundary layer mesh produces no displacement and no transfer force
* [TF-8577] - Large MP thermal-structural model crashes analyz.exe while performing results postprocessing
* [TF-8593] - Parallel flow solver errors out for a pressure rise inlet with specified external absolute pressure
* [TF-8637] - Incorrect FACE_SET_AREA values in flow.ibd file for IBM models with multiple octree meshes
* [TF-8643] - Thermal/flow solver crashes when the parallel configuration file contains an invalid computer name
* [TF-8647] - Laplacian mesh mover results in bad elements when a thin boundary layer mesh is used
* [TF-8651] - Investigate VUFAC performance degradation with the latest tmgver2020.2
* [TF-8665] - MayaMonitor.exe does not terminate if nx2tmg.exe crashes
* [TF-8672] - Parallel flow solver crashes for a multi-enclosure model containing an immiscible fluid mixture and a pure substance fluid
* [TF-8698] - Weighted-average values are incorrectly computed for 3D flow data report
* [TF-8702] - Fluid pressure forces on 2D shells are not transferred to the structure for FSI simulation
* [TF-8710] - Incorrect HTC at the duct entrance for HTCFORCE() correlation
* [TF-8721] - Coupled thermal/flow solution hangs in the first iteration if no convection couplings from solid to fluid are present
* [TF-8761] - A screen that overlaps both the primary and secondary regions of a Disjoint Fluid Mesh Pairing SSSO should produce a fatal error instead of a crash
* [TF-8762] - An internal fan that overlaps both the primary and secondary regions of a Disjoint Fluid Mesh Pairing SSSO should produce a more descriptive fatal error
* [TF-8766] - FSI simulation run in parallel crashes at the end when all time steps are done
* [TF-8780] - Implement a fatal error when a Disjoint Fluid Mesh Pairing SSSO is defined at the interface of a Moving Frame of Reference SSSO
* [TF-8836] - The Disjoint Fluid Mesh Pairing SSSO is not properly supported in the Simcenter 3D Multiphysics solver environment
** New Feature
* [TF-8231] - Support hybrid wall function in a 2-way FSI simulation
* [TF-8705] - Create two separate parameters for BC data summary in the advanced parameters catalog
** Improvement
* [TF-8714] - As a developer I would like to write solver and solution info into SolverData.h5 as attributes
* [TF-8734] - As a developer I would like to re-write the GCL source term for the pressure equation for ideal gases using an implicit discretization
TMG Version 2020.2.6
** Bug
* [TF-6367] - Fluid plugin QA's fail due to compiler version mismatch
* [TF-7982] - Femap Thermal/Flow: Improve and introduce new safeguards against crashing
* [TF-8353] - Femap: Boundary condition mapping fails for long file paths
* [TF-8390] - IBM Pre-Processor errors out for multi-enclosure IBM models containing internal fans
* [TF-8477] - FSI simulation with thin boundary layer mesh produces no displacement and no transfer force
* [TF-8517] - MayaMonitor.exe does not exit gracefully when solution is aborted
* [TF-8577] - Large MP thermal-structural model crashes analyz.exe while performing results postprocessing
* [TF-8593] - Parallel flow solver errors out for a pressure rise inlet with specified external absolute pressure
* [TF-8602] - Total temperature effects applied to 0D duct elements crashes analyz.exe
* [TF-8637] - Incorrect FACE_SET_AREA values in flow.ibd file for IBM models with multiple octree meshes
* [TF-8638] - Investigate IBM models with internal fan and multiple octree meshes
* [TF-8643] - Thermal/flow solver crashes when the parallel configuration file contains an invalid computer name
* [TF-8647] - Laplacian mesh mover results in bad elements when a thin boundary layer mesh is used
* [TF-8651] - Investigate VUFAC performance degradation with the latest tmgver2020.2
* [TF-8656] - "No. of machines available for parallel run of VUFAC" should only be printed once when a model contains articulation
* [TF-8660] - Mapped temperatures are computed incorrectly for mixed order source elements
* [TF-8662] - Mesh deformation is not displayed in the Solution Control Monitor for coupled multiphysics simulations run in parallel
* [TF-8665] - MayaMonitor.exe does not terminate if nx2tmg.exe crashes
* [TF-8672] - Parallel flow solver crashes for a multi-enclosure model containing an immiscible fluid mixture and a pure substance fluid
* [TF-8698] - Weighted-average values are incorrectly computed for 3D flow data report
* [TF-8702] - Fluid pressure forces on 2D shells are not transferred to the structure for FSI simulation
* [TF-8710] - Incorrect HTC at the duct entrance for HTCFORCE() correlation
* [TF-8721] - Coupled thermal/flow solution hangs in the first iteration if no convection couplings from solid to fluid are present
* [TF-8732] - Aeroengine model with thermal streams junctions crashes analyz.exe
* [TF-8738] - Aeroengine model with thermal streams junctions exhibits convergence issues
* [TF-8761] - A screen that overlaps both the primary and secondary regions of a Disjoint Fluid Mesh Pairing SSSO should produce a fatal error instead of a crash
* [TF-8762] - An internal fan that overlaps both the primary and secondary regions of a Disjoint Fluid Mesh Pairing SSSO should produce a more descriptive fatal error
* [TF-8766] - FSI simulation run in parallel crashes at the end when all time steps are done
* [TF-8780] - Implement a fatal error when a Disjoint Fluid Mesh Pairing SSSO is defined at the interface of a Moving Frame of Reference SSSO
* [TF-8836] - The Disjoint Fluid Mesh Pairing SSSO is not properly supported in the Simcenter 3D Multiphysics solver environment
* [TF-8840] - Support thermal streams junction names in the thermal solver for tmgver2020.2
* [TF-8860] - DATACH module produces incorrect fatal error for thermal streams junction defined between face and edge streams
** New Feature
* [TF-6831] - Femap Migration: Licensing modification to the Advanced Thermal/Flow analysis type
* [TF-8231] - Support hybrid wall function in a 2-way FSI simulation
* [TF-8627] - Use keys "+" and "-" to zoom in and out for Solution Control Monitor
* [TF-8705] - Create two separate parameters for BC data summary in the advanced parameters catalog
** Improvement
* [TF-8519] - Translate thermal streams junction names from XML to INPF
* [TF-8714] - As a developer I would like to write solver and solution info into SolverData.h5 as attributes
* [TF-8724] - Implement shear rate results for Newtonian fluids
* [TF-8734] - As a developer I would like to re-write the GCL source term for the pressure equation for ideal gases using an implicit discretization
TMG Thermal/Flow Simulation (NXCAE_EXTRAS) module provides heat transfer solutions and is an add-on module to either NX Advanced FEM or NX Advanced Simulation. NX Thermal can simulate conduction, convection and radiation phenomena for complex products and large assemblies. NX Thermal is used to address thermal analysis requirements in a wide range of industries including aerospace and defense, automotive and transportation, consumer products and appliances, energy, medical, electronics and semiconductors. In addition, NX Thermal can also be used with NX Flow, the NX-integrated CFD solution, for coupled thermo-fluid simulation.
NX Thermal continues Siemens' long heritage in thermal simulation and leverages the same technology that underpinned the I-deas TMG solution. NX Thermal uses high-order finite volume-based technology on a FE mesh to accurately and efficiently simulate heat transfer phenomenon. It combines the versatility of FE-based analysis with the accuracy of a finite volume scheme. The NX Thermal solver technology allows simulation of NX parts and assemblies within complex thermal environments.
Siemens PLM Software. is a world-leading provider of product lifecycle management and manufacturing operations management software. We help thousands of companies realize innovation by optimizing their processes, from planning and development through manufacturing, production and support
Product: TMG Solvers
Version: (Revision 2020-11-20) Updates *
Supported Architectures: x64
Website Home Page :
Код:
http://www.plm.automation.siemens.com
Language: english
System Requirements: PC **
Software Prerequisites: Siemens NX 1847/1872/1899/1926 with NXCAE_EXTRAS module
Size: 741.7 mb
tmg v2019.1.17 for NX-1847 Series (1847-1867.x) Win64 (2020-07-08)
tmg v2019.2.16 for NX-1872 Series (1872-1892.x) Win64 (2020-11-20)
tmg v2020.1.12 for NX-1899 Series (1899-1919.x) Win64 (2020-11-20)
tmg v2020.2.6 for NX-1926 Series (1926-1946.x) Win64 (2020-11-20)
When running module TMG Thermal/Flow Simulation (NXCAE_EXTRAS) in the NX series platforms, the minimum requirements are superseded by the minimum requirements listedfor those platforms.
-:DOWNLOAD FROM LINKS:-
RapidGator
Код:
https://rapidgator.net/file/7abd6ef916d3d060447a094ce64c9204/NX1847Series.rar.html
https://rapidgator.net/file/23d54a06a6e5c3fd81c5f2d001c90224/NX1872Series.rar.html
https://rapidgator.net/file/ece50475be99b4ce0ba593f61756cfd6/NX1899Series.rar.html
https://rapidgator.net/file/b0b74b6b8d2a5be4baff0928162230e0/NX1926Series.rar.html
NitroFlare
Код:
https://nitroflare.com/view/789709B4FA7C147/NX1847Series.rar
https://nitroflare.com/view/C254DB90EF8B6C0/NX1872Series.rar
https://nitroflare.com/view/3D66FFC85369FD2/NX1899Series.rar
https://nitroflare.com/view/89A80DB1EF3E4BF/NX1926Series.rar
DBConvert Studio v1.8.4
