25.09.2020, 14:45
|
#1
|
|
Заблокирован
Регистрация: 01.10.2019
Сообщений: 3,773
Сказал(а) спасибо: 0
Поблагодарили 2 раз(а) в 2 сообщениях
|
Scania Diagnos Programmer SDP3 2.44.1 + 2.44.3 Multilinguage
Scania Diagnos Programmer SDP3 2.44.1 + 2.44.3 Multilingual | 1.68 GB
Цитата:
The program used to find and fix faults trucks and buses Scania brand, the settings preferred by the customer, perform calibrations, performance upgrades that affect the electrical system, and the software update management unit
Extras. Information: The distribution two versions. 2.44.1 and 2.44.3
Set any desired / required.
Serviceability checked on Windows 7 64 bit.
For the diagnosis or need VCI2 VCI3 adapter.
installation
1. Run the file tmode
2. Run the file _prereqset6v3
3. Restart the computer
4. Set Scania Diagnos & Programmer 3 2.44.1 or 2.44.3
5. Install the system meets both the driver.
6. Run "Hardware ID Reader" to copy the ID machine
7. Run the "Protection REG" to insert the ID machine -> press "Decode Fingerprint" -> click "Generate" -> in the same .reg file appears in the folder
8. Run the .reg file
9. Copy the two files from the fix folder and replace the files in the folder with the installed program.
10. Restart the computer.
Year / Release Date: 2020
Version: 2.44.1 + 2.44.3
System requirements: System requirements applicable to SDP3 The, can be found on the website of Technical Information Library, access to which can be accessed via Reflex.
To use the program you need a computer, USB key and VCI. For normal operation of the components of the program must meet certain system requirements. For more information, see. See "System requirements"
Language: Multilingual (Russian present)
Medicine: Present
|
|
|
|
